drivers: pwm: Add shim for nrfx PWM HW driver
Adds a translation layer to make the nrfx driver for nrf52 PWM peripheral accessible via the Zephyr's API. Signed-off-by: Justin DeMartino <jdemarti@gmail.com>
This commit is contained in:
Justin DeMartino
Carles Cufí
parent
7a7e4f5832
commit
cfc18f2102
7 changed files with 555 additions and 18 deletions
|
|
@ -5,6 +5,7 @@ zephyr_library_sources_ifdef(CONFIG_PWM_DW pwm_dw.c)
|
|||
zephyr_library_sources_ifdef(CONFIG_PWM_QMSI pwm_qmsi.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_PWM_STM32 pwm_stm32.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_PWM_NRF5_SW pwm_nrf5_sw.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_PWM_NRFX pwm_nrfx.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_PWM_MCUX_FTM pwm_mcux_ftm.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_PWM_LED_ESP32 pwm_led_esp32.c)
|
||||
|
||||
|
|
|
|||
|
|
@ -55,6 +55,8 @@ source "drivers/pwm/Kconfig.stm32"
|
|||
|
||||
source "drivers/pwm/Kconfig.nrf5_sw"
|
||||
|
||||
source "drivers/pwm/Kconfig.nrfx"
|
||||
|
||||
source "drivers/pwm/Kconfig.mcux_ftm"
|
||||
|
||||
source "drivers/pwm/Kconfig.esp32"
|
||||
|
|
|
|||
299
drivers/pwm/Kconfig.nrfx
Normal file
299
drivers/pwm/Kconfig.nrfx
Normal file
|
|
@ -0,0 +1,299 @@
|
|||
# Copyright (c) 2018, Cue Health Inc
|
||||
#
|
||||
# SPDX-License-Identifier: Apache-2.0
|
||||
#
|
||||
|
||||
menuconfig PWM_NRFX
|
||||
bool "nRF PWM nrfx driver"
|
||||
depends on SOC_SERIES_NRF52X
|
||||
help
|
||||
Enable support for nrfx Hardware PWM driver for nRF52 MCU series.
|
||||
|
||||
if PWM_NRFX
|
||||
|
||||
if PWM_0
|
||||
|
||||
config PWM_0_NAME
|
||||
string "PWM module 0 device name"
|
||||
default "PWM_0"
|
||||
help
|
||||
Specify the device name for the Nordic Semiconductor nRF52 series HW
|
||||
PWM module 0.
|
||||
|
||||
config PWM_0_NRF_CLOCK_PRESCALER
|
||||
int "Clock prescaler"
|
||||
range 0 7
|
||||
default 0
|
||||
help
|
||||
Clock = 16MHz / (2^prescaler).
|
||||
|
||||
config PWM_0_NRF_CH0_PIN
|
||||
int "CH0 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH0 (set to -1 if not used).
|
||||
|
||||
config PWM_0_NRF_CH0_INVERTED
|
||||
bool "CH0 inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_0_NRF_CH1_PIN
|
||||
int "CH1 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH1 (set to -1 if not used).
|
||||
|
||||
config PWM_0_NRF_CH1_INVERTED
|
||||
bool "CH1 inverted"
|
||||
default n
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_0_NRF_CH2_PIN
|
||||
int "CH2 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH2 (set to -1 if not used).
|
||||
|
||||
config PWM_0_NRF_CH2_INVERTED
|
||||
bool "CH2 inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_0_NRF_CH3_PIN
|
||||
int "CH3 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH3 (set to -1 if not used).
|
||||
|
||||
config PWM_0_NRF_CH3_INVERTED
|
||||
bool "CH3 Inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
endif # PWM_0
|
||||
|
||||
if PWM_1
|
||||
|
||||
config PWM_1_NAME
|
||||
string "PWM module 1 device name"
|
||||
default "PWM_1"
|
||||
help
|
||||
Specify the device name for the Nordic Semiconductor nRF52 series HW
|
||||
PWM module 1.
|
||||
|
||||
config PWM_1_NRF_CLOCK_PRESCALER
|
||||
int "Clock prescaler"
|
||||
range 0 7
|
||||
default 0
|
||||
help
|
||||
Clock = 16MHz / (2^prescaler).
|
||||
|
||||
config PWM_1_NRF_CH0_PIN
|
||||
int "CH0 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH0
|
||||
|
||||
config PWM_1_NRF_CH0_INVERTED
|
||||
bool "CH0 inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_1_NRF_CH1_PIN
|
||||
int "CH1 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH1 (set to -1 if not used).
