michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: Move led and button definitions to dts for kinetis boards

Browse source 
Adds led and button dts nodes to all kinetis boards and removes the
now unused preprocessor macros from board.h.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit is contained in:
Maureen Helm 2018-04-19 12:57:18 -05:00 • committed by Kumar Gala
commit c627de1f87
10 changed files with 153 additions and 146 deletions
Download patch file Download diff file Expand all files Collapse all files

38
boards/arm/frdm_k64f/board.h
View file

@ -9,42 +9,4 @@
#include <soc.h> #include <soc.h>
/* Push button switch 2 */
#define SW2_GPIO_NAME CONFIG_GPIO_MCUX_PORTC_NAME
#define SW2_GPIO_PIN 6
/* Push button switch 3 */
#define SW3_GPIO_NAME CONFIG_GPIO_MCUX_PORTA_NAME
#define SW3_GPIO_PIN 4
/* Red LED */
#define RED_GPIO_NAME CONFIG_GPIO_MCUX_PORTB_NAME
#define RED_GPIO_PIN 22
/* Green LED */
#define GREEN_GPIO_NAME CONFIG_GPIO_MCUX_PORTE_NAME
#define GREEN_GPIO_PIN 26
/* Blue LED */
#define BLUE_GPIO_NAME CONFIG_GPIO_MCUX_PORTB_NAME
#define BLUE_GPIO_PIN 21
/* LED0. There is no physical LED on the board with this name, so create an
* alias to the green LED to make various samples work.
*/
#define LED0_GPIO_PORT GREEN_GPIO_NAME
#define LED0_GPIO_PIN GREEN_GPIO_PIN
/* LED1. There is no physical LED on the board with this name, so create an
* alias to the blue LED to make various samples work.
*/
#define LED1_GPIO_PORT BLUE_GPIO_NAME
#define LED1_GPIO_PIN BLUE_GPIO_PIN
/* Push button switch 0. There is no physical switch on the board with this
* name, so create an alias to SW3 to make the basic button sample work.
*/
#define SW0_GPIO_NAME SW3_GPIO_NAME
#define SW0_GPIO_PIN SW3_GPIO_PIN
#endif /* __INC_BOARD_H */ #endif /* __INC_BOARD_H */

35
boards/arm/frdm_k64f/frdm_k64f.dts
View file

@ -28,6 +28,11 @@
i2c-0 = &i2c0; i2c-0 = &i2c0;
i2c-1 = &i2c1; i2c-1 = &i2c1;
i2c-2 = &i2c2; i2c-2 = &i2c2;
led0 = &green_led;
led1 = &blue_led;
led2 = &red_led;
sw0 = &user_button_3;
sw1 = &user_button_2;
}; };
chosen { chosen {
@ -39,6 +44,36 @@
#endif #endif
zephyr,uart-pipe = &uart0; zephyr,uart-pipe = &uart0;
}; };
leds {
compatible = "gpio-leds";
red_led: led@0 {
gpios = <&gpiob 22 GPIO_INT_ACTIVE_LOW>;
label = "User LD1";
};
green_led: led@1 {
gpios = <&gpioe 26 GPIO_INT_ACTIVE_LOW>;
label = "User LD2";
};
blue_led: led@2 {
gpios = <&gpiob 21 GPIO_INT_ACTIVE_LOW>;
label = "User LD3";
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
user_button_2: button@0 {
label = "User SW2";
gpios = <&gpioc 6 GPIO_INT_ACTIVE_LOW>;
};
user_button_3: button@1 {
label = "User SW3";
gpios = <&gpioa 4 GPIO_INT_ACTIVE_LOW>;
};
};
}; };
&adc0 { &adc0 {

38
boards/arm/frdm_kl25z/board.h
View file

@ -9,42 +9,4 @@
#include <soc.h> #include <soc.h>
/* Push button switch for test purposes */
#define SW0_TEST_GPIO_NAME CONFIG_GPIO_MCUX_PORTA_NAME
#define SW0_TEST_GPIO_PIN 16
/* Push button switch for test purposes */
#define SW1_TEST_GPIO_NAME CONFIG_GPIO_MCUX_PORTA_NAME
#define SW1_TEST_GPIO_PIN 17
/* Red LED */
#define RED_GPIO_NAME CONFIG_GPIO_MCUX_PORTB_NAME
#define RED_GPIO_PIN 18
/* Green LED */
#define GREEN_GPIO_NAME CONFIG_GPIO_MCUX_PORTB_NAME
#define GREEN_GPIO_PIN 19
/* Blue LED */
#define BLUE_GPIO_NAME CONFIG_GPIO_MCUX_PORTD_NAME
#define BLUE_GPIO_PIN 1
/* LED0. There is no physical LED on the board with this name, so create an
* alias to the green LED to make various samples work.
*/
#define LED0_GPIO_PORT GREEN_GPIO_NAME
#define LED0_GPIO_PIN GREEN_GPIO_PIN
/* LED1. There is no physical LED on the board with this name, so create an
* alias to the blue LED to make various samples work.
*/
#define LED1_GPIO_PORT BLUE_GPIO_NAME
#define LED1_GPIO_PIN BLUE_GPIO_PIN
/* Push button switch 0. There is no physical switch on the board,
* so an push button must be added to such pins for basic button sample work.
*/
#define SW0_GPIO_NAME SW0_TEST_GPIO_NAME
#define SW0_GPIO_PIN SW0_TEST_GPIO_PIN
#endif /* __INC_BOARD_H */ #endif /* __INC_BOARD_H */

