drivers: Remove legacy nanokernel.h include

This commit replaces the nanokernel.h include by kernel.h.

Change-Id: Ib42fbf2d9f77a73c0831f569b3dbbfb342ea2e1d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>

drivers/adc/adc_dw.c

@@ -19,7 +19,7 @@
 #include <errno.h>
 
 #include <init.h>
-#include <nanokernel.h>
+#include <kernel.h>
 #include <string.h>
 #include <stdlib.h>
 #include <board.h>

drivers/clock_control/quark_se_clock_control.c

@@ -16,7 +16,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 
 #include <misc/__assert.h>

drivers/console/ram_console.c

@@ -17,7 +17,7 @@
  */
 
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <misc/printk.h>
 #include <device.h>
 #include <init.h>

drivers/console/uart_pipe.c

@@ -21,7 +21,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 
 #include <board.h>
 #include <uart.h>

drivers/flash/soc_flash_ksdk.c

@@ -15,7 +15,7 @@
  */
 
 #include <misc/sys_log.h>
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <string.h>
 #include <flash.h>

drivers/flash/soc_flash_nrf5.c

@@ -17,7 +17,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <soc.h>

drivers/gpio/gpio_atmel_sam3.c

@@ -20,7 +20,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 
 #include <device.h>
 #include <init.h>

drivers/gpio/gpio_cmsdk_ahb.c

@@ -14,7 +14,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 
 #include <device.h>
 #include <errno.h>

drivers/gpio/gpio_dw.c

@@ -16,7 +16,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <gpio.h>
 #include "gpio_dw.h"
 #include "gpio_utils.h"

drivers/gpio/gpio_k64.c

@@ -20,7 +20,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <gpio.h>

drivers/gpio/gpio_k64.h

@@ -21,7 +21,7 @@
 #ifndef _GPIO_K64_H_
 #define _GPIO_K64_H_
 
-#include <nanokernel.h>
+#include <kernel.h>
 
 #include <gpio.h>
 

drivers/gpio/gpio_nrf5.c

@@ -20,7 +20,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <gpio.h>

drivers/gpio/gpio_stm32.c

@@ -16,7 +16,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <soc.h>
 #include <gpio.h>

drivers/grove/lcd_rgb.c

@@ -15,7 +15,7 @@
  */
 
 #include <errno.h>
-#include <nanokernel.h>
+#include <kernel.h>
 #include <init.h>
 #include <stdbool.h>
 

drivers/i2c/i2c_atmel_sam3.c

@@ -34,7 +34,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 
 #include <board.h>
 #include <i2c.h>

drivers/i2c/i2c_dw.c

@@ -21,7 +21,7 @@
 #include <stdbool.h>
 
 #include <i2c.h>
-#include <nanokernel.h>
+#include <kernel.h>
 #include <init.h>
 #include <arch/cpu.h>
 #include <string.h>

drivers/interrupt_controller/arcv2_irq_unit.c

@@ -25,9 +25,10 @@
  * interrupt unit. The ARCv2 interrupt unit is highly programmable.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <board.h>
+
 extern void *_VectorTable;
 
 void _arc_v2_irq_unit_init(void)

drivers/interrupt_controller/i8259.c

@@ -23,7 +23,7 @@
  */
 
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <toolchain.h>
 #include <sections.h>

drivers/interrupt_controller/ioapic_intr.c

@@ -60,7 +60,7 @@
  *
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 
 #include "board.h"

drivers/interrupt_controller/loapic_intr.c

@@ -87,7 +87,7 @@
  * INCLUDE FILES: loapic.h
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <stdint.h>
 #include <string.h>

drivers/interrupt_controller/mvic.c

@@ -42,7 +42,7 @@
 
 /* includes */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <misc/__assert.h>
 #include <misc/util.h>

drivers/interrupt_controller/system_apic.c

@@ -22,7 +22,7 @@
 
 #include <misc/__assert.h>
 #include "board.h"
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <drivers/ioapic.h>
 #include <drivers/loapic.h>

