drivers: pinctrl: rename S32 to NXP S32
Following updates previously done for other drivers, rename all occurrences of S32 to NXP S32 to avoid ambiguity. Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
This commit is contained in:
Manuel Arguelles
Carles Cufí
parent
415131c2e4
commit
a7743a49aa
8 changed files with 114 additions and 114 deletions
|
|
@ -26,5 +26,5 @@ zephyr_library_sources_ifdef(CONFIG_PINCTRL_RV32M1 pinctrl_rv32m1.c)
|
|||
zephyr_library_sources_ifdef(CONFIG_PINCTRL_XLNX_ZYNQ pinctrl_xlnx_zynq.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_PINCTRL_SMARTBOND pinctrl_smartbond.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_PINCTRL_XMC4XXX pinctrl_xmc4xxx.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_PINCTRL_S32 pinctrl_s32.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_PINCTRL_NXP_S32 pinctrl_nxp_s32.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_PINCTRL_GECKO pinctrl_gecko.c)
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ source "drivers/pinctrl/Kconfig.rv32m1"
|
|||
source "drivers/pinctrl/Kconfig.xlnx"
|
||||
source "drivers/pinctrl/Kconfig.smartbond"
|
||||
source "drivers/pinctrl/Kconfig.xmc4xxx"
|
||||
source "drivers/pinctrl/Kconfig.s32"
|
||||
source "drivers/pinctrl/Kconfig.nxp_s32"
|
||||
source "drivers/pinctrl/Kconfig.gecko"
|
||||
|
||||
endif # PINCTRL
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
# Copyright 2022 NXP
|
||||
# SPDX-License-Identifier: Apache-2.0
|
||||
|
||||
config PINCTRL_S32
|
||||
config PINCTRL_NXP_S32
|
||||
bool "Pin controller driver for NXP S32 processors"
|
||||
default y
|
||||
depends on DT_HAS_NXP_S32ZE_PINCTRL_ENABLED
|
||||
77
include/zephyr/dt-bindings/pinctrl/nxp-s32-pinctrl.h
Normal file
77
include/zephyr/dt-bindings/pinctrl/nxp-s32-pinctrl.h
Normal file
|
|
@ -0,0 +1,77 @@
|
|||
/*
|
||||
* Copyright 2022 NXP
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
|
||||
#ifndef ZEPHYR_INCLUDE_DT_BINDINGS_PINCTRL_NXP_S32_PINCTRL_H_
|
||||
#define ZEPHYR_INCLUDE_DT_BINDINGS_PINCTRL_NXP_S32_PINCTRL_H_
|
||||
|
||||
#include <zephyr/sys/util_macro.h>
|
||||
|
||||
/*
|
||||
* The NXP S32 pinmux configuration is encoded in a 32-bit field value as follows:
|
||||
*
|
||||
* - 0..2: Output mux Source Signal Selection (MSCR.SSS)
|
||||
* - 3..6: Input mux Source Signal Selection (IMCR.SSS)
|
||||
* - 7..15: Input Multiplexed Signal Configuration Register (IMCR) index
|
||||
* - 16..24: Multiplexed Signal Configuration Register (MSCR) index
|
||||
