michaelh/zephyr
1
0
Fork 0
Code Releases Activity

sensor: ccs811: Convert to new DT_<COMPAT>_<INSTANCE> defines

Browse source 
Convert ccs811 sensor driver to use new defines so we can remove the
dts_fixup.h code for it.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is contained in:
Kumar Gala 2019-01-29 13:51:50 -06:00 • committed by Kumar Gala
commit cdc1b1f103
6 changed files with 17 additions and 29 deletions
Download patch file Download diff file Expand all files Collapse all files

22
drivers/sensor/ccs811/ccs811.c
View file

@ -28,7 +28,7 @@ static int ccs811_sample_fetch(struct device *dev, enum sensor_channel chan)
/* Check data ready flag for the measurement interval of 1 seconds */
while (tries-- > 0) {
if (i2c_reg_read_byte(drv_data->i2c, DT_CCS811_I2C_ADDR,
if (i2c_reg_read_byte(drv_data->i2c, DT_AMS_CCS811_0_BASE_ADDRESS,
CCS811_REG_STATUS, &status) < 0) {
LOG_ERR("Failed to read Status register");
return -EIO;
@ -46,7 +46,7 @@ static int ccs811_sample_fetch(struct device *dev, enum sensor_channel chan)
return -EIO;
}
if (i2c_burst_read(drv_data->i2c, DT_CCS811_I2C_ADDR,
if (i2c_burst_read(drv_data->i2c, DT_AMS_CCS811_0_BASE_ADDRESS,
CCS811_REG_ALG_RESULT_DATA, (u8_t *)buf, 8) < 0) {
LOG_ERR("Failed to read conversion data.");
return -EIO;
@ -117,7 +117,7 @@ static int switch_to_app_mode(struct device *i2c)
LOG_DBG("Switching to Application mode...");
if (i2c_reg_read_byte(i2c, DT_CCS811_I2C_ADDR,
if (i2c_reg_read_byte(i2c, DT_AMS_CCS811_0_BASE_ADDRESS,
CCS811_REG_STATUS, &status) < 0) {
LOG_ERR("Failed to read Status register");
return -EIO;
@ -131,12 +131,12 @@ static int switch_to_app_mode(struct device *i2c)
buf = CCS811_REG_APP_START;
/* Set the device to application mode */
if (i2c_write(i2c, &buf, 1, DT_CCS811_I2C_ADDR) < 0) {
if (i2c_write(i2c, &buf, 1, DT_AMS_CCS811_0_BASE_ADDRESS) < 0) {
LOG_ERR("Failed to set Application mode");
return -EIO;
}
if (i2c_reg_read_byte(i2c, DT_CCS811_I2C_ADDR,
if (i2c_reg_read_byte(i2c, DT_AMS_CCS811_0_BASE_ADDRESS,
CCS811_REG_STATUS, &status) < 0) {
LOG_ERR("Failed to read Status register");
return -EIO;
@ -159,10 +159,10 @@ int ccs811_init(struct device *dev)
int ret;
u8_t hw_id, status;
drv_data->i2c = device_get_binding(DT_CCS811_I2C_MASTER_DEV_NAME);
drv_data->i2c = device_get_binding(DT_AMS_CCS811_0_BUS_NAME);
if (drv_data->i2c == NULL) {
LOG_ERR("Failed to get pointer to %s device!",
DT_CCS811_I2C_MASTER_DEV_NAME);
DT_AMS_CCS811_0_BUS_NAME);
return -EINVAL;
}
@ -202,7 +202,7 @@ int ccs811_init(struct device *dev)
}
/* Check Hardware ID */
if (i2c_reg_read_byte(drv_data->i2c, DT_CCS811_I2C_ADDR,
if (i2c_reg_read_byte(drv_data->i2c, DT_AMS_CCS811_0_BASE_ADDRESS,
CCS811_REG_HW_ID, &hw_id) < 0) {
LOG_ERR("Failed to read Hardware ID register");
return -EIO;
@ -214,7 +214,7 @@ int ccs811_init(struct device *dev)
}
/* Set Measurement mode for 1 second */
if (i2c_reg_write_byte(drv_data->i2c, DT_CCS811_I2C_ADDR,
if (i2c_reg_write_byte(drv_data->i2c, DT_AMS_CCS811_0_BASE_ADDRESS,
CCS811_REG_MEAS_MODE,
CCS811_MODE_IAQ_1SEC) < 0) {
LOG_ERR("Failed to set Measurement mode");
@ -222,7 +222,7 @@ int ccs811_init(struct device *dev)
}
/* Check for error */
if (i2c_reg_read_byte(drv_data->i2c, DT_CCS811_I2C_ADDR,
if (i2c_reg_read_byte(drv_data->i2c, DT_AMS_CCS811_0_BASE_ADDRESS,
CCS811_REG_STATUS, &status) < 0) {
LOG_ERR("Failed to read Status register");
return -EIO;
@ -238,6 +238,6 @@ int ccs811_init(struct device *dev)
static struct ccs811_data ccs811_driver;
DEVICE_AND_API_INIT(ccs811, DT_CCS811_NAME, ccs811_init, &ccs811_driver,
DEVICE_AND_API_INIT(ccs811, DT_AMS_CCS811_0_LABEL, ccs811_init, &ccs811_driver,
NULL, POST_KERNEL, CONFIG_SENSOR_INIT_PRIORITY,
&ccs811_driver_api);