michaelh/zephyr
1
0
Fork 0
Code Releases Activity

Bluetooth: Kconfig: Restructure for a more logical hierarchy

Browse source 
Restructure the Bluetooth options more logically.

- Both host and controller are now behind the same high level
  CONFIG_BLUETOOTH.

- Selecting controller support disables other HCI driver selection, so
  the controller isn't in the same list as HCI drivers any more.

- Under the top-level there's a "Custom stack" option, which when
  enabled opens up the option of choosing CONFIG_NBLE.

There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.

Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit is contained in:
Johan Hedberg 2016-11-09 12:23:21 +02:00
commit c583a9f43b
71 changed files with 95 additions and 148 deletions
Download patch file Download diff file Expand all files Collapse all files

6
drivers/bluetooth/Kconfig
View file

@ -24,9 +24,13 @@ if BLUETOOTH
menu "Bluetooth Drivers"
if BLUETOOTH_HCI
source "drivers/bluetooth/hci/Kconfig"
endif
if BLUETOOTH_CUSTOM
source "drivers/bluetooth/nble/Kconfig"
endif
config BLUETOOTH_NRF51_PM
bool "nRF51 Power Management [EXPERIMENTAL]"
@ -37,7 +41,7 @@ config BLUETOOTH_NRF51_PM
config BLUETOOTH_WAIT_NOP
bool "Wait for \"NOP\" Command Complete event during init"
depends on BLUETOOTH_STACK_HCI || BLUETOOTH_STACK_HCI_RAW
depends on BLUETOOTH_HCI
help
Some controllers emit a Command Complete event for the NOP
opcode to indicate that they're ready to receive commands.

18
drivers/bluetooth/hci/Kconfig
View file

@ -16,10 +16,12 @@
# limitations under the License.
#
if BLUETOOTH_STACK_HCI || BLUETOOTH_STACK_HCI_RAW
comment "Bluetooth HCI Driver Options"
# Controller support is an HCI driver in itself, so these HCI driver
# options are only applicable if controller support hasn't been enabled.
if !BLUETOOTH_CONTROLLER
config BLUETOOTH_UART
bool
default n
@ -48,12 +50,6 @@ config BLUETOOTH_H5
Bluetooth three-wire (H:5) UART driver. Implementation of HCI
Three-Wire UART Transport Layer.
config BLUETOOTH_CONTROLLER
bool "Controller"
select BLUETOOTH_HOST_BUFFERS
help
Enables support for SoC native controller implementation.
config BLUETOOTH_NO_DRIVER
bool "No default HCI driver"
help
@ -62,6 +58,8 @@ config BLUETOOTH_NO_DRIVER
endchoice
endif # !BLUETOOTH_CONTROLLER
config BLUETOOTH_HOST_BUFFERS
bool "Host managed incoming data buffers"
default n
@ -76,7 +74,7 @@ config BLUETOOTH_HOST_BUFFERS
config BLUETOOTH_DEBUG_HCI_DRIVER
bool "Bluetooth HCI driver debug"
depends on BLUETOOTH_DEBUG && (BLUETOOTH_UART || BLUETOOTH_CONTROLLER)
depends on BLUETOOTH_DEBUG
default n
help
This option enables debug support for the chosen
@ -110,5 +108,3 @@ config BLUETOOTH_HCI_RECV_RESERVE
default 0
default 0 if BLUETOOTH_H4
default 0 if BLUETOOTH_H5
endif # BLUETOOTH_STACK_HCI || BLUETOOTH_STACK_HCI_RAW