* - 25..27: SIUL2 instance index (0..7)
|
||||
* - 28..31: Reserved for future use
|
||||
*/
|
||||
#define NXP_S32_MSCR_SSS_SHIFT 0U
|
||||
#define NXP_S32_MSCR_SSS_MASK BIT_MASK(3)
|
||||
#define NXP_S32_IMCR_SSS_SHIFT 3U
|
||||
#define NXP_S32_IMCR_SSS_MASK BIT_MASK(4)
|
||||
#define NXP_S32_IMCR_IDX_SHIFT 7U
|
||||
#define NXP_S32_IMCR_IDX_MASK BIT_MASK(9)
|
||||
#define NXP_S32_MSCR_IDX_SHIFT 16U
|
||||
#define NXP_S32_MSCR_IDX_MASK BIT_MASK(9)
|
||||
#define NXP_S32_SIUL2_IDX_SHIFT 25U
|
||||
#define NXP_S32_SIUL2_IDX_MASK BIT_MASK(3)
|
||||
|
||||
#define NXP_S32_PINMUX_MSCR_SSS(cfg) \
|
||||
(((cfg) & NXP_S32_MSCR_SSS_MASK) << NXP_S32_MSCR_SSS_SHIFT)
|
||||
|
||||
#define NXP_S32_PINMUX_IMCR_SSS(cfg) \
|
||||
(((cfg) & NXP_S32_IMCR_SSS_MASK) << NXP_S32_IMCR_SSS_SHIFT)
|
||||
|
||||
#define NXP_S32_PINMUX_IMCR_IDX(cfg) \
|
||||
(((cfg) & NXP_S32_IMCR_IDX_MASK) << NXP_S32_IMCR_IDX_SHIFT)
|
||||
|
||||
#define NXP_S32_PINMUX_MSCR_IDX(cfg) \
|
||||
(((cfg) & NXP_S32_MSCR_IDX_MASK) << NXP_S32_MSCR_IDX_SHIFT)
|
||||
|
||||
#define NXP_S32_PINMUX_SIUL2_IDX(cfg) \
|
||||
(((cfg) & NXP_S32_SIUL2_IDX_MASK) << NXP_S32_SIUL2_IDX_SHIFT)
|
||||
|
||||
#define NXP_S32_PINMUX_GET_MSCR_SSS(cfg) \
|
||||
(((cfg) >> NXP_S32_MSCR_SSS_SHIFT) & NXP_S32_MSCR_SSS_MASK)
|
||||
|
||||
#define NXP_S32_PINMUX_GET_IMCR_SSS(cfg) \
|
||||
(((cfg) >> NXP_S32_IMCR_SSS_SHIFT) & NXP_S32_IMCR_SSS_MASK)
|
||||
|
||||
#define NXP_S32_PINMUX_GET_IMCR_IDX(cfg) \
|
||||
(((cfg) >> NXP_S32_IMCR_IDX_SHIFT) & NXP_S32_IMCR_IDX_MASK)
|
||||
|
||||
#define NXP_S32_PINMUX_GET_MSCR_IDX(cfg) \
|
||||
(((cfg) >> NXP_S32_MSCR_IDX_SHIFT) & NXP_S32_MSCR_IDX_MASK)
|
||||
|
||||
#define NXP_S32_PINMUX_GET_SIUL2_IDX(cfg) \
|
||||
(((cfg) >> NXP_S32_SIUL2_IDX_SHIFT) & NXP_S32_SIUL2_IDX_MASK)
|
||||
|
||||
/**
|
||||
* @brief Utility macro to build NXP S32 pinmux property for pinctrl nodes.
|
||||
*
|
||||
* @param siul2_idx SIUL2 instance index
|
||||
* @param mscr_idx Multiplexed Signal Configuration Register (MSCR) index
|
||||
* @param mscr_sss Output mux Source Signal Selection (MSCR.SSS)
|
||||
* @param imcr_idx Input Multiplexed Signal Configuration Register (IMCR) index
|
||||
* @param imcr_sss Input mux Source Signal Selection (IMCR.SSS)
|
||||
*/
|
||||
#define NXP_S32_PINMUX(siul2_idx, mscr_idx, mscr_sss, imcr_idx, imcr_sss) \
|
||||
(NXP_S32_PINMUX_SIUL2_IDX(siul2_idx) | NXP_S32_PINMUX_MSCR_IDX(mscr_idx) \
|
||||
| NXP_S32_PINMUX_MSCR_SSS(mscr_sss) | NXP_S32_PINMUX_IMCR_IDX(imcr_idx) \
|
||||
| NXP_S32_PINMUX_IMCR_SSS(imcr_sss))
