michaelh/zephyr
1
0
Fork 0
Code Releases Activity

doc: release-notes-3.7.rst: STM32 additions

Browse source 
Update V3.7.0 release notes with new SoC, boards, drivers and features
related to STM32.

Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
This commit is contained in:
Erwan Gouriou 2024-07-02 14:23:30 +02:00 • committed by Alberto Escolar
commit b98efa2b87
1 changed files with 90 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

92
doc/releases/release-notes-3.7.rst
View file

@ -298,10 +298,16 @@ Boards & SoC Support
* Added support for these SoC series: * Added support for these SoC series:
* Added support for Ambiq Apollo3 Blue and Apollo3 Blue Plus SoC series. * Added support for Ambiq Apollo3 Blue and Apollo3 Blue Plus SoC series.
* Added support for STM32H7R/S SoC series.
* Made these changes in other SoC series: * Made these changes in other SoC series:
* ITE: Rename the Kconfig symbol for all ITE SoC variants. * ITE: Rename the Kconfig symbol for all ITE SoC variants.
* STM32: Enabled ART Accelerator, I-cache, D-cache and prefetch on compatible series.
* STM32H5: Added support for Stop mode and :kconfig:option:`CONFIG_PM`.
* STM32WL: Decreased Sub-GHz SPI frequency from 12 to 8MHz.
* STM32C0: Added support for :kconfig:option:`CONFIG_POWEROFF`.
* STM32U5: Added support for Stop3 mode.
* Added support for these ARM boards: * Added support for these ARM boards:
@ -312,11 +318,23 @@ Boards & SoC Support
* Added support for :ref:`Mikroe RA4M1 Clicker board <mikroe_clicker_ra4m1>`: ``mikroe_clicker_ra4m1``. * Added support for :ref:`Mikroe RA4M1 Clicker board <mikroe_clicker_ra4m1>`: ``mikroe_clicker_ra4m1``.
* Added support for :ref:`Arduino UNO R4 WiFi board <arduino_uno_r4>`: ``arduino_uno_r4_wifi``. * Added support for :ref:`Arduino UNO R4 WiFi board <arduino_uno_r4>`: ``arduino_uno_r4_wifi``.
* Added support for :ref:`Renesas EK-RA8M1 board <ek_ra8m1>`: ``ek_ra8m1``. * Added support for :ref:`Renesas EK-RA8M1 board <ek_ra8m1>`: ``ek_ra8m1``.
* Added support for :ref:`ST Nucleo H533RE <nucleo_h533re_board>`: ``nucleo_h533re``.
* Added support for :ref:`ST STM32C0116-DK Discovery Kit <stm32c0116_dk_board>`: ``stm32c0116_dk``.
* Added support for :ref:`ST STM32H745I Discovery <stm32h745i_disco_board>`: ``stm32h745i_disco``.
* Added support for :ref:`ST STM32H7S78-DK Discovery <stm32h7s78_dk_board>`: ``stm32h7s78_dk``.
* Added support for :ref:`ST STM32L152CDISCOVERY board <stm32l1_disco_board>`: ``stm32l152c_disco``.
* Added support for :ref:`ST STEVAL STWINBX1 Development kit <steval_stwinbx1_board>`: ``steval_stwinbx1``.
* Added support for these Xtensa boards: * Added support for these Xtensa boards:
* Made these changes for ARM boards: * Made these changes for ARM boards:
* On :ref:`ST STM32H7B3I Discovery Kit <stm32h7b3i_dk_board>`: ``stm32h7b3i_dk_board``,
enabled full cache management, Chrom-ART, double frame buffer and full refresh for
optimal LVGL perfomances.
* On ST STM32 boards, stm32cubeprogrammer runner can now be used to program external
flash using ``--extload`` option.
* Made these changes for RISC-V boards: * Made these changes for RISC-V boards:
* Made these changes for native/POSIX boards: * Made these changes for native/POSIX boards:
@ -365,6 +383,8 @@ Drivers and Sensors
* ADC * ADC
* Added support for STM32H7R/S series.
* Auxiliary Display * Auxiliary Display
* Audio * Audio
@ -376,6 +396,8 @@ Drivers and Sensors
* Battery backed up RAM * Battery backed up RAM
* Added support for STM32G0 and STM32H5 series.
* CAN * CAN
* Added :c:func:`can_get_bitrate_min` and :c:func:`can_get_bitrate_max` for retrieving the minimum * Added :c:func:`can_get_bitrate_min` and :c:func:`can_get_bitrate_max` for retrieving the minimum
@ -410,9 +432,13 @@ Drivers and Sensors
* Clock control * Clock control
* Added support for Microcontroller Clock Output (MCO) on STM32H5 series.
* Added support for MSI clock on STM32WL series.
* Counter * Counter
