michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: can: stm32: use clock control API for FDCAN driver

Browse source 
The FDCAN clock was being enabled using HAL APIs instead of the generic
clock control API.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit is contained in:
Gerard Marull-Paretas 2022-06-13 15:18:26 +02:00 • committed by Carles Cufí
commit bd39b63760
1 changed files with 23 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

30
drivers/can/can_stm32fd.c
View file

@ -6,6 +6,8 @@
*/
#include <zephyr/drivers/can.h>
#include <zephyr/drivers/clock_control/stm32_clock_control.h>
#include <zephyr/drivers/clock_control.h>
#include <zephyr/drivers/pinctrl.h>
#include <zephyr/kernel.h>
#include <soc.h>
@ -44,6 +46,7 @@ LOG_MODULE_REGISTER(can_stm32fd, CONFIG_CAN_LOG_LEVEL);
#define DT_DRV_COMPAT st_stm32_fdcan
struct can_stm32fd_config {
struct stm32_pclken pclken;
void (*config_irq)(void);
const struct pinctrl_dev_config *pcfg;
};
@ -64,8 +67,12 @@ static int can_stm32fd_get_core_clock(const struct device *dev, uint32_t *rate)
return 0;
}
static void can_stm32fd_clock_enable(void)
static int can_stm32fd_clock_enable(const struct device *dev)
{
int ret;
const struct can_mcan_config *mcan_cfg = dev->config;
const struct can_stm32fd_config *stm32fd_cfg = mcan_cfg->custom;
LL_RCC_SetFDCANClockSource(CAN_STM32FD_CLOCK_SOURCE);
/* LL_RCC API names do not align with PLL output name but are correct */
@ -75,11 +82,11 @@ static void can_stm32fd_clock_enable(void)
LL_RCC_PLL2_EnableDomain_SAI();
#endif
#ifdef CONFIG_SOC_SERIES_STM32U5X
LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_FDCAN1);
#else
__HAL_RCC_FDCAN_CLK_ENABLE();
#endif
ret = clock_control_on(DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE),
(clock_control_subsys_t *)&stm32fd_cfg->pclken);
if (ret < 0) {
return ret;
}
FDCAN_CONFIG->CKDIV = CAN_STM32FD_CLOCK_DIVISOR >> 1;
}
@ -97,7 +104,12 @@ static int can_stm32fd_init(const struct device *dev)
return ret;
}
can_stm32fd_clock_enable();
ret = can_stm32fd_clock_enable(dev);
if (ret < 0) {
LOG_ERR("Could not turn on CAN clock (%d)", ret);
return ret;
}
ret = can_mcan_init(dev);
if (ret != 0) {
return ret;
@ -173,6 +185,10 @@ static void config_can_##inst##_irq(void) \
PINCTRL_DT_INST_DEFINE(inst); \
\
static const struct can_stm32fd_config can_stm32fd_cfg_##inst = { \
.pclken = { \
.enr = DT_INST_CLOCKS_CELL(inst, bits), \
.bus = DT_INST_CLOCKS_CELL(inst, bus), \
}, \
.config_irq = config_can_##inst##_irq, \
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(inst), \
}; \