|
||||
|
||||
config PWM_1_NRF_CH1_INVERTED
|
||||
bool "CH1 inverted"
|
||||
default n
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_1_NRF_CH2_PIN
|
||||
int "CH2 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH2 (set to -1 if not used).
|
||||
|
||||
config PWM_1_NRF_CH2_INVERTED
|
||||
bool "CH2 inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_1_NRF_CH3_PIN
|
||||
int "CH3 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH3 (set to -1 if not used).
|
||||
|
||||
config PWM_1_NRF_CH3_INVERTED
|
||||
bool "CH3 Inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
endif # PWM_1
|
||||
|
||||
|
||||
if PWM_2
|
||||
|
||||
config PWM_2_NAME
|
||||
string "PWM module 2 device name"
|
||||
default "PWM_2"
|
||||
help
|
||||
Specify the device name for the Nordic Semiconductor nRF52 series HW
|
||||
PWM module 2.
|
||||
|
||||
config PWM_2_NRF_CLOCK_PRESCALER
|
||||
int "Clock prescaler"
|
||||
range 0 7
|
||||
default 0
|
||||
help
|
||||
Clock = 16MHz / (2^prescaler).
|
||||
|
||||
config PWM_2_NRF_CH0_PIN
|
||||
int "CH0 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH0 (set to -1 if not used).
|
||||
|
||||
config PWM_2_NRF_CH0_INVERTED
|
||||
bool "CH0 inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_2_NRF_CH1_PIN
|
||||
int "CH1 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH1 (set to -1 if not used).
|
||||
|
||||
config PWM_2_NRF_CH1_INVERTED
|
||||
bool "CH1 inverted"
|
||||
default n
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_2_NRF_CH2_PIN
|
||||
int "CH2 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH2 (set to -1 if not used).
|
||||
|
||||
config PWM_2_NRF_CH2_INVERTED
|
||||
bool "CH2 inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_2_NRF_CH3_PIN
|
||||
int "CH3 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH3 (set to -1 if not used).
|
||||
|
||||
config PWM_2_NRF_CH3_INVERTED
|
||||
bool "CH3 Inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
endif # PWM_2
|
||||
|
||||
if PWM_3
|
||||
|
||||
config PWM_3_NAME
|
||||
string "PWM module 3 device name"
|
||||
default "PWM_3"
|
||||
help
|
||||
Specify the device name for the Nordic Semiconductor nRF52 series HW
|
||||
PWM module 3.
|
||||
|
||||
config PWM_3_NRF_CLOCK_PRESCALER
|
||||
int "Clock prescaler"
|
||||
range 0 7
|
||||
default 0
|
||||
help
|
||||
Clock = 16MHz / (2^prescaler).
|
||||
|
||||
config PWM_3_NRF_CH0_PIN
|
||||
int "CH0 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH0 (set to -1 if not used).
|
||||
|
||||
config PWM_3_NRF_CH0_INVERTED
|
||||
bool "CH0 inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_3_NRF_CH1_PIN
|
||||
int "CH1 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH1.
|
||||
|
||||
config PWM_3_NRF_CH1_INVERTED
|
||||
bool "CH1 inverted"
|
||||
default n
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_3_NRF_CH2_PIN
|
||||
int "CH2 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH2 (set to -1 if not used).
|
||||
|
||||
config PWM_3_NRF_CH2_INVERTED
|
||||
bool "CH2 inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
config PWM_3_NRF_CH3_PIN
|
||||
int "CH3 pin number"
|
||||
range -1 47 if SOC_NRF52840_QIAA
|
||||
range -1 31
|
||||
default -1
|
||||
help
|
||||
GPIO pin number to use for CH3 (set to -1 if not used).
|
||||
|
||||
config PWM_3_NRF_CH3_INVERTED
|
||||
bool "CH3 Inverted"
|
||||
help
|
||||
Inverses the polarity.