|
||||
|
||||
#endif /* ZEPHYR_INCLUDE_DT_BINDINGS_PINCTRL_NXP_NXP_S32_PINCTRL_H_ */
|
||||
|
|
@ -1,77 +0,0 @@
|
|||
/*
|
||||
* Copyright 2022 NXP
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
|
||||
#ifndef ZEPHYR_INCLUDE_DT_BINDINGS_PINCTRL_S32_PINCTRL_H_
|
||||
#define ZEPHYR_INCLUDE_DT_BINDINGS_PINCTRL_S32_PINCTRL_H_
|
||||
|
||||
#include <zephyr/sys/util_macro.h>
|
||||
|
||||
/*
|
||||
* The NXP S32 pinmux configuration is encoded in a 32-bit field value as follows:
|
||||
*
|
||||
* - 0..2: Output mux Source Signal Selection (MSCR.SSS)
|
||||
* - 3..6: Input mux Source Signal Selection (IMCR.SSS)
|
||||
* - 7..15: Input Multiplexed Signal Configuration Register (IMCR) index
|
||||
* - 16..24: Multiplexed Signal Configuration Register (MSCR) index
|
||||
* - 25..27: SIUL2 instance index (0..7)
|
||||
* - 28..31: Reserved for future use
|
||||
*/
|
||||
#define S32_MSCR_SSS_SHIFT 0U
|
||||
#define S32_MSCR_SSS_MASK BIT_MASK(3)
|
||||
#define S32_IMCR_SSS_SHIFT 3U
|
||||
#define S32_IMCR_SSS_MASK BIT_MASK(4)
|
||||
#define S32_IMCR_IDX_SHIFT 7U
|
||||
#define S32_IMCR_IDX_MASK BIT_MASK(9)
|
||||
#define S32_MSCR_IDX_SHIFT 16U
|
||||
#define S32_MSCR_IDX_MASK BIT_MASK(9)
|
||||
#define S32_SIUL2_IDX_SHIFT 25U
|
||||
#define S32_SIUL2_IDX_MASK BIT_MASK(3)
|
||||
|
||||
#define S32_PINMUX_MSCR_SSS(cfg) \
|
||||
(((cfg) & S32_MSCR_SSS_MASK) << S32_MSCR_SSS_SHIFT)
|
||||
|
||||
#define S32_PINMUX_IMCR_SSS(cfg) \
|
||||
(((cfg) & S32_IMCR_SSS_MASK) << S32_IMCR_SSS_SHIFT)
|
||||
|
||||
#define S32_PINMUX_IMCR_IDX(cfg) \
|
||||
(((cfg) & S32_IMCR_IDX_MASK) << S32_IMCR_IDX_SHIFT)
|
||||
|
||||
#define S32_PINMUX_MSCR_IDX(cfg) \
|
||||
(((cfg) & S32_MSCR_IDX_MASK) << S32_MSCR_IDX_SHIFT)
|
||||
|
||||
#define S32_PINMUX_SIUL2_IDX(cfg) \
|
||||
(((cfg) & S32_SIUL2_IDX_MASK) << S32_SIUL2_IDX_SHIFT)
|
||||
|
||||
#define S32_PINMUX_GET_MSCR_SSS(cfg) \
|
||||
(((cfg) >> S32_MSCR_SSS_SHIFT) & S32_MSCR_SSS_MASK)
|
||||
|
||||
#define S32_PINMUX_GET_IMCR_SSS(cfg) \
|
||||
(((cfg) >> S32_IMCR_SSS_SHIFT) & S32_IMCR_SSS_MASK)
|
||||
|
||||
#define S32_PINMUX_GET_IMCR_IDX(cfg) \
|
||||
(((cfg) >> S32_IMCR_IDX_SHIFT) & S32_IMCR_IDX_MASK)
|
||||
|
||||
#define S32_PINMUX_GET_MSCR_IDX(cfg) \
|
||||
(((cfg) >> S32_MSCR_IDX_SHIFT) & S32_MSCR_IDX_MASK)
|
||||
|
||||
#define S32_PINMUX_GET_SIUL2_IDX(cfg) \
|
||||
(((cfg) >> S32_SIUL2_IDX_SHIFT) & S32_SIUL2_IDX_MASK)
|
||||
|
||||
/**
|
||||
* @brief Utility macro to build NXP S32 pinmux property for pinctrl nodes.