40
boards/arm/frdm_kl25z/frdm_kl25z.dts
View file

@ -11,6 +11,16 @@
uart-0 = &uart0; uart-0 = &uart0;
i2c-0 = &i2c0; i2c-0 = &i2c0;
i2c-1 = &i2c1; i2c-1 = &i2c1;
gpio-a = &gpioa;
gpio-b = &gpiob;
gpio-c = &gpioc;
gpio-d = &gpiod;
gpio-e = &gpioe;
led0 = &green_led;
led1 = &blue_led;
led2 = &red_led;
sw0 = &user_button_0;
sw1 = &user_button_1;
}; };
chosen { chosen {
@ -18,6 +28,36 @@
zephyr,flash = &flash0; zephyr,flash = &flash0;
zephyr,console = &uart0; zephyr,console = &uart0;
}; };
leds {
compatible = "gpio-leds";
red_led: led@0 {
gpios = <&gpiob 18 GPIO_INT_ACTIVE_LOW>;
label = "User LD1";
};
green_led: led@1 {
gpios = <&gpiob 19 GPIO_INT_ACTIVE_LOW>;
label = "User LD2";
};
blue_led: led@2 {
gpios = <&gpiod 1 GPIO_INT_ACTIVE_LOW>;
label = "User LD3";
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
user_button_0: button@0 {
label = "User SW0";
gpios = <&gpioa 16 GPIO_INT_ACTIVE_LOW>;
};
user_button_1: button@1 {
label = "User SW1";
gpios = <&gpioa 17 GPIO_INT_ACTIVE_LOW>;
};
};
}; };
&adc0 { &adc0 {

38
boards/arm/frdm_kw41z/board.h
View file

@ -9,42 +9,4 @@
#include <soc.h> #include <soc.h>
/* Push button switch 3 */
#define SW3_GPIO_NAME CONFIG_GPIO_MCUX_PORTC_NAME
#define SW3_GPIO_PIN 4
/* Push button switch 4 */
#define SW4_GPIO_NAME CONFIG_GPIO_MCUX_PORTC_NAME
#define SW4_GPIO_PIN 5
/* Red LED */
#define RED_GPIO_NAME CONFIG_GPIO_MCUX_PORTC_NAME
#define RED_GPIO_PIN 1
/* Green LED */
#define GREEN_GPIO_NAME CONFIG_GPIO_MCUX_PORTA_NAME
#define GREEN_GPIO_PIN 19
/* Blue LED */
#define BLUE_GPIO_NAME CONFIG_GPIO_MCUX_PORTA_NAME
#define BLUE_GPIO_PIN 18
/* LED0. There is no physical LED on the board with this name, so create an
* alias to the green LED to make various samples work.
*/
#define LED0_GPIO_PORT GREEN_GPIO_NAME
#define LED0_GPIO_PIN GREEN_GPIO_PIN
/* LED1. There is no physical LED on the board with this name, so create an
* alias to the blue LED to make various samples work.
*/
#define LED1_GPIO_PORT BLUE_GPIO_NAME
#define LED1_GPIO_PIN BLUE_GPIO_PIN
/* Push button switch 0. There is no physical switch on the board with this
* name, so create an alias to SW3 to make the basic button sample work.
*/
#define SW0_GPIO_NAME SW3_GPIO_NAME
#define SW0_GPIO_PIN SW3_GPIO_PIN
#endif /* __INC_BOARD_H */ #endif /* __INC_BOARD_H */

35
boards/arm/frdm_kw41z/frdm_kw41z.dts
View file

@ -17,6 +17,11 @@
gpio-c = &gpioc; gpio-c = &gpioc;
i2c-0 = &i2c0; i2c-0 = &i2c0;
i2c-1 = &i2c1; i2c-1 = &i2c1;
led0 = &green_led;
led1 = &blue_led;
led2 = &red_led;
sw0 = &user_button_3;
sw1 = &user_button_4;
}; };
chosen { chosen {
@ -24,6 +29,36 @@
zephyr,flash = &flash0; zephyr,flash = &flash0;
zephyr,console = &lpuart0; zephyr,console = &lpuart0;
}; };
leds {
compatible = "gpio-leds";
red_led: led@0 {
gpios = <&gpioc 1 GPIO_INT_ACTIVE_LOW>;
label = "User LD1";
};
green_led: led@1 {
gpios = <&gpioa 19 GPIO_INT_ACTIVE_LOW>;
label = "User LD2";
};
blue_led: led@2 {
gpios = <&gpioa 18 GPIO_INT_ACTIVE_LOW>;
label = "User LD3";
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
user_button_3: button@0 {
label = "User SW3";
gpios = <&gpioc 4 GPIO_INT_ACTIVE_LOW>;
};
user_button_4: button@1 {
label = "User SW4";
gpios = <&gpioc 5 GPIO_INT_ACTIVE_LOW>;
};
};
}; };
&adc0 { &adc0 {

