michaelh/zephyr
1
0
Fork 0
Code Releases Activity

ethernet: enc28j60: convert to _dt_spec

Browse source 
Convert enc28j60 ethernet driver to `spi_dt_spect` and `gpio_dt_spec`.

Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit is contained in:
Jordan Yates 2021-08-04 22:56:51 +10:00 • committed by Christopher Friedt
commit a94cfb42a3
2 changed files with 35 additions and 75 deletions
Download patch file Download diff file Expand all files Collapse all files

94
drivers/ethernet/eth_enc28j60.c
View file

@ -30,7 +30,7 @@ LOG_MODULE_REGISTER(LOG_MODULE_NAME);
static int eth_enc28j60_soft_reset(const struct device *dev)
{
struct eth_enc28j60_runtime *context = dev->data;
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[2] = { ENC28J60_SPI_SC, 0xFF };
const struct spi_buf tx_buf = {
.buf = buf,
@ -41,12 +41,12 @@ static int eth_enc28j60_soft_reset(const struct device *dev)
.count = 1
};
return spi_write(context->spi, &context->spi_cfg, &tx);
return spi_write_dt(&config->spi, &tx);
}
static void eth_enc28j60_set_bank(const struct device *dev, uint16_t reg_addr)
{
struct eth_enc28j60_runtime *context = dev->data;
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[2];
const struct spi_buf tx_buf = {
.buf = buf,
@ -68,11 +68,11 @@ static void eth_enc28j60_set_bank(const struct device *dev, uint16_t reg_addr)
buf[0] = ENC28J60_SPI_RCR | ENC28J60_REG_ECON1;
buf[1] = 0x0;
if (!spi_transceive(context->spi, &context->spi_cfg, &tx, &rx)) {
if (!spi_transceive_dt(&config->spi, &tx, &rx)) {
buf[0] = ENC28J60_SPI_WCR | ENC28J60_REG_ECON1;
buf[1] = (buf[1] & 0xFC) | ((reg_addr >> 8) & 0x0F);
spi_write(context->spi, &context->spi_cfg, &tx);
spi_write_dt(&config->spi, &tx);
} else {
LOG_DBG("Failure while setting bank to 0x%04x", reg_addr);
}
@ -82,7 +82,7 @@ static void eth_enc28j60_write_reg(const struct device *dev,
uint16_t reg_addr,
uint8_t value)
{
struct eth_enc28j60_runtime *context = dev->data;
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[2];
const struct spi_buf tx_buf = {
.buf = buf,
@ -96,13 +96,13 @@ static void eth_enc28j60_write_reg(const struct device *dev,
buf[0] = ENC28J60_SPI_WCR | (reg_addr & 0xFF);
buf[1] = value;
spi_write(context->spi, &context->spi_cfg, &tx);
spi_write_dt(&config->spi, &tx);
}
static void eth_enc28j60_read_reg(const struct device *dev, uint16_t reg_addr,
uint8_t *value)
{
struct eth_enc28j60_runtime *context = dev->data;
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[3];
const struct spi_buf tx_buf = {
.buf = buf,
@ -130,7 +130,7 @@ static void eth_enc28j60_read_reg(const struct device *dev, uint16_t reg_addr,
buf[0] = ENC28J60_SPI_RCR | (reg_addr & 0xFF);
buf[1] = 0x0;
if (!spi_transceive(context->spi, &context->spi_cfg, &tx, &rx)) {
if (!spi_transceive_dt(&config->spi, &tx, &rx)) {
*value = buf[rx_size - 1];
} else {
LOG_DBG("Failure while reading register 0x%04x", reg_addr);
@ -142,7 +142,7 @@ static void eth_enc28j60_set_eth_reg(const struct device *dev,
uint16_t reg_addr,
uint8_t value)
{
struct eth_enc28j60_runtime *context = dev->data;
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[2];
const struct spi_buf tx_buf = {
.buf = buf,
@ -156,7 +156,7 @@ static void eth_enc28j60_set_eth_reg(const struct device *dev,
buf[0] = ENC28J60_SPI_BFS | (reg_addr & 0xFF);
buf[1] = value;
spi_write(context->spi, &context->spi_cfg, &tx);
spi_write_dt(&config->spi, &tx);
}
@ -164,7 +164,7 @@ static void eth_enc28j60_clear_eth_reg(const struct device *dev,
uint16_t reg_addr,
uint8_t value)
{
struct eth_enc28j60_runtime *context = dev->data;
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[2];
const struct spi_buf tx_buf = {
.buf = buf,
@ -178,14 +178,14 @@ static void eth_enc28j60_clear_eth_reg(const struct device *dev,
buf[0] = ENC28J60_SPI_BFC | (reg_addr & 0xFF);
buf[1] = value;
spi_write(context->spi, &context->spi_cfg, &tx);
spi_write_dt(&config->spi, &tx);
}
static void eth_enc28j60_write_mem(const struct device *dev,
uint8_t *data_buffer,
uint16_t buf_len)
{
struct eth_enc28j60_runtime *context = dev->data;
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[1] = { ENC28J60_SPI_WBM };
struct spi_buf tx_buf[2] = {
{
@ -208,7 +208,7 @@ static void eth_enc28j60_write_mem(const struct device *dev,
tx_buf[1].buf = data_buffer;
tx_buf[1].len = MAX_BUFFER_LENGTH;
if (spi_write(context->spi, &context->spi_cfg, &tx)) {
if (spi_write_dt(&config->spi, &tx)) {
LOG_ERR("Failed to write memory");
return;
}
@ -218,7 +218,7 @@ static void eth_enc28j60_write_mem(const struct device *dev,
tx_buf[1].buf = data_buffer;
tx_buf[1].len = num_remaining;
if (spi_write(context->spi, &context->spi_cfg, &tx)) {
if (spi_write_dt(&config->spi, &tx)) {
LOG_ERR("Failed to write memory");
}
}
@ -228,7 +228,7 @@ static void eth_enc28j60_read_mem(const struct device *dev,
uint8_t *data_buffer,
uint16_t buf_len)
{
struct eth_enc28j60_runtime *context = dev->data;
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[1] = { ENC28J60_SPI_RBM };
const struct spi_buf tx_buf = {
.buf = buf,
@ -260,7 +260,7 @@ static void eth_enc28j60_read_mem(const struct device *dev,
rx_buf[1].buf = data_buffer;
rx_buf[1].len = MAX_BUFFER_LENGTH;
if (spi_transceive(context->spi, &context->spi_cfg, &tx, &rx)) {
if (spi_transceive_dt(&config->spi, &tx, &rx)) {
LOG_ERR("Failed to read memory");
return;
}
@ -270,7 +270,7 @@ static void eth_enc28j60_read_mem(const struct device *dev,
rx_buf[1].buf = data_buffer;
rx_buf[1].len = num_remaining;
if (spi_transceive(context->spi, &context->spi_cfg, &tx, &rx)) {
if (spi_transceive_dt(&config->spi, &tx, &rx)) {
LOG_ERR("Failed to read memory");
}
}
@ -734,53 +734,32 @@ static int eth_enc28j60_init(const struct device *dev)
struct eth_enc28j60_runtime *context = dev->data;
/* SPI config */
context->spi_cfg.operation = SPI_WORD_SET(8);
context->spi_cfg.frequency = config->spi_freq;
context->spi_cfg.slave = config->spi_slave;
context->spi = device_get_binding((char *)config->spi_port);
if (!context->spi) {
LOG_ERR("SPI master port %s not found", config->spi_port);
if (!spi_is_ready(&config->spi)) {
LOG_ERR("SPI master port %s not ready", config->spi.bus->name);
return -EINVAL;
}
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
context->spi_cs.gpio_dev =
device_get_binding((char *)config->spi_cs_port);
if (!context->spi_cs.gpio_dev) {
LOG_ERR("SPI CS port %s not found", config->spi_cs_port);
return -EINVAL;
}
context->spi_cs.gpio_pin = config->spi_cs_pin;
context->spi_cs.gpio_dt_flags = config->spi_cs_dt_flags;
context->spi_cfg.cs = &context->spi_cs;
#endif
/* Initialize GPIO */
context->gpio = device_get_binding((char *)config->gpio_port);
if (!context->gpio) {
LOG_ERR("GPIO port %s not found", config->gpio_port);
if (!device_is_ready(config->interrupt.port)) {
LOG_ERR("GPIO port %s not ready", config->interrupt.port->name);
return -EINVAL;
}
if (gpio_pin_configure(context->gpio, config->gpio_pin,
GPIO_INPUT | config->gpio_flags)) {
LOG_ERR("Unable to configure GPIO pin %u", config->gpio_pin);
if (gpio_pin_configure_dt(&config->interrupt, GPIO_INPUT)) {
LOG_ERR("Unable to configure GPIO pin %u",
config->interrupt.pin);
return -EINVAL;
}
gpio_init_callback(&(context->gpio_cb), eth_enc28j60_gpio_callback,
BIT(config->gpio_pin));
BIT(config->interrupt.pin));
if (gpio_add_callback(context->gpio, &(context->gpio_cb))) {
if (gpio_add_callback(config->interrupt.port, &(context->gpio_cb))) {
return -EINVAL;
}
gpio_pin_interrupt_configure(context->gpio,
config->gpio_pin,
GPIO_INT_EDGE_TO_ACTIVE);
gpio_pin_interrupt_configure_dt(&config->interrupt,
GPIO_INT_EDGE_TO_ACTIVE);
if (eth_enc28j60_soft_reset(dev)) {
LOG_ERR("Soft-reset failed");
@ -831,17 +810,8 @@ static struct eth_enc28j60_runtime eth_enc28j60_0_runtime = {
};
static const struct eth_enc28j60_config eth_enc28j60_0_config = {
.gpio_port = DT_INST_GPIO_LABEL(0, int_gpios),
.gpio_pin = DT_INST_GPIO_PIN(0, int_gpios),
.gpio_flags = DT_INST_GPIO_FLAGS(0, int_gpios),
.spi_port = DT_INST_BUS_LABEL(0),
.spi_freq = DT_INST_PROP(0, spi_max_frequency),
.spi_slave = DT_INST_REG_ADDR(0),
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
.spi_cs_port = DT_INST_SPI_DEV_CS_GPIOS_LABEL(0),
.spi_cs_pin = DT_INST_SPI_DEV_CS_GPIOS_PIN(0),
.spi_cs_dt_flags = DT_INST_SPI_DEV_CS_GPIOS_FLAGS(0),
#endif
.spi = SPI_DT_SPEC_INST_GET(0, SPI_WORD_SET(8), 0),
.interrupt = GPIO_DT_SPEC_INST_GET(0, int_gpios),
.full_duplex = IS_ENABLED(CONFIG_ETH_ENC28J60_0_FULL_DUPLEX),
.timeout = CONFIG_ETH_ENC28J60_TIMEOUT,
};