|
||||
*
|
||||
* @param siul2_idx SIUL2 instance index
|
||||
* @param mscr_idx Multiplexed Signal Configuration Register (MSCR) index
|
||||
* @param mscr_sss Output mux Source Signal Selection (MSCR.SSS)
|
||||
* @param imcr_idx Input Multiplexed Signal Configuration Register (IMCR) index
|
||||
* @param imcr_sss Input mux Source Signal Selection (IMCR.SSS)
|
||||
*/
|
||||
#define S32_PINMUX(siul2_idx, mscr_idx, mscr_sss, imcr_idx, imcr_sss) \
|
||||
(S32_PINMUX_SIUL2_IDX(siul2_idx) | S32_PINMUX_MSCR_IDX(mscr_idx) \
|
||||
| S32_PINMUX_MSCR_SSS(mscr_sss) | S32_PINMUX_IMCR_IDX(imcr_idx) \
|
||||
| S32_PINMUX_IMCR_SSS(imcr_sss))
|
||||
|
||||
#endif /* ZEPHYR_INCLUDE_DT_BINDINGS_PINCTRL_S32_PINCTRL_H_ */
|
||||
|
|
@ -8,7 +8,7 @@
|
|||
#define ZEPHYR_SOC_ARM_NXP_S32_COMMON_PINCTRL_SOC_COMMON_H_
|
||||
|
||||
#include <zephyr/devicetree.h>
|
||||
#include <zephyr/dt-bindings/pinctrl/s32-pinctrl.h>
|
||||
#include <zephyr/dt-bindings/pinctrl/nxp-s32-pinctrl.h>
|
||||
#include <zephyr/sys/util_macro.h>
|
||||
#include <zephyr/types.h>
|
||||
|
||||
|
|
@ -22,11 +22,11 @@
|
|||
* Each SoC implementing Pinctrl must create a "pinctrl_soc.h" which includes
|
||||
* this file and defines the following macros:
|
||||
*
|
||||
* - S32_PIN_OPTIONS_INIT(group, mux)
|
||||
* - NXP_S32_PIN_OPTIONS_INIT(group, mux)
|
||||
* Populates SoC members of Siul2_Port_Ip_PinSettingsConfig struct based on
|
||||
* SoC-specific group properties and the pinmux configuration.
|
||||
*
|
||||
* - S32_SIUL2_IDX(n)
|
||||
* - NXP_S32_SIUL2_IDX(n)
|
||||
* Expands to the SIUL2 struct pointer for the instance "n". The number of
|
||||
* instances is SoC specific and may be not contiguous.
|
||||
* Note: "n" may be a preprocessor expression so cannot be concatenated.