* Added support for Ambiq Apollo3 series. * Added support for Ambiq Apollo3 series.
* Added support for STM32H7R/S series.
* Crypto * Crypto
@ -427,6 +453,7 @@ Drivers and Sensors
:c:macro:`DISK_IOCTL_CTRL_DEINIT` macros, which allow for initializing :c:macro:`DISK_IOCTL_CTRL_DEINIT` macros, which allow for initializing
and de-initializing a disk at runtime. This allows hotpluggable and de-initializing a disk at runtime. This allows hotpluggable
disk devices (like SD cards) to be removed and reinserted at runtime. disk devices (like SD cards) to be removed and reinserted at runtime.
* Added SDMMC support for STM32H5 series.
* Display * Display
@ -455,6 +482,8 @@ Drivers and Sensors
* Entropy * Entropy
* Added support for STM32H7R/S series.
* EEPROM * EEPROM
* Added property for specifying ``address-width`` to :dtcompatible:`zephyr,i2c-target-eeprom`. * Added property for specifying ``address-width`` to :dtcompatible:`zephyr,i2c-target-eeprom`.
@ -470,6 +499,7 @@ Drivers and Sensors
* Driver nxp_enet is no longer experimental. * Driver nxp_enet is no longer experimental.
* All boards and SOCs with :dtcompatible:`nxp,kinetis-ethernet` compatible nodes * All boards and SOCs with :dtcompatible:`nxp,kinetis-ethernet` compatible nodes
reworked to use the new :dtcompatible:`nxp,enet` binding. reworked to use the new :dtcompatible:`nxp,enet` binding.
* Added support for PTP on compatible STM32 series (STM32F7, STM32H5 and STM32H7).
* Flash * Flash
@ -487,6 +517,11 @@ Drivers and Sensors
* Added the c:func:`flash_fill` utility function which allows to write * Added the c:func:`flash_fill` utility function which allows to write
a single value across a provided range in a selected device. a single value across a provided range in a selected device.
* Added support for RRAM on nrf54l15 devices. * Added support for RRAM on nrf54l15 devices.
* Added support of non busy wait polling in STM32 OSPI driver.
* Added support for STM32 XSPI external NOR flash driver (:dtcompatible:`st,stm32-xspi-nor`).
* Added support for XIP on external NOR flash in STM32 OSPI, QSPI and XSPI driver.
* STM32 OSPI driver: clk, dqs, ncs ports can now be configured by device tree
configurable (see :dtcompatible:`st,stm32-ospi`).
* GNSS * GNSS
@ -494,13 +529,29 @@ Drivers and Sensors
* Added support for Ambiq Apollo3 series. * Added support for Ambiq Apollo3 series.
* Added Broadcom Set-top box(brcmstb) SoC GPIO driver. * Added Broadcom Set-top box(brcmstb) SoC GPIO driver.
* Added c:macro:`STM32_GPIO_WKUP` flag which allows to configure specific pins as wakeup source
from Power Off state on STM32 L4, U5, WB, & WL SoC series.
* Hardware info
* Added device EUI64 ID support and implementation for STM32WB, STM32WBA and STM32WL series.
* I2C * I2C
* Added support for Ambiq Apollo3 series. * Added support for Ambiq Apollo3 series.
* In STM32 V2 driver, added support for a new :kconfig:option:`CONFIG_I2C_STM32_V2_TIMING`
which automatically computes bus timings which should be used to configure the hardware
block depending on the clock configuration in use. To avoid embedding this heavy algorithm
in a production application, a dedicated sample :zephyr:code-sample:`stm32_i2c_v2_timings` is provided
to get the output of the algorithm. Once bus timings configuration is available,
:kconfig:option:`CONFIG_I2C_STM32_V2_TIMING` could be disabled, bus timings configured
using device tree.
* Added support for STM32H5 series.
* I2S * I2S
* Added support for STM32H5 series.
* I3C * I3C
* Added shell support for querying bus and CCC commands. * Added shell support for querying bus and CCC commands.
@ -531,8 +582,14 @@ Drivers and Sensors
* Added driver for Reyax LoRa module * Added driver for Reyax LoRa module
* Mailbox
* Added support for HSEM based STM32 driver.
* MDIO * MDIO
* Added support for STM32 MDIO controller driver.
* MFD * MFD
* Modem * Modem
@ -570,6 +627,8 @@ Drivers and Sensors
* PWM * PWM