17
drivers/bluetooth/nble/Kconfig
View file

@ -17,18 +17,11 @@
#
config NBLE
bool "Support for custom Nordic Semiconductor BLE protocol"
default y if BLUETOOTH_STACK_NBLE
default n
select BLUETOOTH_PERIPHERAL
select BLUETOOTH_CENTRAL
select BLUETOOTH_GATT_CLIENT
select BLUETOOTH_SMP
bool "Support for custom non-HCI nRF51 firmware"
select UART_INTERRUPT_DRIVEN
select NANO_TIMEOUTS
select NET_BUF
depends on SERIAL
depends on BLUETOOTH_STACK_NBLE
help
Enables support for using Nordic Semiconductor nRF51 Bluetooth
LE chips with a custom firmware. The API for this is a subset of
@ -43,11 +36,11 @@ config NBLE
if NBLE
config BLUETOOTH_PERIPHERAL
bool
default n
default y
config BLUETOOTH_CENTRAL
bool
default n
default y
config BLUETOOTH_ATT_PREPARE_COUNT
int "Number of ATT prepare write buffers"
@ -59,11 +52,11 @@ config BLUETOOTH_ATT_PREPARE_COUNT
config BLUETOOTH_GATT_CLIENT
bool
default n
default y
config BLUETOOTH_SMP
bool
default n
default y
config BLUETOOTH_MAX_CONN
int

1
samples/bluetooth/beacon/prj.conf
View file

@ -1,3 +1,2 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y

2
samples/bluetooth/beacon/prj_nble.conf
View file

@ -1,4 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_NBLE=y
CONFIG_BLUETOOTH_CUSTOM=y
CONFIG_NBLE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y

1
samples/bluetooth/central/prj.conf
View file

@ -1,3 +1,2 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_CENTRAL=y

1
samples/bluetooth/central_hr/prj.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
samples/bluetooth/eddystone/prj.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_GATT_DYNAMIC_DB=y

2
samples/bluetooth/eddystone/prj_nble.conf
View file

@ -1,4 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_NBLE=y
CONFIG_BLUETOOTH_CUSTOM=y
CONFIG_NBLE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y

2
samples/bluetooth/hci_uart/generic.conf
View file

@ -4,4 +4,4 @@ CONFIG_UART_CONSOLE=n
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_HCI_RAW=y
CONFIG_BLUETOOTH_HCI_RAW=y

2
samples/bluetooth/hci_uart/nrf5.conf
View file

@ -5,7 +5,7 @@ CONFIG_GPIO=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_HCI_RAW=y
CONFIG_BLUETOOTH_HCI_RAW=y
CONFIG_BLUETOOTH_MAX_CONN=16
CONFIG_BLUETOOTH_CONTROLLER_RX_BUFFERS=4
CONFIG_BLUETOOTH_CONTROLLER_TX_BUFFERS=4

2
samples/bluetooth/hci_usb/prj.conf
View file

@ -6,4 +6,4 @@ CONFIG_USB_DEVICE_STACK=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_HCI_RAW=y
CONFIG_BLUETOOTH_HCI_RAW=y

1
samples/bluetooth/peripheral/prj.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_SMP=y
CONFIG_BLUETOOTH_SIGNING=y

2
samples/bluetooth/peripheral/prj_nble.conf
View file

@ -1,5 +1,5 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_NBLE=y
CONFIG_BLUETOOTH_CUSTOM=y
CONFIG_NBLE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_ATT_PREPARE_COUNT=2

2
samples/bluetooth/peripheral_csc/prj_nble.conf
View file

@ -1,6 +1,6 @@
CONFIG_MINIMAL_LIBC_EXTENDED=y
CONFIG_TEST_RANDOM_GENERATOR=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_NBLE=y
CONFIG_BLUETOOTH_CUSTOM=y
CONFIG_NBLE=y
CONFIG_BLUETOOTH_DEBUG_STDOUT=y

1
samples/bluetooth/peripheral_dis/prj.conf
View file

@ -1,4 +1,3 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_GATT_DYNAMIC_DB=y

1
samples/bluetooth/peripheral_esp/prj.conf
View file

@ -1,6 +1,5 @@
CONFIG_TEST_RANDOM_GENERATOR=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_GATT_DYNAMIC_DB=y
CONFIG_BLUETOOTH_SMP=y

2
samples/bluetooth/peripheral_esp/prj_nble.conf
View file

@ -1,4 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_NBLE=y
CONFIG_BLUETOOTH_CUSTOM=y
CONFIG_NBLE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y