drivers/ipm/ipm_quark_se.c

@@ -16,7 +16,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <stdint.h>
 #include <string.h>
 #include <device.h>

drivers/ipm/ipm_quark_se.h

@@ -20,7 +20,7 @@
 #ifndef __INCquark_se_mailboxh
 #define __INCquark_se_mailboxh
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <board.h> /* for SCSS_REGISTER_BASE */
 #include <ipm.h>
 #include <device.h>

drivers/pci/pci.c

@@ -79,7 +79,7 @@
  * That will work as long as there are relevant results found.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <misc/printk.h>
 #include <toolchain.h>

drivers/pci/pci_config.c

@@ -23,7 +23,7 @@
  *
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 
 #include <pci/pci_mgr.h>

drivers/pci/pci_interface.c

@@ -22,7 +22,7 @@
  * This module implements the PCI H/W access functions.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 
 #include <pci/pci_mgr.h>

drivers/pci/pci_legacy_bridge.c

@@ -22,7 +22,7 @@
  * detection of the bridge and using the bridge to configure the routing between
  * PCI interrupt pins and IRQs.
  */
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 
 #include <drivers/pci/pci_mgr.h>

drivers/pinmux/beetle/pinmux_board_v2m_beetle.c

@@ -16,7 +16,7 @@
 
 #include <device.h>
 #include <init.h>
-#include <nanokernel.h>
+#include <kernel.h>
 #include <pinmux.h>
 #include <soc.h>
 #include <sys_io.h>

drivers/pinmux/dev/pinmux_dev_arm_beetle.c

@@ -13,7 +13,7 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
-#include <nanokernel.h>
+#include <kernel.h>
 #include <board.h>
 
 #include <device.h>

drivers/pinmux/dev/pinmux_dev_atmel_sam3x.c

@@ -13,7 +13,7 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
-#include <nanokernel.h>
+#include <kernel.h>
 #include <board.h>
 
 #include <device.h>

drivers/pinmux/dev/pinmux_dev_k64.c

@@ -18,7 +18,7 @@
 
 #include <device.h>
 #include <init.h>
-#include <nanokernel.h>
+#include <kernel.h>
 #include <pinmux.h>
 #include <soc.h>
 #include <sys_io.h>

drivers/pinmux/dev/pinmux_dev_stm32.c

@@ -23,7 +23,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <soc.h>
 #include "pinmux.h"

drivers/pinmux/k64/pinmux.c

@@ -18,7 +18,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <soc.h>

drivers/pinmux/k64/pinmux_board_frdm_k64f.c

@@ -16,7 +16,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <sys_io.h>

drivers/pinmux/k64/pinmux_board_hexiwear.c

@@ -17,7 +17,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <sys_io.h>

drivers/pinmux/stm32/pinmux_board_carbon.c

@@ -14,7 +14,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <pinmux.h>

drivers/pinmux/stm32/pinmux_board_nucleo_f103rb.c

@@ -14,7 +14,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <pinmux.h>

drivers/pinmux/stm32/pinmux_board_nucleo_f401re.c

@@ -14,7 +14,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <pinmux.h>

drivers/pinmux/stm32/pinmux_board_olimexino_stm32.c

@@ -14,7 +14,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <pinmux.h>

drivers/pinmux/stm32/pinmux_board_stm32_mini_a15.c

@@ -14,7 +14,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <init.h>
 #include <pinmux.h>

drivers/pinmux/stm32/pinmux_stm32.c

@@ -23,7 +23,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <soc.h>
 #include "pinmux.h"

drivers/pwm/pwm_dw.c

@@ -29,7 +29,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <board.h>
 #include <pwm.h>
 

drivers/pwm/pwm_k64_ftm.c

@@ -47,7 +47,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 
 #include <board.h>
 #include <k20_sim.h>

drivers/pwm/pwm_pca9685.c

@@ -20,7 +20,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 
 #include <i2c.h>
 #include <pwm.h>

drivers/random/rand32_timer.c

@@ -26,7 +26,7 @@
 
 #include <drivers/rand32.h>
 #include <drivers/system_timer.h>
-#include <nanokernel.h>
+#include <kernel.h>
 #include <atomic.h>
 