|
||||
|
|
@ -35,40 +35,40 @@
|
|||
/** @brief Type for NXP S32 pin configuration. */
|
||||
typedef Siul2_Port_Ip_PinSettingsConfig pinctrl_soc_pin_t;
|
||||
|
||||
#define S32_INPUT_BUFFER(group) \
|
||||
#define NXP_S32_INPUT_BUFFER(group) \
|
||||
COND_CODE_1(DT_PROP(group, input_enable), (PORT_INPUT_BUFFER_ENABLED), \
|
||||
(PORT_INPUT_BUFFER_DISABLED))
|
||||
|
||||
#define S32_OUTPUT_BUFFER(group) \
|
||||
#define NXP_S32_OUTPUT_BUFFER(group) \
|
||||
COND_CODE_1(DT_PROP(group, output_enable), (PORT_OUTPUT_BUFFER_ENABLED),\
|
||||
(PORT_OUTPUT_BUFFER_DISABLED))
|
||||
|
||||
#define S32_INPUT_MUX_REG(group, val) \
|
||||
COND_CODE_1(DT_PROP(group, input_enable), (S32_PINMUX_GET_IMCR_IDX(val)),\
|
||||
#define NXP_S32_INPUT_MUX_REG(group, val) \
|
||||
COND_CODE_1(DT_PROP(group, input_enable), (NXP_S32_PINMUX_GET_IMCR_IDX(val)), \
|
||||
(0U))
|
||||
|
||||
#define S32_INPUT_MUX(group, val) \
|
||||
#define NXP_S32_INPUT_MUX(group, val) \
|
||||
COND_CODE_1(DT_PROP(group, input_enable), \
|
||||
((Siul2_Port_Ip_PortInputMux)S32_PINMUX_GET_IMCR_SSS(val)), \
|
||||
((Siul2_Port_Ip_PortInputMux)NXP_S32_PINMUX_GET_IMCR_SSS(val)), \
|
||||
(PORT_INPUT_MUX_NO_INIT))
|
||||
|
||||
/* Only a single input mux is configured, the rest is not used */
|
||||
#define S32_INPUT_MUX_NO_INIT \
|
||||
#define NXP_S32_INPUT_MUX_NO_INIT \
|
||||
[1 ... (FEATURE_SIUL2_MAX_NUMBER_OF_INPUT-1)] = PORT_INPUT_MUX_NO_INIT
|
||||
|
||||
#define S32_PINMUX_INIT(group, val) \
|
||||
.base = S32_SIUL2_IDX(S32_PINMUX_GET_SIUL2_IDX(val)), \
|
||||
.pinPortIdx = S32_PINMUX_GET_MSCR_IDX(val), \
|
||||
.mux = (Siul2_Port_Ip_PortMux)S32_PINMUX_GET_MSCR_SSS(val), \
|
||||
#define NXP_S32_PINMUX_INIT(group, val) \
|
||||
.base = NXP_S32_SIUL2_IDX(NXP_S32_PINMUX_GET_SIUL2_IDX(val)), \
|
||||
.pinPortIdx = NXP_S32_PINMUX_GET_MSCR_IDX(val), \
|
||||
.mux = (Siul2_Port_Ip_PortMux)NXP_S32_PINMUX_GET_MSCR_SSS(val), \
|
||||
.inputMux = { \
|
||||
S32_INPUT_MUX(group, val), \
|
||||
S32_INPUT_MUX_NO_INIT \
|
||||
NXP_S32_INPUT_MUX(group, val), \
|
||||
NXP_S32_INPUT_MUX_NO_INIT \
|
||||
}, \
|
||||
.inputMuxReg = { \
|
||||
S32_INPUT_MUX_REG(group, val) \
|
||||
NXP_S32_INPUT_MUX_REG(group, val) \
|
||||
}, \
|
||||
.inputBuffer = S32_INPUT_BUFFER(group), \
|
||||
.outputBuffer = S32_OUTPUT_BUFFER(group),
|
||||
.inputBuffer = NXP_S32_INPUT_BUFFER(group), \
|
||||
.outputBuffer = NXP_S32_OUTPUT_BUFFER(group),
|
||||
|
||||
/**
|
||||
* @brief Utility macro to initialize each pin.
|
||||
|
|
@ -78,10 +78,10 @@ typedef Siul2_Port_Ip_PinSettingsConfig pinctrl_soc_pin_t;
|
|||
* @param prop Property name.
|
||||
* @param idx Property entry index.