1
samples/bluetooth/peripheral_hids/prj.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_SMP=y
CONFIG_BLUETOOTH_PERIPHERAL=y

2
samples/bluetooth/peripheral_hids/prj_nble.conf
View file

@ -1,4 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_NBLE=y
CONFIG_BLUETOOTH_CUSTOM=y
CONFIG_NBLE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y

1
samples/bluetooth/peripheral_hr/prj.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_SMP=y
CONFIG_BLUETOOTH_PERIPHERAL=y

2
samples/bluetooth/peripheral_hr/prj_nble.conf
View file

@ -1,4 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_NBLE=y
CONFIG_BLUETOOTH_CUSTOM=y
CONFIG_NBLE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y

1
samples/bluetooth/peripheral_sc_only/prj.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_SMP=y
CONFIG_BLUETOOTH_SMP_SC_ONLY=y

2
samples/environmental_sensing/x86/prj_nble.conf
View file

@ -7,5 +7,5 @@ CONFIG_IPM_CONSOLE_SENDER=y
CONFIG_NANO_TIMEOUTS=y
CONFIG_TIMESLICE_SIZE=1
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_NBLE=y
CONFIG_BLUETOOTH_CUSTOM=y
CONFIG_NBLE=y

1
samples/environmental_sensing/x86/prj_nimble.conf
View file

@ -7,7 +7,6 @@ CONFIG_IPM_CONSOLE_SENDER=y
CONFIG_NANO_TIMEOUTS=y
CONFIG_TIMESLICE_SIZE=1
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_GATT_DYNAMIC_DB=y
CONFIG_GPIO=y

1
samples/net/echo_client/prj_bt.conf
View file

@ -1,6 +1,5 @@
CONFIG_TEST_RANDOM_GENERATOR=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_SMP=y
CONFIG_BLUETOOTH_SIGNING=y

1
samples/net/echo_server/prj_bt.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_DEBUG_L2CAP=y
CONFIG_BLUETOOTH_SMP=y

1
samples/net/trickle-legacy/prj_bt.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_DEBUG_L2CAP=y
CONFIG_BLUETOOTH_SMP=y

43
subsys/bluetooth/Kconfig
View file

@ -15,6 +15,49 @@
# limitations under the License.
#
menuconfig BLUETOOTH
bool "Bluetooth support"
default n
select NANO_TIMEOUTS
select NET_BUF
help
This option enables Bluetooth support.
if BLUETOOTH
choice
prompt "Bluetooth Stack Selection"
default BLUETOOTH_HCI
help
Select the Bluetooth stack to compile.
config BLUETOOTH_HCI
bool "HCI-based"
help
HCI-based stack with optional host & controller parts and an
HCI driver in between.
config BLUETOOTH_CUSTOM
bool "Custom"
help
Select a custom, non-HCI based stack. If you're not sure what
this is, you probably want the HCI-based stack instead.
endchoice
if BLUETOOTH_HCI
config BLUETOOTH_CONTROLLER
bool "Bluetooth Controller"
select BLUETOOTH_HOST_BUFFERS
help
Enables support for SoC native controller implementation.
source "subsys/bluetooth/host/Kconfig"
if BLUETOOTH_CONTROLLER
source "subsys/bluetooth/controller/Kconfig"
endif
endif # BLUETOOTH_HCI
endif # BLUETOOTH

2
subsys/bluetooth/Makefile
View file

@ -1,2 +1,2 @@
obj-$(CONFIG_BLUETOOTH) += host/
obj-$(CONFIG_BLUETOOTH_HCI) += host/
obj-$(CONFIG_BLUETOOTH_CONTROLLER) += controller/

2
subsys/bluetooth/controller/Kconfig
View file

@ -38,7 +38,7 @@ config BLUETOOTH_CONTROLLER_RX_STACK_SIZE
config BLUETOOTH_CONTROLLER_ASSERT_HANDLER
bool "Bluetooth Controller Assertion Handler"
depends on BLUETOOTH_STACK_HCI_RAW
depends on BLUETOOTH_HCI_RAW
help
This option enables an application-defined sink for the
controller assertion mechanism. This must be defined in