|
||||
|
||||
endif # PWM_3
|
||||
|
||||
endif # PWM_NRFX
|
||||
232
drivers/pwm/pwm_nrfx.c
Normal file
232
drivers/pwm/pwm_nrfx.c
Normal file
|
|
@ -0,0 +1,232 @@
|
|||
/*
|
||||
* Copyright (c) 2018, Cue Health Inc
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
#include <nrfx_pwm.h>
|
||||
#include <pwm.h>
|
||||
|
||||
#define SYS_LOG_DOMAIN "pwm_nrfx"
|
||||
#define SYS_LOG_LEVEL CONFIG_SYS_LOG_PWM_LEVEL
|
||||
#include <logging/sys_log.h>
|
||||
|
||||
#define PWM_NRFX_CH_VALUE_NORMAL (1UL << 15)
|
||||
#define PWM_NRFX_CH_VALUE_INVERTED (0)
|
||||
|
||||
struct pwm_nrfx_config {
|
||||
nrfx_pwm_t pwm;
|
||||
nrfx_pwm_config_t config;
|
||||
nrf_pwm_sequence_t seq;
|
||||
};
|
||||
|
||||
struct pwm_nrfx_data {
|
||||
u16_t current[NRF_PWM_CHANNEL_COUNT];
|
||||
u16_t top_value;
|
||||
};
|
||||
|
||||
static int pwm_nrfx_pin_set(struct device *dev, u32_t pwm,
|
||||
u32_t period_cycles, u32_t pulse_cycles)
|
||||
{
|
||||
const struct pwm_nrfx_config *pconfig = dev->config->config_info;
|
||||
struct pwm_nrfx_data *pdata = dev->driver_data;
|
||||
|
||||
if (pwm >= NRF_PWM_CHANNEL_COUNT) {
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (period_cycles != pdata->top_value) {
|
||||
if (period_cycles > PWM_COUNTERTOP_COUNTERTOP_Msk) {
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
pdata->top_value = period_cycles;
|
||||
nrf_pwm_configure(pconfig->pwm.p_registers,
|
||||
pconfig->config.base_clock,
|
||||
pconfig->config.count_mode,
|
||||
pdata->top_value);
|
||||
}
|
||||
|
||||
if (pulse_cycles > pdata->top_value) {
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Modify only the COMPARE bits while preserving the POLARITY
|
||||
* bit that controls the inversion of the channel.
|
||||
* For more details see product specification.
|
||||
*/
|
||||
pdata->current[pwm] = ((pdata->current[pwm]
|
||||
& ~PWM_COUNTERTOP_COUNTERTOP_Msk)
|
||||
| pulse_cycles);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pwm_nrfx_get_cycles_per_sec(struct device *dev, u32_t pwm,
|
||||
u64_t *cycles)
|
||||
{
|
||||
const struct pwm_nrfx_config *pconfig = dev->config->config_info;
|
||||
|
||||
switch (pconfig->config.base_clock) {
|
||||
case NRF_PWM_CLK_16MHz:
|
||||
*cycles = 16ul * 1000ul * 1000ul;
|
||||
break;
|
||||
case NRF_PWM_CLK_8MHz:
|
||||
*cycles = 8ul * 1000ul * 1000ul;
|
||||
break;
|
||||
case NRF_PWM_CLK_4MHz:
|
||||
*cycles = 4ul * 1000ul * 1000ul;
|
||||
break;
|
||||
case NRF_PWM_CLK_2MHz:
|
||||
*cycles = 2ul * 1000ul * 1000ul;
|
||||
break;
|
||||
case NRF_PWM_CLK_1MHz:
|
||||
*cycles = 1ul * 1000ul * 1000ul;
|
||||
break;
|
||||
case NRF_PWM_CLK_500kHz:
|
||||
*cycles = 500ul * 1000ul;
|
||||
break;
|
||||
case NRF_PWM_CLK_250kHz:
|
||||
*cycles = 250ul * 1000ul;
|
||||
break;
|
||||
case NRF_PWM_CLK_125kHz:
|
||||
*cycles = 125ul * 1000ul;
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct pwm_driver_api pwm_nrfx_drv_api_funcs = {
|
||||
.pin_set = pwm_nrfx_pin_set,
|
||||
.get_cycles_per_sec = pwm_nrfx_get_cycles_per_sec,
|
||||
};
|
||||
|
||||
static int pwm_nrfx_init(struct device *dev)
|
||||
{
|
||||
const struct pwm_nrfx_config *pconfig = dev->config->config_info;
|
||||
|
||||
nrfx_err_t result = nrfx_pwm_init(&pconfig->pwm, &pconfig->config,
|
||||
NULL);
|
||||
|
||||
if (result != NRFX_SUCCESS) {
|
||||
