michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: boards: Merge HAS_DTS_SPI_PINS with HAS_DTS_SPI

Browse source 
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_PINS and
HAS_DTS_SPI.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit is contained in:
Maureen Helm 2018-10-01 17:08:52 -05:00 • committed by Kumar Gala
commit ad32e3b543
9 changed files with 5 additions and 28 deletions
Download patch file Download diff file Expand all files Collapse all files

1
boards/arm/96b_carbon/Kconfig.board
View file

@ -8,4 +8,3 @@
config BOARD_96B_CARBON config BOARD_96B_CARBON
bool "96Boards Carbon (STM32F401)" bool "96Boards Carbon (STM32F401)"
depends on SOC_STM32F401XE depends on SOC_STM32F401XE
select HAS_DTS_SPI_PINS

1
boards/arm/disco_l475_iot1/Kconfig.board
View file

@ -8,4 +8,3 @@
config BOARD_DISCO_L475_IOT1 config BOARD_DISCO_L475_IOT1
bool "Discovery IoT L475 Development Board" bool "Discovery IoT L475 Development Board"
depends on SOC_STM32L475XG depends on SOC_STM32L475XG
select HAS_DTS_SPI_PINS

1
boards/arm/frdm_k64f/Kconfig.board
View file

@ -3,4 +3,3 @@ config BOARD_FRDM_K64F
bool "Freescale FRDM-K64F" bool "Freescale FRDM-K64F"
depends on SOC_SERIES_KINETIS_K6X depends on SOC_SERIES_KINETIS_K6X
select SOC_PART_NUMBER_MK64FN1M0VLL12 select SOC_PART_NUMBER_MK64FN1M0VLL12
select HAS_DTS_SPI_PINS

1
boards/arm/usb_kw24d512/Kconfig.board
View file

@ -9,4 +9,3 @@ config BOARD_USB_KW24D512
bool "NXP USB-KW24D512" bool "NXP USB-KW24D512"
depends on SOC_SERIES_KINETIS_KWX depends on SOC_SERIES_KINETIS_KWX
select SOC_PART_NUMBER_MKW24D512VHA5 select SOC_PART_NUMBER_MKW24D512VHA5
select HAS_DTS_SPI_PINS

4
drivers/bluetooth/hci/Kconfig
View file

@ -97,7 +97,7 @@ config BT_SPI_BLUENRG
Enable support for devices compatible with the BlueNRG Bluetooth Enable support for devices compatible with the BlueNRG Bluetooth
Stack. Current driver supports: ST BLUENRG-MS. Stack. Current driver supports: ST BLUENRG-MS.
if !HAS_DTS_SPI_PINS if !HAS_DTS_SPI
config BT_SPI_CHIP_SELECT_DEV_NAME config BT_SPI_CHIP_SELECT_DEV_NAME
string "Chip Select (CS) line driver name" string "Chip Select (CS) line driver name"
@ -135,7 +135,7 @@ config BT_SPI_RESET_PIN
help help
This option specifies the Reset line number on the SPI device This option specifies the Reset line number on the SPI device
endif # !HAS_DTS_SPI_PINS endif # !HAS_DTS_SPI
config BT_SPI_MAX_CLK_FREQ config BT_SPI_MAX_CLK_FREQ
int "Maximum clock frequency for the HCI SPI interface" int "Maximum clock frequency for the HCI SPI interface"

6
drivers/ieee802154/Kconfig.mcr20a
View file

@ -42,16 +42,12 @@ config IEEE802154_MCR20A_SPI_SLAVE
This option sets the SPI slave number SPI controller has to switch This option sets the SPI slave number SPI controller has to switch
to when dealing with MCR20A chip. to when dealing with MCR20A chip.
endif # !HAS_DTS_SPI
config IEEE802154_MCR20A_GPIO_SPI_CS config IEEE802154_MCR20A_GPIO_SPI_CS
bool "Manage SPI CS through a GPIO pin" bool "Manage SPI CS through a GPIO pin"
help help
This option is useful if one needs to manage SPI CS through a GPIO This option is useful if one needs to manage SPI CS through a GPIO
pin to by-pass the SPI controller's CS logic. pin to by-pass the SPI controller's CS logic.
if !HAS_DTS_SPI_PINS
config IEEE802154_MCR20A_GPIO_SPI_CS_DRV_NAME config IEEE802154_MCR20A_GPIO_SPI_CS_DRV_NAME
string "GPIO driver's name to use to drive SPI CS through" string "GPIO driver's name to use to drive SPI CS through"
depends on IEEE802154_MCR20A_GPIO_SPI_CS depends on IEEE802154_MCR20A_GPIO_SPI_CS
@ -67,7 +63,7 @@ config IEEE802154_MCR20A_GPIO_SPI_CS_PIN
This option is mandatory to set which GPIO pin to use in order This option is mandatory to set which GPIO pin to use in order
to actually emulate the SPI CS. to actually emulate the SPI CS.
endif # !HAS_DTS_SPI_PINS endif # !HAS_DTS_SPI
if !HAS_DTS_GPIO if !HAS_DTS_GPIO

6
drivers/sensor/adxl372/Kconfig
View file

@ -93,10 +93,6 @@ config ADXL372_SPI_BUS_FREQ
This is the maximum supported SPI bus frequency. The chip supports a This is the maximum supported SPI bus frequency. The chip supports a
frequency up to 10MHz. frequency up to 10MHz.
endif # !HAS_DTS_SPI
if !HAS_DTS_SPI_PINS
config ADXL372_SPI_GPIO_CS_DRV_NAME config ADXL372_SPI_GPIO_CS_DRV_NAME
string "GPIO driver's name to use to drive SPI CS through" string "GPIO driver's name to use to drive SPI CS through"
default "GPIO_0" default "GPIO_0"
@ -113,7 +109,7 @@ config ADXL372_SPI_GPIO_CS_PIN
This option is mandatory to set which GPIO pin to use in order This option is mandatory to set which GPIO pin to use in order
to actually emulate the SPI CS. to actually emulate the SPI CS.
endif # !HAS_DTS_SPI_PINS endif # !HAS_DTS_SPI
choice choice
prompt "Operating mode" prompt "Operating mode"

6
drivers/sensor/lsm6dsl/Kconfig
View file

@ -83,8 +83,6 @@ config LSM6DSL_SPI_MASTER_DEV_NAME
Specify the device name of the spi master device to which LSM6DSL is Specify the device name of the spi master device to which LSM6DSL is
connected. connected.
endif #HAS_DTS_SPI
config LSM6DSL_SPI_GPIO_CS config LSM6DSL_SPI_GPIO_CS
bool "LSM6DSL SPI CS through a GPIO pin" bool "LSM6DSL SPI CS through a GPIO pin"
depends on LSM6DSL_SPI depends on LSM6DSL_SPI
@ -92,8 +90,6 @@ config LSM6DSL_SPI_GPIO_CS
This option is useful if one needs to manage SPI CS through a GPIO This option is useful if one needs to manage SPI CS through a GPIO
pin to by-pass the SPI controller's CS logic. pin to by-pass the SPI controller's CS logic.
if !HAS_DTS_SPI_PINS
config LSM6DSL_SPI_GPIO_CS_DRV_NAME config LSM6DSL_SPI_GPIO_CS_DRV_NAME
string "GPIO driver's name to use to drive SPI CS through" string "GPIO driver's name to use to drive SPI CS through"
default "" default ""
@ -110,7 +106,7 @@ config LSM6DSL_SPI_GPIO_CS_PIN
This option is mandatory to set which GPIO pin to use in order This option is mandatory to set which GPIO pin to use in order
to actually emulate the SPI CS. to actually emulate the SPI CS.
endif # !HAS_DTS_SPI_PINS endif # !HAS_DTS_SPI
choice LSM6DSL_TRIGGER_MODE choice LSM6DSL_TRIGGER_MODE
prompt "Trigger mode" prompt "Trigger mode"

7
dts/Kconfig
View file

@ -32,13 +32,6 @@ config HAS_DTS_SPI
This option specifies that the target platform supports device tree This option specifies that the target platform supports device tree
configuration for SPI. configuration for SPI.
config HAS_DTS_SPI_PINS
bool
help
This option specifies that the target platform supports device tree
configuration for pin definition of spi devices, like sensors or
RF modules.
config HAS_DTS_USB config HAS_DTS_USB
bool bool
depends on HAS_DTS depends on HAS_DTS