 #if defined(__GNUC__)

drivers/random/rand32_timestamp.c

@@ -24,7 +24,7 @@
  * provide a random number generator.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <drivers/rand32.h>
 

drivers/sensor/bmi160/bmi160.c

@@ -150,7 +150,7 @@ static int bmi160_pmu_set(struct device *dev, union bmi160_pmu_status *pmu_sts)
 		}
 
 		/*
-		 * Cannot use a nano timer here since this is called from the
+		 * Cannot use a timer here since this is called from the
 		 * init function and the timeouts were not initialized yet.
 		 */
 		k_busy_wait(cmds[i].delay_us);

drivers/serial/uart_altera_jtag.c

@@ -15,7 +15,7 @@
  */
 
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <uart.h>
 #include <sys_io.h>

drivers/serial/uart_atmel_sam3.c

@@ -28,7 +28,7 @@
  * (used uart_stellaris.c as template)
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <misc/__assert.h>
 #include <board.h>

drivers/serial/uart_cc32xx.c

@@ -16,7 +16,7 @@
 
 /* See www.ti.com/lit/pdf/swru367, section 6, for CC3200 UART info. */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <uart.h>
 

drivers/serial/uart_cmsdk_apb.c

@@ -20,7 +20,7 @@
  * UART has two wires for RX and TX, and does not provide CTS or RTS.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <misc/__assert.h>
 #include <board.h>

drivers/serial/uart_k20.c

@@ -21,7 +21,7 @@
  * called to setup the port.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <stdint.h>
 

drivers/serial/uart_nrf5.c

@@ -18,7 +18,7 @@
  * @brief Driver for Nordic Semiconductor nRF5X UART
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <misc/__assert.h>
 #include <board.h>

drivers/serial/uart_ns16550.c

@@ -32,7 +32,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <stdint.h>
 

drivers/serial/uart_nsim.c

@@ -16,7 +16,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <sections.h>
 #include <misc/__assert.h>

drivers/serial/uart_stellaris.c

@@ -26,7 +26,7 @@
  * and STDOUT_CONSOLE APIs.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <misc/__assert.h>
 #include <board.h>

drivers/serial/uart_stm32.c

@@ -25,7 +25,7 @@
  *             transmitter (USART)
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <misc/__assert.h>
 #include <board.h>

drivers/shared_irq/shared_irq.c

@@ -16,7 +16,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <device.h>
 #include <shared_irq.h>
 #include <init.h>

drivers/spi/spi_dw.c

@@ -18,7 +18,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 
 #include <misc/__assert.h>

drivers/spi/spi_intel.c

@@ -18,7 +18,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 
 #include <misc/__assert.h>

drivers/spi/spi_k64.c

@@ -48,7 +48,7 @@
 
 #include <errno.h>
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 
 #include <misc/util.h>

drivers/timer/altera_avalon_timer.c

@@ -14,7 +14,7 @@
  * limitations under the License.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <device.h>
 #include <system_timer.h>

drivers/timer/arcv2_timer0.c

@@ -51,7 +51,7 @@
  * @endinternal
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <arch/cpu.h>
 #include <toolchain.h>
 #include <sections.h>

drivers/timer/cortex_m_systick.c

@@ -37,7 +37,7 @@
  * conjunction with a microkernel.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <toolchain.h>
 #include <sections.h>
 #include <misc/__assert.h>

drivers/timer/hpet.c

@@ -54,7 +54,7 @@
  * microkernel.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <toolchain.h>
 #include <sections.h>
 #include <sys_clock.h>

drivers/timer/loapic_timer.c

@@ -75,7 +75,7 @@
  * @endinternal
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <toolchain.h>
 #include <sections.h>
 #include <sys_clock.h>

drivers/timer/sys_clock_init.c

@@ -28,7 +28,7 @@
  * processing any queued ticks.
  */
 
-#include <nanokernel.h>
+#include <kernel.h>
 #include <init.h>
 #include <drivers/system_timer.h>