72
subsys/bluetooth/host/Kconfig
View file

@ -16,59 +16,24 @@
# limitations under the License.
#
menuconfig BLUETOOTH
bool "Bluetooth support"
default n
select NANO_TIMEOUTS
select NET_BUF
help
This option enables Bluetooth support.
comment "Host Stack Configuration"
if BLUETOOTH
choice
prompt "Bluetooth Stack Selection"
default BLUETOOTH_STACK_HCI
help
Select the Bluetooth stack to compile.
config BLUETOOTH_STACK_HCI
bool "HCI Stack"
help
Select the Bluetooth stack to use with HCI drivers.
config BLUETOOTH_STACK_NBLE
bool "Nordic BLE Stack"
help
Select the Bluetooth stack to use with Nordic BLE drivers.
config BLUETOOTH_STACK_HCI_RAW
bool "Bluetooth RAW HCI access to the controller"
config BLUETOOTH_HCI_RAW
bool "RAW HCI access"
help
This option allows to access Bluetooth controller
from the application with the RAW HCI protocol.
endchoice
comment "HCI Stack Configurations"
depends on BLUETOOTH_STACK_HCI
config BLUETOOTH_LE
bool "Bluetooth Low Energy (LE) support"
# Virtual/hidden option to make the conditions more intuitive
config BLUETOOTH_HCI_HOST
bool
default y
depends on !BLUETOOTH_HCI_RAW
select TINYCRYPT
select TINYCRYPT_AES if BLUETOOTH_SMP
select TINYCRYPT_AES_CMAC if BLUETOOTH_SMP
select TINYCRYPT_SHA256
select TINYCRYPT_SHA256_HMAC
select TINYCRYPT_SHA256_HMAC_PRNG
depends on BLUETOOTH_STACK_HCI
help
This option enables Bluetooth Low Energy (LE) support.
Currently it is mandatory whenever Bluetooth support
(CONFIG_BLUETOOTH) is enabled.
if BLUETOOTH_LE || BLUETOOTH_STACK_HCI_RAW
config BLUETOOTH_HCI_CMD_COUNT
int "Number of HCI command buffers"
default 2
@ -106,18 +71,17 @@ config BLUETOOTH_MAX_EVT_LEN
for LE is the Command Complete for Read Local Supported
Commands. It is a 3 byte Command Complete header + 65 byte
return parameters = 68 bytes in total.
endif # BLUETOOTH_LE || BLUETOOTH_STACK_HCI_RAW
config BLUETOOTH_UART_TO_HOST_DEV_NAME
string "Device Name of UART Device to an external Bluetooth Host"
default "UART_0"
depends on BLUETOOTH_STACK_HCI_RAW
depends on BLUETOOTH_HCI_RAW
help
This option specifies the name of UART device to be used
to connect to an external Bluetooth Host when Zephyr is
acting as a Bluetooth Controller.
if (BLUETOOTH_LE && BLUETOOTH_CONN) || BLUETOOTH_STACK_HCI_RAW
if BLUETOOTH_CONN || BLUETOOTH_HCI_RAW
config BLUETOOTH_ACL_IN_COUNT
int "Number of incoming ACL data buffers"
default 5
@ -134,9 +98,9 @@ config BLUETOOTH_L2CAP_IN_MTU
range 65 1300 if BLUETOOTH_SMP
help
Maximum size of each incoming L2CAP PDU.
endif # BLUETOOTH_LE && BLUETOOTH_CONN || BLUETOOTH_STACK_HCI_RAW
endif # BLUETOOTH_CONN || BLUETOOTH_HCI_RAW
if BLUETOOTH_LE
if BLUETOOTH_HCI_HOST
config BLUETOOTH_INTERNAL_STORAGE
bool "Use an internal persistent storage handler"
depends on FILE_SYSTEM
@ -204,6 +168,8 @@ config BLUETOOTH_ATT_REQ_COUNT
config BLUETOOTH_SMP
bool "Security Manager Protocol support"
select TINYCRYPT_AES
select TINYCRYPT_AES_CMAC
default n
help
This option enables support for the Security Manager Protocol
@ -299,7 +265,7 @@ config BLUETOOTH_TINYCRYPT_ECC
controller doesn't support required HCI commands LE Secure
Connections support will be disabled.
endif # BLUETOOTH_LE
endif # BLUETOOTH_HCI_HOST
config BLUETOOTH_MAX_CONN
int "Maximum number of simultaneous connections"
@ -335,7 +301,6 @@ config BLUETOOTH_DEBUG_LOG
config BLUETOOTH_DEBUG_MONITOR
bool "Monitor protocol over UART"
depends on BLUETOOTH_STACK_HCI
select BLUETOOTH_DEBUG
select CONSOLE_HAS_DRIVER
help
@ -371,7 +336,7 @@ config BLUETOOTH_MONITOR_ON_DEV_NAME
if BLUETOOTH_DEBUG
config BLUETOOTH_DEBUG_HCI_CORE
bool "Bluetooth HCI core debug"
depends on BLUETOOTH_STACK_HCI
depends on BLUETOOTH_HCI_HOST
default n
help
This option enables debug support for Bluetooth HCI
@ -387,7 +352,7 @@ config BLUETOOTH_DEBUG_CONN
config BLUETOOTH_DEBUG_KEYS
bool "Bluetooth security keys debug"
depends on BLUETOOTH_STACK_HCI
depends on BLUETOOTH_HCI_HOST
depends on BLUETOOTH_SMP
default n
help
@ -404,7 +369,7 @@ config BLUETOOTH_DEBUG_L2CAP
config BLUETOOTH_DEBUG_SMP
bool "Bluetooth Security Manager Protocol (SMP) debug"
depends on BLUETOOTH_STACK_HCI
depends on BLUETOOTH_HCI_HOST
depends on BLUETOOTH_SMP
default n
help
@ -488,7 +453,7 @@ endif # BLUETOOTH_DEBUG
config BLUETOOTH_BREDR
bool "Bluetooth BR/EDR support [EXPERIMENTAL]"
default n
depends on BLUETOOTH_STACK_HCI
depends on BLUETOOTH_HCI_HOST
select BLUETOOTH_CONN
select BLUETOOTH_L2CAP_DYNAMIC_CHANNEL
help
@ -544,4 +509,3 @@ config BLUETOOTH_BREDR_NAME
Bluetooth BR/EDR name. Name can be up to 248 bytes long (excluding
NULL termination). Can be empty string.
endif # BLUETOOTH_BREDR
endif # BLUETOOTH

7
subsys/bluetooth/host/Makefile
View file

@ -1,11 +1,8 @@
ccflags-y +=-I$(srctree)/include/drivers
obj-$(CONFIG_BLUETOOTH_STACK_HCI) += \
uuid.o \
hci_core.o
obj-$(CONFIG_BLUETOOTH_HCI_HOST) += uuid.o hci_core.o
obj-$(CONFIG_BLUETOOTH_STACK_HCI_RAW) += \
hci_raw.o
obj-$(CONFIG_BLUETOOTH_HCI_RAW) += hci_raw.o
obj-$(CONFIG_BLUETOOTH_DEBUG) += log.o

1
tests/bluetooth/init/prj.conf
View file

@ -1,3 +1,2 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y

1
tests/bluetooth/init/prj_0.conf
View file

@ -1,2 +1 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y

1
tests/bluetooth/init/prj_1.conf
View file

@ -1,3 +1,2 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y

1
tests/bluetooth/init/prj_10.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_11.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_12.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_SMP=y
CONFIG_BLUETOOTH_SIGNING=y

1
tests/bluetooth/init/prj_13.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y
CONFIG_BLUETOOTH_SIGNING=y

1
tests/bluetooth/init/prj_14.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_15.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_16.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_USE_DEBUG_KEYS=y

1
tests/bluetooth/init/prj_17.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_18.conf
View file

@ -1,4 +1,3 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_BREDR=y

1
tests/bluetooth/init/prj_19.conf
View file

@ -1,4 +1,3 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_BREDR=y

1
tests/bluetooth/init/prj_2.conf
View file

@ -1,3 +1,2 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_CENTRAL=y

1
tests/bluetooth/init/prj_20.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_21.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_22.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_BREDR=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_3.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y

1
tests/bluetooth/init/prj_4.conf
View file

@ -1,4 +1,3 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_5.conf
View file

@ -1,4 +1,3 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_6.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_7.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_8.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_9.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_controller.conf
View file

@ -1,6 +1,5 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_controller_dbg.conf
View file

@ -1,6 +1,5 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_CONTROLLER=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/init/prj_h5.conf
View file

@ -1,3 +1,2 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_H5=y
CONFIG_BLUETOOTH_LE=y

1
tests/bluetooth/init/prj_h5_dbg.conf
View file

@ -1,5 +1,4 @@
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_H5=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_DEBUG_HCI_DRIVER=y

1
tests/bluetooth/shell/arduino_101.conf
View file

@ -1,6 +1,5 @@
CONFIG_MINIMAL_LIBC_EXTENDED=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_CONSOLE_HANDLER=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_CENTRAL=y

1
tests/bluetooth/shell/prj.conf
View file

@ -1,6 +1,5 @@
CONFIG_MINIMAL_LIBC_EXTENDED=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_CONSOLE_HANDLER=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_CENTRAL=y

1
tests/bluetooth/shell/prj_br.conf
View file

@ -1,6 +1,5 @@
CONFIG_MINIMAL_LIBC_EXTENDED=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_BREDR=y
CONFIG_BLUETOOTH_RFCOMM=y
CONFIG_CONSOLE_HANDLER=y

2
tests/bluetooth/shell/prj_nble.conf
View file

@ -1,7 +1,7 @@
CONFIG_MINIMAL_LIBC_EXTENDED=y
CONFIG_TEST_RANDOM_GENERATOR=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_NBLE=y
CONFIG_BLUETOOTH_CUSTOM=y
CONFIG_NBLE=y
CONFIG_CONSOLE_HANDLER=y
CONFIG_CONSOLE_HANDLER_SHELL=y

1
tests/bluetooth/shell/prj_nimble.conf
View file

@ -1,6 +1,5 @@
CONFIG_MINIMAL_LIBC_EXTENDED=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_CONSOLE_HANDLER=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_BLUETOOTH_CENTRAL=y

1
tests/bluetooth/test_bluetooth/prj.conf
View file

@ -2,7 +2,6 @@
# This option is NOT to be used in production code.
CONFIG_TEST_RANDOM_GENERATOR=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_NO_DRIVER=y
CONFIG_BLUETOOTH_DEBUG_LOG=y
CONFIG_UART_INTERRUPT_DRIVEN=n

1
tests/bluetooth/tester/default.conf
View file

@ -1,7 +1,6 @@
CONFIG_UART_PIPE=y
CONFIG_CONSOLE_HANDLER=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_SMP=y

2
tests/bluetooth/tester/nble.conf
View file

@ -1,7 +1,7 @@
CONFIG_UART_PIPE=y
CONFIG_CONSOLE_HANDLER=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_STACK_NBLE=y
CONFIG_BLUETOOTH_CUSTOM=y
CONFIG_NBLE=y
CONFIG_UART_CONSOLE=n
CONFIG_BLUETOOTH_ATT_PREPARE_COUNT=4

1
tests/bluetooth/tester/nimble.conf
View file

@ -1,7 +1,6 @@
CONFIG_UART_PIPE=y
CONFIG_CONSOLE_HANDLER=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_SMP=y

1
tests/bluetooth/tester/qemu.conf
View file

@ -1,7 +1,6 @@
CONFIG_UART_PIPE=y
CONFIG_CONSOLE_HANDLER=y
CONFIG_BLUETOOTH=y
CONFIG_BLUETOOTH_LE=y
CONFIG_BLUETOOTH_CENTRAL=y
CONFIG_BLUETOOTH_PERIPHERAL=y
CONFIG_BLUETOOTH_SMP=y