SYS_LOG_ERR("Failed to initialize device: %s",
|
||||
dev->config->name);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
nrfx_pwm_simple_playback(&pconfig->pwm,
|
||||
&pconfig->seq,
|
||||
1,
|
||||
NRFX_PWM_FLAG_LOOP);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
#define PWM_NRFX_OUTPUT_PIN(dev_idx, ch_idx) \
|
||||
(CONFIG_PWM_##dev_idx##_NRF_CH##ch_idx##_PIN | \
|
||||
(CONFIG_PWM_##dev_idx##_NRF_CH##ch_idx##_INVERTED ? \
|
||||
NRFX_PWM_PIN_INVERTED : 0))
|
||||
|
||||
#define PWM_NRFX_DEFAULT_VALUE(dev_idx, ch_idx) \
|
||||
(CONFIG_PWM_##dev_idx##_NRF_CH##ch_idx##_INVERTED ? \
|
||||
PWM_NRFX_CH_VALUE_INVERTED : PWM_NRFX_CH_VALUE_NORMAL)
|
||||
|
||||
#define PWM_NRFX_DEVICE(idx) \
|
||||
static struct pwm_nrfx_data pwm_nrfx_##idx##_data = { \
|
||||
.current = { \
|
||||
PWM_NRFX_DEFAULT_VALUE(idx, 0), \
|
||||
PWM_NRFX_DEFAULT_VALUE(idx, 1), \
|
||||
PWM_NRFX_DEFAULT_VALUE(idx, 2), \
|
||||
PWM_NRFX_DEFAULT_VALUE(idx, 3), \
|
||||
}, \
|
||||
.top_value = NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE \
|
||||
}; \
|
||||
static const struct pwm_nrfx_config pwm_nrfx_##idx##_config = { \
|
||||
.pwm = NRFX_PWM_INSTANCE(idx), \
|
||||
.config = { \
|
||||
.output_pins = { \
|
||||
PWM_NRFX_OUTPUT_PIN(idx, 0), \
|
||||
PWM_NRFX_OUTPUT_PIN(idx, 1), \
|
||||
PWM_NRFX_OUTPUT_PIN(idx, 2), \
|
||||
PWM_NRFX_OUTPUT_PIN(idx, 3), \
|
||||
}, \
|
||||
.base_clock = (nrf_pwm_clk_t) \
|
||||
CONFIG_PWM_##idx##_NRF_CLOCK_PRESCALER, \
|
||||
.count_mode = NRF_PWM_MODE_UP, \
|
||||
.top_value = NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE, \
|
||||
.load_mode = NRF_PWM_LOAD_INDIVIDUAL, \
|
||||
.step_mode = NRF_PWM_STEP_TRIGGERED, \
|
||||
}, \
|
||||
.seq.values.p_raw = pwm_nrfx_##idx##_data.current, \
|
||||
.seq.length = NRF_PWM_CHANNEL_COUNT \
|
||||
}; \
|
||||
\
|
||||
DEVICE_AND_API_INIT(pwm_nrfx_##idx, CONFIG_PWM_##idx##_NAME, \
|
||||
pwm_nrfx_init, &pwm_nrfx_##idx##_data, \
|
||||
&pwm_nrfx_##idx##_config, \
|
||||
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, \
|
||||
&pwm_nrfx_drv_api_funcs)
|
||||
|
||||
#ifdef CONFIG_PWM_0
|
||||
#ifndef CONFIG_PWM_0_NRF_CH0_INVERTED
|
||||
#define CONFIG_PWM_0_NRF_CH0_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_0_NRF_CH1_INVERTED
|
||||
#define CONFIG_PWM_0_NRF_CH1_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_0_NRF_CH2_INVERTED
|
||||
#define CONFIG_PWM_0_NRF_CH2_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_0_NRF_CH3_INVERTED
|
||||
#define CONFIG_PWM_0_NRF_CH3_INVERTED 0
|
||||
#endif
|
||||
PWM_NRFX_DEVICE(0);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PWM_1
|
||||
#ifndef CONFIG_PWM_1_NRF_CH0_INVERTED
|
||||
#define CONFIG_PWM_1_NRF_CH0_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_1_NRF_CH1_INVERTED
|
||||
#define CONFIG_PWM_1_NRF_CH1_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_1_NRF_CH2_INVERTED
|
||||
#define CONFIG_PWM_1_NRF_CH2_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_1_NRF_CH3_INVERTED
|
||||
#define CONFIG_PWM_1_NRF_CH3_INVERTED 0
|
||||
#endif
|
||||
PWM_NRFX_DEVICE(1);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PWM_2
|
||||
#ifndef CONFIG_PWM_2_NRF_CH0_INVERTED
|
||||
#define CONFIG_PWM_2_NRF_CH0_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_2_NRF_CH1_INVERTED
|
||||
#define CONFIG_PWM_2_NRF_CH1_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_2_NRF_CH2_INVERTED