* Added support for STM32H7R/S series.
* Regulators * Regulators
* Reset * Reset
@ -583,24 +642,31 @@ Drivers and Sensors
* RTC * RTC
* Added Raspberry Pi Pico RTC driver. * Added Raspberry Pi Pico RTC driver.
* Added support for :kconfig:option:`CONFIG_RTC_ALARM` on all STM32 MCU series (except STM32F1).
* SMBUS: * SMBUS
* SDHC * SDHC
* Added ESP32 SDHC driver (:dtcompatible:`espressif,esp32-sdhc`). * Added ESP32 SDHC driver (:dtcompatible:`espressif,esp32-sdhc`).
* Added SDHC driver for Renesas MMC controller (:dtcompatible:`renesas,rcar-mmc`). * Added SDHC driver for Renesas MMC controller (:dtcompatible:`renesas,rcar-mmc`).
* Sensor * Sensors
* Added TMP114 driver * Added TMP114 driver
* Added DS18S20 1-wire temperature sensor driver. * Added DS18S20 1-wire temperature sensor driver.
* STM32 QDEC driver now supports encoder mode configuration (see :dtcompatible:`st,stm32-qdec`).
* Added support for STM32 Digital Temperature Sensor (:dtcompatible:`st,stm32-digi-temp`).
* Serial * Serial
* Added driver to support UART over Bluetooth LE using NUS (Nordic UART Service). This driver * Added driver to support UART over Bluetooth LE using NUS (Nordic UART Service). This driver
enables using Bluetooth as a transport to all the subsystems that are currently supported by enables using Bluetooth as a transport to all the subsystems that are currently supported by
UART (e.g: Console, Shell, Logging). UART (e.g: Console, Shell, Logging).
* Added :kconfig:option:`CONFIG_NOCACHE_MEMORY` support in async DMA mode in STM32 driver.
It is now possible to use UART in DMA mode with :kconfig:option:`CONFIG_DCACHE` enabled
on STM32 F7 & H7 SoC series, as long as DMA buffers are placed in an uncached memory section.
* Added support for STM32H7R/S series.
* Added support for HSCIF (High Speed Serial Communication Interface with FIFO) in the UART * Added support for HSCIF (High Speed Serial Communication Interface with FIFO) in the UART
driver for Renesas RCar platforms. driver for Renesas RCar platforms.
@ -673,9 +739,16 @@ Drivers and Sensors
* Added support for Ambiq Apollo3 series general IOM based SPI. * Added support for Ambiq Apollo3 series general IOM based SPI.
* Added support for Ambiq Apollo3 BLEIF based SPI, which is specific for internal HCI. * Added support for Ambiq Apollo3 BLEIF based SPI, which is specific for internal HCI.
* Added support for :kconfig:option:`CONFIG_PM` and :kconfig:option:`CONFIG_PM_DEVICE_RUNTIME` on STM32 SPI driver.
* Added support for :kconfig:option:`CONFIG_NOCACHE_MEMORY` in DMA SPI mode for STM32F7x SoC series.
* Added support for STM32H7R/S series.
* USB * USB
* Video
* Added support for STM32 Digital camera interface (DCMI) driver (:dtcompatible:`st,stm32-dcmi`).
* W1 * W1
* Watchdog * Watchdog
@ -683,6 +756,7 @@ Drivers and Sensors
* Added :kconfig:option:`CONFIG_WDT_NPCX_WARNING_LEADING_TIME_MS` to set the leading warning time * Added :kconfig:option:`CONFIG_WDT_NPCX_WARNING_LEADING_TIME_MS` to set the leading warning time
in milliseconds. Removed no longer used :kconfig:option:`CONFIG_WDT_NPCX_DELAY_CYCLES`. in milliseconds. Removed no longer used :kconfig:option:`CONFIG_WDT_NPCX_DELAY_CYCLES`.
* Added support for Ambiq Apollo3 series. * Added support for Ambiq Apollo3 series.
* Added support for STM32H7R/S series.
* Wi-Fi * Wi-Fi
@ -1123,6 +1197,20 @@ HALs
* STM32 * STM32
* Updated STM32F0 to cube version V1.11.5.
* Updated STM32F3 to cube version V1.11.5.
* Updated STM32F4 to cube version V1.28.0.
* Updated STM32F7 to cube version V1.17.2.
* Updated STM32G0 to cube version V1.6.2.
* Updated STM32G4 to cube version V1.5.2.
* Updated STM32H5 to cube version V1.2.0.
* Updated STM32H7 to cube version V1.11.2.
* Updated STM32L5 to cube version V1.5.1.
* Updated STM32U5 to cube version V1.5.0.
* Updated STM32WB to cube version V1.19.1.
* Updated STM32WBA to cube version V1.3.1.
* Added STM32H7R/S with cube version V1.0.0.
MCUboot MCUboot
******* *******