20
boards/arm/hexiwear_k64/board.h
View file

@ -20,26 +20,6 @@
#define BLUE_PWM_NAME CONFIG_FTM_3_NAME #define BLUE_PWM_NAME CONFIG_FTM_3_NAME
#define BLUE_PWM_CHANNEL 5 #define BLUE_PWM_CHANNEL 5
#else
/* Red LED */
#define RED_GPIO_NAME CONFIG_GPIO_MCUX_PORTC_NAME
#define RED_GPIO_PIN 8
/* Green LED */
#define GREEN_GPIO_NAME CONFIG_GPIO_MCUX_PORTD_NAME
#define GREEN_GPIO_PIN 0
/* Blue LED */
#define BLUE_GPIO_NAME CONFIG_GPIO_MCUX_PORTC_NAME
#define BLUE_GPIO_PIN 9
/* LED0. There is no physical LED on the board with this name, so create an
* alias to the green LED to make the basic blinky sample work.
*/
#define LED0_GPIO_PORT GREEN_GPIO_NAME
#define LED0_GPIO_PIN GREEN_GPIO_PIN
#endif /* CONFIG_PWM_3 */ #endif /* CONFIG_PWM_3 */
#endif /* __INC_BOARD_H */ #endif /* __INC_BOARD_H */

18
boards/arm/hexiwear_k64/hexiwear_k64.dts
View file

@ -28,6 +28,9 @@
i2c-0 = &i2c0; i2c-0 = &i2c0;
i2c-1 = &i2c1; i2c-1 = &i2c1;
i2c-2 = &i2c2; i2c-2 = &i2c2;
led0 = &green_led;
led1 = &blue_led;
led2 = &red_led;
}; };
chosen { chosen {
@ -39,6 +42,21 @@
#endif #endif
}; };
leds {
compatible = "gpio-leds";
red_led: led@0 {
gpios = <&gpioc 8 GPIO_INT_ACTIVE_LOW>;
label = "User LD1";
};
green_led: led@1 {
gpios = <&gpiod 0 GPIO_INT_ACTIVE_LOW>;
label = "User LD2";
};
blue_led: led@2 {
gpios = <&gpioc 9 GPIO_INT_ACTIVE_LOW>;
label = "User LD3";
};
};
}; };
&adc0 { &adc0 {

12
boards/arm/usb_kw24d512/board.h
View file

@ -9,16 +9,4 @@
#include <soc.h> #include <soc.h>
/* Push button switch (SW1) */
#define SW0_GPIO_NAME CONFIG_GPIO_MCUX_PORTC_NAME
#define SW0_GPIO_PIN 4
/* LED0 (D2) */
#define LED0_GPIO_PORT CONFIG_GPIO_MCUX_PORTD_NAME
#define LED0_GPIO_PIN 4
/* LED1 (D3) */
#define LED1_GPIO_PORT CONFIG_GPIO_MCUX_PORTD_NAME
#define LED1_GPIO_PIN 5
#endif /* __INC_BOARD_H */ #endif /* __INC_BOARD_H */

25
boards/arm/usb_kw24d512/usb_kw24d512.dts
View file

@ -19,6 +19,9 @@
gpio-d = &gpiod; gpio-d = &gpiod;
gpio-e = &gpioe; gpio-e = &gpioe;
i2c-0 = &i2c0; i2c-0 = &i2c0;
led0 = &led_0;
led1 = &led_1;
sw0 = &user_button_1;
}; };
chosen { chosen {
@ -27,6 +30,28 @@
zephyr,console = &uart0; zephyr,console = &uart0;
zephyr,uart-pipe = &uart0; zephyr,uart-pipe = &uart0;
}; };
leds {
compatible = "gpio-leds";
led_0: led@0 {
gpios = <&gpiod 4 GPIO_INT_ACTIVE_LOW>;
label = "User LD1";
};
led_1: led@1 {
gpios = <&gpiod 5 GPIO_INT_ACTIVE_LOW>;
label = "User LD2";
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
user_button_1: button@0 {
label = "User SW1";
gpios = <&gpioc 4 GPIO_INT_ACTIVE_LOW>;
};
};
}; };
&adc0 { &adc0 {