drivers: ptp_clock: ptp_enet: use MMIO mapped address

Get MMIO mapped address from ENET module driver.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
This commit is contained in:
Jiafei Pan 2024-04-25 15:15:02 +08:00 committed by Alberto Escolar
commit c8d8dce755

View file

@ -1,5 +1,5 @@
/*
* Copyright 2023 NXP
* Copyright 2023-2024 NXP
*
* Based on a commit to drivers/ethernet/eth_mcux.c which was:
* Copyright (c) 2018 Intel Coporation
@ -19,8 +19,8 @@
#include <fsl_enet.h>
struct ptp_clock_nxp_enet_config {
ENET_Type *base;
const struct pinctrl_dev_config *pincfg;
const struct device *module_dev;
const struct device *port;
const struct device *clock_dev;
struct device *clock_subsys;
@ -28,6 +28,7 @@ struct ptp_clock_nxp_enet_config {
};
struct ptp_clock_nxp_enet_data {
ENET_Type *base;
double clock_ratio;
enet_handle_t enet_handle;
struct k_mutex ptp_mutex;
@ -36,14 +37,13 @@ struct ptp_clock_nxp_enet_data {
static int ptp_clock_nxp_enet_set(const struct device *dev,
struct net_ptp_time *tm)
{
const struct ptp_clock_nxp_enet_config *config = dev->config;
struct ptp_clock_nxp_enet_data *data = dev->data;
enet_ptp_time_t enet_time;
enet_time.second = tm->second;
enet_time.nanosecond = tm->nanosecond;
ENET_Ptp1588SetTimer(config->base, &data->enet_handle, &enet_time);
ENET_Ptp1588SetTimer(data->base, &data->enet_handle, &enet_time);
return 0;
}
@ -51,11 +51,10 @@ static int ptp_clock_nxp_enet_set(const struct device *dev,
static int ptp_clock_nxp_enet_get(const struct device *dev,
struct net_ptp_time *tm)
{
const struct ptp_clock_nxp_enet_config *config = dev->config;
struct ptp_clock_nxp_enet_data *data = dev->data;
enet_ptp_time_t enet_time;
ENET_Ptp1588GetTimer(config->base, &data->enet_handle, &enet_time);
ENET_Ptp1588GetTimer(data->base, &data->enet_handle, &enet_time);
tm->second = enet_time.second;
tm->nanosecond = enet_time.nanosecond;
@ -66,7 +65,7 @@ static int ptp_clock_nxp_enet_get(const struct device *dev,
static int ptp_clock_nxp_enet_adjust(const struct device *dev,
int increment)
{
const struct ptp_clock_nxp_enet_config *config = dev->config;
struct ptp_clock_nxp_enet_data *data = dev->data;
int ret = 0;
int key;
@ -75,13 +74,13 @@ static int ptp_clock_nxp_enet_adjust(const struct device *dev,
ret = -EINVAL;
} else {
key = irq_lock();
if (config->base->ATPER != NSEC_PER_SEC) {
if (data->base->ATPER != NSEC_PER_SEC) {
ret = -EBUSY;
} else {
/* Seconds counter is handled by software. Change the
* period of one software second to adjust the clock.
*/
config->base->ATPER = NSEC_PER_SEC - increment;
data->base->ATPER = NSEC_PER_SEC - increment;
ret = 0;
}
irq_unlock(key);
@ -144,7 +143,7 @@ static int ptp_clock_nxp_enet_rate_adjust(const struct device *dev,
k_mutex_lock(&data->ptp_mutex, K_FOREVER);
ENET_Ptp1588AdjustTimer(config->base, corr, mul);
ENET_Ptp1588AdjustTimer(data->base, corr, mul);
k_mutex_unlock(&data->ptp_mutex);
@ -167,17 +166,17 @@ void nxp_enet_ptp_clock_callback(const struct device *dev,
(void) clock_control_get_rate(config->clock_dev, config->clock_subsys,
&enet_ref_pll_rate);
ENET_AddMulticastGroup(config->base, ptp_multicast);
ENET_AddMulticastGroup(config->base, ptp_peer_multicast);
ENET_AddMulticastGroup(data->base, ptp_multicast);
ENET_AddMulticastGroup(data->base, ptp_peer_multicast);
/* only for ERRATA_2579 */
ptp_config.channel = kENET_PtpTimerChannel3;
ptp_config.ptp1588ClockSrc_Hz = enet_ref_pll_rate;
data->clock_ratio = 1.0;
ENET_Ptp1588SetChannelMode(config->base, kENET_PtpTimerChannel3,
ENET_Ptp1588SetChannelMode(data->base, kENET_PtpTimerChannel3,
kENET_PtpChannelPulseHighonCompare, true);
ENET_Ptp1588Configure(config->base, &data->enet_handle,
ENET_Ptp1588Configure(data->base, &data->enet_handle,
&ptp_config);
}
@ -193,6 +192,8 @@ static int ptp_clock_nxp_enet_init(const struct device *port)
struct ptp_clock_nxp_enet_data *data = port->data;
int ret;
data->base = (ENET_Type *)DEVICE_MMIO_GET(config->module_dev);
ret = pinctrl_apply_state(config->pincfg, PINCTRL_STATE_DEFAULT);
if (ret) {
return ret;
@ -207,7 +208,6 @@ static int ptp_clock_nxp_enet_init(const struct device *port)
static void ptp_clock_nxp_enet_isr(const struct device *dev)
{
const struct ptp_clock_nxp_enet_config *config = dev->config;
struct ptp_clock_nxp_enet_data *data = dev->data;
enet_ptp_timer_channel_t channel;
@ -215,12 +215,12 @@ static void ptp_clock_nxp_enet_isr(const struct device *dev)
/* clear channel */
for (channel = kENET_PtpTimerChannel1; channel <= kENET_PtpTimerChannel4; channel++) {
if (ENET_Ptp1588GetChannelStatus(config->base, channel)) {
ENET_Ptp1588ClearChannelStatus(config->base, channel);
if (ENET_Ptp1588GetChannelStatus(data->base, channel)) {
ENET_Ptp1588ClearChannelStatus(data->base, channel);
}
}
ENET_TimeStampIRQHandler(config->base, &data->enet_handle);
ENET_TimeStampIRQHandler(data->base, &data->enet_handle);
irq_unlock(irq_lock_key);
}
@ -247,7 +247,6 @@ static const struct ptp_clock_driver_api ptp_clock_nxp_enet_api = {
\
static const struct ptp_clock_nxp_enet_config \
ptp_clock_nxp_enet_##n##_config = { \
.base = (ENET_Type *) DT_REG_ADDR(DT_INST_PARENT(n)), \
.pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n), \
.port = DEVICE_DT_INST_GET(n), \
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(n)), \