michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: bluetooth: hci: Enable SPI_LOCK_ON mode

Browse source 
Use SPI_LOCK_ON to lock configuration for multiple transaction while CS is
kept low.

Change control of CS line from direct GPIO manipulation to SPI driver API.

Signed-off-by: Michele Sardo <msmttchr@gmail.com>
This commit is contained in:
Michele Sardo 2024-03-01 16:32:42 +01:00 • committed by Johan Hedberg
commit aa58fb0f0a
1 changed files with 14 additions and 21 deletions
Download patch file Download diff file Expand all files Collapse all files

35
drivers/bluetooth/hci/hci_spi_st.c
View file

@ -96,7 +96,7 @@ static struct k_thread spi_rx_thread_data;
static int bt_spi_send_aci_config(uint8_t offset, const uint8_t *value, size_t value_len);
static const struct spi_dt_spec bus = SPI_DT_SPEC_INST_GET(
0, SPI_OP_MODE_MASTER | SPI_TRANSFER_MSB | SPI_WORD_SET(8), 0);
0, SPI_OP_MODE_MASTER | SPI_TRANSFER_MSB | SPI_WORD_SET(8) | SPI_LOCK_ON, 0);
static struct spi_buf spi_tx_buf;
static struct spi_buf spi_rx_buf;
@ -171,16 +171,10 @@ static bool bt_spi_handle_vendor_evt(uint8_t *msg)
/* as long as IRQ pin is high */
#define READ_CONDITION IS_IRQ_HIGH
static void assert_cs(void)
{
gpio_pin_set_dt(&bus.config.cs.gpio, 0);
gpio_pin_set_dt(&bus.config.cs.gpio, 1);
}
static void release_cs(bool data_transaction)
{
ARG_UNUSED(data_transaction);
gpio_pin_set_dt(&bus.config.cs.gpio, 0);
spi_release_dt(&bus);
}
static int bt_spi_get_header(uint8_t op, uint16_t *size)
@ -210,7 +204,8 @@ static int bt_spi_get_header(uint8_t op, uint16_t *size)
return 0;
}
}
assert_cs();
/* Make sure CS is raised before a new attempt */
gpio_pin_set_dt(&bus.config.cs.gpio, 0);
ret = bt_spi_transceive(header_master, 5, header_slave, 5);
if (ret) {
/* SPI transaction failed */
@ -229,16 +224,6 @@ static int bt_spi_get_header(uint8_t op, uint16_t *size)
#define READ_CONDITION false
static void assert_cs(uint16_t delay)
{
gpio_pin_set_dt(&bus.config.cs.gpio, 0);
if (delay) {
k_sleep(K_USEC(delay));
}
gpio_pin_set_dt(&bus.config.cs.gpio, 1);
gpio_pin_interrupt_configure_dt(&irq_gpio, GPIO_INT_DISABLE);
}
static void release_cs(bool data_transaction)
{
/* Consume possible event signals */
@ -250,7 +235,7 @@ static void release_cs(bool data_transaction)
}
}
gpio_pin_interrupt_configure_dt(&irq_gpio, GPIO_INT_EDGE_TO_ACTIVE);
gpio_pin_set_dt(&bus.config.cs.gpio, 0);
spi_release_dt(&bus);
}
static int bt_spi_get_header(uint8_t op, uint16_t *size)
@ -276,7 +261,15 @@ static int bt_spi_get_header(uint8_t op, uint16_t *size)
return -EINVAL;
}
assert_cs(cs_delay);
if (cs_delay) {
k_sleep(K_USEC(cs_delay));
}
/* Perform a zero byte SPI transaction to acquire the SPI lock and lower CS
* while waiting for IRQ to be raised
*/
bt_spi_transceive(header_master, 0, header_slave, 0);
gpio_pin_interrupt_configure_dt(&irq_gpio, GPIO_INT_DISABLE);
/* Wait up to a maximum time of 100 ms */
if (!WAIT_FOR(IS_IRQ_HIGH, 100000, k_usleep(100))) {
LOG_ERR("IRQ pin did not raise");