16
drivers/ethernet/eth_enc28j60_priv.h
View file

@ -7,6 +7,7 @@
#include <kernel.h>
#include <drivers/gpio.h>
#include <drivers/spi.h>
#ifndef _ENC28J60_
#define _ENC28J60_
@ -214,15 +215,8 @@
#define MAX_BUFFER_LENGTH 128
struct eth_enc28j60_config {
const char *gpio_port;
uint8_t gpio_pin;
gpio_dt_flags_t gpio_flags;
const char *spi_port;
gpio_pin_t spi_cs_pin;
gpio_dt_flags_t spi_cs_dt_flags;
const char *spi_cs_port;
uint32_t spi_freq;
uint8_t spi_slave;
struct spi_dt_spec spi;
struct gpio_dt_spec interrupt;
uint8_t full_duplex;
int32_t timeout;
};
@ -233,10 +227,6 @@ struct eth_enc28j60_runtime {
CONFIG_ETH_ENC28J60_RX_THREAD_STACK_SIZE);
struct k_thread thread;
uint8_t mac_address[6];
const struct device *gpio;
const struct device *spi;
struct spi_cs_control spi_cs;
struct spi_config spi_cfg;
struct gpio_callback gpio_cb;
struct k_sem tx_rx_sem;
struct k_sem int_sem;