|
||||
*/
|
||||
#define Z_PINCTRL_STATE_PIN_INIT(group, prop, idx) \
|
||||
{ \
|
||||
S32_PINMUX_INIT(group, DT_PROP_BY_IDX(group, prop, idx)) \
|
||||
S32_PIN_OPTIONS_INIT(group, DT_PROP_BY_IDX(group, prop, idx)) \
|
||||
#define Z_PINCTRL_STATE_PIN_INIT(group, prop, idx) \
|
||||
{ \
|
||||
NXP_S32_PINMUX_INIT(group, DT_PROP_BY_IDX(group, prop, idx)) \
|
||||
NXP_S32_PIN_OPTIONS_INIT(group, DT_PROP_BY_IDX(group, prop, idx)) \
|
||||
},
|
||||
|
||||
/**
|
||||
|
|
@ -97,4 +97,4 @@ typedef Siul2_Port_Ip_PinSettingsConfig pinctrl_soc_pin_t;
|
|||
|
||||
/** @endcond */
|
||||
|
||||
#endif /* ZEPHYR_SOC_ARM_NXP_S32_COMMON_PINCTRL_SOC_COMMON_H_ */
|
||||
#endif /* ZEPHYR_SOC_ARM_NXP_NXP_S32_COMMON_PINCTRL_SOC_COMMON_H_ */
|
||||
|
|
|
|||
|
|
@ -15,22 +15,22 @@
|
|||
#error "SoC not supported"
|
||||
#endif
|
||||
|
||||
#define S32_SIUL2_IDX(n) \
|
||||
#define NXP_S32_SIUL2_IDX(n) \
|
||||
n == 0 ? IP_SIUL2_0 : (n == 1 ? IP_SIUL2_1 : ( \
|
||||
n == 3 ? IP_SIUL2_3 : (n == 4 ? IP_SIUL2_4 : ( \
|
||||
n == 5 ? IP_SIUL2_5 : (NULL)))))
|
||||
|
||||
#define S32_PULL_SEL(group) \
|
||||
COND_CODE_1(DT_PROP(group, bias_pull_up), (PORT_INTERNAL_PULL_UP_ENABLED),\
|
||||
(COND_CODE_1(DT_PROP(group, bias_pull_down), \
|
||||
#define NXP_S32_PULL_SEL(group) \
|
||||
COND_CODE_1(DT_PROP(group, bias_pull_up), (PORT_INTERNAL_PULL_UP_ENABLED), \
|
||||
(COND_CODE_1(DT_PROP(group, bias_pull_down), \
|
||||
(PORT_INTERNAL_PULL_DOWN_ENABLED), (PORT_INTERNAL_PULL_NOT_ENABLED))))
|
||||
|
||||
/* To enable open drain both OBE and ODE bits need to be set */
|
||||
#define S32_OPEN_DRAIN(group) \
|
||||
#define NXP_S32_OPEN_DRAIN(group) \
|
||||
DT_PROP(group, drive_open_drain) && DT_PROP(group, output_enable) ? \
|
||||
(PORT_OPEN_DRAIN_ENABLED) : (PORT_OPEN_DRAIN_DISABLED)
|
||||
|
||||
#define S32_SLEW_RATE(group) \
|
||||
#define NXP_S32_SLEW_RATE(group) \
|
||||
COND_CODE_1(DT_NODE_HAS_PROP(group, slew_rate), \
|
||||
(UTIL_CAT(PORT_SLEW_RATE_CONTROL, DT_PROP(group, slew_rate))), \
|
||||
(PORT_SLEW_RATE_CONTROL0))
|
||||
|
|
@ -39,10 +39,10 @@
|
|||
* The default values are reset values and don't apply to the type of pads
|
||||
* currently supported.
|
||||
*/
|
||||
#define S32_PIN_OPTIONS_INIT(group, mux) \
|
||||
.pullConfig = S32_PULL_SEL(group), \
|
||||
.openDrain = S32_OPEN_DRAIN(group), \
|
||||
.slewRateCtrlSel = S32_SLEW_RATE(group), \
|
||||
#define NXP_S32_PIN_OPTIONS_INIT(group, mux) \
|
||||
.pullConfig = NXP_S32_PULL_SEL(group), \
|
||||
.openDrain = NXP_S32_OPEN_DRAIN(group), \
|
||||
.slewRateCtrlSel = NXP_S32_SLEW_RATE(group), \
|
||||
.terminationResistor = PORT_TERMINATION_RESISTOR_DISABLED, \
|
||||
.receiverSel = PORT_RECEIVER_ENABLE_SINGLE_ENDED, \
|
||||
.currentReferenceControl = PORT_CURRENT_REFERENCE_CONTROL_DISABLED, \
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue