michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: modem: ublox-sara-r4: Convert to new DT_INST macros

Browse source 
Convert older DT_INST_ macro use the new include/devicetree.h
DT_INST macro APIs.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is contained in:
Kumar Gala 2020-03-25 10:03:16 -05:00 • committed by Kumar Gala
commit bf4246ad6b
1 changed files with 17 additions and 15 deletions
Download patch file Download diff file Expand all files Collapse all files

32
drivers/modem/ublox-sara-r4.c
View file

@ -4,6 +4,8 @@
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT ublox_sara_r4
#include <logging/log.h>
LOG_MODULE_REGISTER(modem_ublox_sara_r4, CONFIG_MODEM_LOG_LEVEL);
@ -32,37 +34,37 @@ LOG_MODULE_REGISTER(modem_ublox_sara_r4, CONFIG_MODEM_LOG_LEVEL);
enum mdm_control_pins {
MDM_POWER = 0,
MDM_RESET,
#if defined(DT_INST_0_UBLOX_SARA_R4_MDM_VINT_GPIOS_CONTROLLER)
#if DT_INST_NODE_HAS_PROP(0, mdm_vint_gpios)
MDM_VINT,
#endif
};
static struct modem_pin modem_pins[] = {
/* MDM_POWER */
MODEM_PIN(DT_INST_0_UBLOX_SARA_R4_MDM_POWER_GPIOS_CONTROLLER,
DT_INST_0_UBLOX_SARA_R4_MDM_POWER_GPIOS_PIN,
DT_INST_0_UBLOX_SARA_R4_MDM_POWER_GPIOS_FLAGS | GPIO_OUTPUT),
MODEM_PIN(DT_INST_GPIO_LABEL(0, mdm_power_gpios),
DT_INST_GPIO_PIN(0, mdm_power_gpios),
DT_INST_GPIO_FLAGS(0, mdm_power_gpios) | GPIO_OUTPUT),
/* MDM_RESET */
MODEM_PIN(DT_INST_0_UBLOX_SARA_R4_MDM_RESET_GPIOS_CONTROLLER,
DT_INST_0_UBLOX_SARA_R4_MDM_RESET_GPIOS_PIN,
DT_INST_0_UBLOX_SARA_R4_MDM_RESET_GPIOS_FLAGS | GPIO_OUTPUT),
MODEM_PIN(DT_INST_GPIO_LABEL(0, mdm_reset_gpios),
DT_INST_GPIO_PIN(0, mdm_reset_gpios),
DT_INST_GPIO_FLAGS(0, mdm_reset_gpios) | GPIO_OUTPUT),
#if defined(DT_INST_0_UBLOX_SARA_R4_MDM_VINT_GPIOS_CONTROLLER)
#if DT_INST_NODE_HAS_PROP(0, mdm_vint_gpios)
/* MDM_VINT */
MODEM_PIN(DT_INST_0_UBLOX_SARA_R4_MDM_VINT_GPIOS_CONTROLLER,
DT_INST_0_UBLOX_SARA_R4_MDM_VINT_GPIOS_PIN,
DT_INST_0_UBLOX_SARA_R4_MDM_VINT_GPIOS_FLAGS | GPIO_INPUT),
MODEM_PIN(DT_INST_GPIO_LABEL(0, mdm_vint_gpios),
DT_INST_GPIO_PIN(0, mdm_vint_gpios),
DT_INST_GPIO_FLAGS(0, mdm_vint_gpios) | GPIO_INPUT),
#endif
};
#define MDM_UART_DEV_NAME DT_INST_0_UBLOX_SARA_R4_BUS_NAME
#define MDM_UART_DEV_NAME DT_INST_BUS_LABEL(0)
#define MDM_POWER_ENABLE 1
#define MDM_POWER_DISABLE 0
#define MDM_RESET_NOT_ASSERTED 1
#define MDM_RESET_ASSERTED 0
#if defined(DT_INST_0_UBLOX_SARA_R4_MDM_VINT_GPIOS_CONTROLLER)
#if DT_INST_NODE_HAS_PROP(0, mdm_vint_gpios)
#define MDM_VINT_ENABLE 1
#define MDM_VINT_DISABLE 0
#endif
@ -637,7 +639,7 @@ static int pin_init(void)
k_sleep(K_SECONDS(1));
/* make sure module is powered off */
#if defined(DT_INST_0_UBLOX_SARA_R4_MDM_VINT_GPIOS_CONTROLLER)
#if DT_INST_NODE_HAS_PROP(0, mdm_vint_gpios)
LOG_DBG("Waiting for MDM_VINT_PIN = 0");
while (modem_pin_read(&mctx, MDM_VINT) != MDM_VINT_DISABLE) {
@ -671,7 +673,7 @@ static int pin_init(void)
LOG_DBG("MDM_POWER_PIN -> ENABLE");
#if defined(DT_INST_0_UBLOX_SARA_R4_MDM_VINT_GPIOS_CONTROLLER)
#if DT_INST_NODE_HAS_PROP(0, mdm_vint_gpios)
LOG_DBG("Waiting for MDM_VINT_PIN = 1");
do {
k_sleep(K_MSEC(100));