michaelh/zephyr
1
0
Fork 0
Code Releases Activity

dts: arm: stm32f3: Add pinctrl node and uart pin configurations

Browse source 
Add needed uart pinctrl configuration in pinmux node.
This is done thanks to <soc>-pinctrl.dtsi file matching
<soc>.dtsi files
Populate stm32 f3 based boards dts files with references
to uart pinctrl nodes

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit is contained in:
Erwan Gouriou 2017-07-25 11:03:31 +02:00 • committed by Kumar Gala
commit bcdb4825a4
5 changed files with 98 additions and 1 deletions
Download patch file Download diff file Expand all files Collapse all files

17
dts/arm/nucleo_f334r8.dts
View file

@ -18,7 +18,22 @@
}; };
}; };
&usart2 { &usart1 {
current-speed = <115200>; current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok"; status = "ok";
}; };
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
};
&usart3 {
current-speed = <115200>;
pinctrl-0 = <&usart3_pins_a>;
pinctrl-names = "default";
};

68
dts/arm/st/stm32f3-pinctrl.dtsi Normal file
View file

@ -0,0 +1,68 @@
/*
* Copyright (c) 2017 Linaro Limited
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <dt-bindings/pinctrl/stm32-pinctrl.h>
/ {
soc {
pinctrl: pin-controller {
usart1_pins_a: usart1@0 {
rx_tx {
rx = <STM32_PIN_PB6 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUPDR_NO_PULL)>;
tx = <STM32_PIN_PB7 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUSHPULL_NOPULL)>;
};
};
usart1_pins_b: usart1@1 {
rx_tx {
rx = <STM32_PIN_PA10 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUPDR_NO_PULL)>;
tx = <STM32_PIN_PA9 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUSHPULL_NOPULL)>;
};
};
usart1_pins_c: usart1@2 {
rx_tx {
rx = <STM32_PIN_PG10 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUPDR_NO_PULL)>;
tx = <STM32_PIN_PB6 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUSHPULL_NOPULL)>;
};
};
usart2_pins_a: usart2@0 {
rx_tx {
rx = <STM32_PIN_PA3 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUPDR_NO_PULL)>;
tx = <STM32_PIN_PA2 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUSHPULL_NOPULL)>;
};
};
usart2_pins_b: usart2@1 {
rx_tx {
rx = <STM32_PIN_PA15 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUPDR_NO_PULL)>;
tx = <STM32_PIN_PA2 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUSHPULL_NOPULL)>;
};
};
usart2_pins_c: usart2@2 {
rx_tx {
rx = <STM32_PIN_PD6 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUPDR_NO_PULL)>;
tx = <STM32_PIN_PA2 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUSHPULL_NOPULL)>;
};
};
usart2_pins_d: usart2@3 {
rx_tx {
rx = <STM32_PIN_PD6 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUPDR_NO_PULL)>;
tx = <STM32_PIN_PD5 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUSHPULL_NOPULL)>;
};
};
usart3_pins_a: usart3@0 {
rx_tx {
rx = <STM32_PIN_PB11 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUPDR_NO_PULL)>;
tx = <STM32_PIN_PB10 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUSHPULL_NOPULL)>;
};
};
usart3_pins_b: usart3@1 {
rx_tx {
rx = <STM32_PIN_PD9 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUPDR_NO_PULL)>;
tx = <STM32_PIN_PD8 (STM32_PINMUX_ALT_FUNC_7 | STM32_PUSHPULL_NOPULL)>;
};
};
};
};
};

8
dts/arm/st/stm32f3.dtsi
View file

@ -4,6 +4,7 @@
* SPDX-License-Identifier: Apache-2.0 * SPDX-License-Identifier: Apache-2.0
*/ */
#include <st/stm32f3-pinctrl.dtsi>
#include <arm/armv7-m.dtsi> #include <arm/armv7-m.dtsi>
#include <st/mem.h> #include <st/mem.h>
#include <dt-bindings/clock/stm32_clock.h> #include <dt-bindings/clock/stm32_clock.h>
@ -39,6 +40,13 @@
label = "STM32_CLK_RCC"; label = "STM32_CLK_RCC";
}; };
pinctrl: pin-controller {
compatible = "st,stm32-pinmux";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x48000000 0x1800>;
};
usart1: serial@40013800 { usart1: serial@40013800 {
compatible = "st,stm32-usart", "st,stm32-uart"; compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40013800 0x400>; reg = <0x40013800 0x400>;

2
dts/arm/stm32373c_eval.dts
View file

@ -20,5 +20,7 @@
&usart2 { &usart2 {
current-speed = <115200>; current-speed = <115200>;
pinctrl-0 = <&usart2_pins_d>;
pinctrl-names = "default";
status = "ok"; status = "ok";
}; };

4
dts/arm/stm32f3_disco.dts
View file

@ -20,10 +20,14 @@
&usart1 { &usart1 {
current-speed = <115200>; current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok"; status = "ok";
}; };
&usart2 { &usart2 {
current-speed = <115200>; current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok"; status = "ok";
}; };