|
||||
#define CONFIG_PWM_2_NRF_CH2_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_2_NRF_CH3_INVERTED
|
||||
#define CONFIG_PWM_2_NRF_CH3_INVERTED 0
|
||||
#endif
|
||||
PWM_NRFX_DEVICE(2);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PWM_3
|
||||
#ifndef CONFIG_PWM_3_NRF_CH0_INVERTED
|
||||
#define CONFIG_PWM_3_NRF_CH0_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_3_NRF_CH1_INVERTED
|
||||
#define CONFIG_PWM_3_NRF_CH1_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_3_NRF_CH2_INVERTED
|
||||
#define CONFIG_PWM_3_NRF_CH2_INVERTED 0
|
||||
#endif
|
||||
#ifndef CONFIG_PWM_3_NRF_CH3_INVERTED
|
||||
#define CONFIG_PWM_3_NRF_CH3_INVERTED 0
|
||||
#endif
|
||||
PWM_NRFX_DEVICE(3);
|
||||
#endif
|
||||
|
|
@ -10,6 +10,9 @@ config HAS_NORDIC_DRIVERS
|
|||
config HAS_NRFX
|
||||
bool
|
||||
|
||||
config NRFX_PWM
|
||||
bool
|
||||
|
||||
config NRFX_SPI
|
||||
bool
|
||||
|
||||
|
|
|
|||
|
|
@ -956,28 +956,28 @@
|
|||
|
||||
// <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver
|
||||
//==========================================================
|
||||
#ifndef NRFX_PWM_ENABLED
|
||||
#define NRFX_PWM_ENABLED 0
|
||||
#ifdef CONFIG_NRFX_PWM
|
||||
#define NRFX_PWM_ENABLED 1
|
||||
#endif
|
||||
// <q> NRFX_PWM0_ENABLED - Enable PWM0 instance
|
||||
|
||||
|
||||
#ifndef NRFX_PWM0_ENABLED
|
||||
#define NRFX_PWM0_ENABLED 0
|
||||
#ifdef CONFIG_PWM_0
|
||||
#define NRFX_PWM0_ENABLED 1
|
||||
#endif
|
||||
|
||||
// <q> NRFX_PWM1_ENABLED - Enable PWM1 instance
|
||||
|
||||
|
||||
#ifndef NRFX_PWM1_ENABLED
|
||||
#define NRFX_PWM1_ENABLED 0
|
||||
#ifdef CONFIG_PWM_1
|
||||
#define NRFX_PWM1_ENABLED 1
|
||||
#endif
|
||||
|
||||
// <q> NRFX_PWM2_ENABLED - Enable PWM2 instance
|
||||
|
||||
|
||||
#ifndef NRFX_PWM2_ENABLED
|
||||
#define NRFX_PWM2_ENABLED 0
|
||||
#ifdef CONFIG_PWM_2
|
||||
#define NRFX_PWM2_ENABLED 1
|
||||
#endif
|
||||
|
||||
// <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31>
|
||||
|
|
|
|||
|
|
@ -956,35 +956,35 @@
|
|||
|
||||
// <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver
|
||||
//==========================================================
|
||||
#ifndef NRFX_PWM_ENABLED
|
||||
#define NRFX_PWM_ENABLED 0
|
||||
#ifndef CONFIG_NRFX_PWM
|
||||
#define NRFX_PWM_ENABLED 1
|
||||
#endif
|
||||
// <q> NRFX_PWM0_ENABLED - Enable PWM0 instance
|
||||
|
||||
|
||||
#ifndef NRFX_PWM0_ENABLED
|
||||
#define NRFX_PWM0_ENABLED 0
|
||||
#ifndef CONFIG_PWM_0
|
||||
#define NRFX_PWM0_ENABLED 1
|
||||
#endif
|
||||
|
||||
// <q> NRFX_PWM1_ENABLED - Enable PWM1 instance
|
||||
|
||||
|
||||
#ifndef NRFX_PWM1_ENABLED
|
||||
#define NRFX_PWM1_ENABLED 0
|
||||
#ifndef CONFIG_PWM_1
|
||||
#define NRFX_PWM1_ENABLED 1
|
||||
#endif
|
||||
|
||||
// <q> NRFX_PWM2_ENABLED - Enable PWM2 instance
|
||||
|
||||
|
||||
#ifndef NRFX_PWM2_ENABLED
|
||||
#define NRFX_PWM2_ENABLED 0
|
||||
#ifndef CONFIG_PWM_2
|
||||
#define NRFX_PWM2_ENABLED 1
|
||||
#endif
|
||||
|
||||
// <q> NRFX_PWM3_ENABLED - Enable PWM3 instance
|
||||
|
||||
|
||||
#ifndef NRFX_PWM3_ENABLED
|
||||
#define NRFX_PWM3_ENABLED 0
|
||||
#ifndef CONFIG_PWM_3
|
||||
#define NRFX_PWM3_ENABLED 1
|
||||
#endif
|
||||
|
||||
// <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31>
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue