west.yml: update hal_espressif to latest version

- Update GDMA and ADC drivers and remove deprecated entries.
- Rebased hal_espressif to latest bump sync.
- Added ESP Timer and Radio common config values

Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>

drivers/adc/adc_esp32.c

@@ -41,7 +41,7 @@ LOG_MODULE_REGISTER(adc_esp32, CONFIG_ADC_LOG_LEVEL);
  * clip the value instead of yet another correction. The IDF implementation
  * for ESP32-S2 is doing it, so we copy that approach in Zephyr driver
  */
-#define ADC_CLIP_MVOLT_11DB	2550
+#define ADC_CLIP_MVOLT_12DB     2550
 #elif CONFIG_SOC_SERIES_ESP32S3
 #define ADC_CALI_SCHEME		ESP_ADC_CAL_VAL_EFUSE_TP_FIT
 #else
@@ -95,7 +95,7 @@ static inline int gain_to_atten(enum adc_gain gain, adc_atten_t *atten)
 		*atten = ADC_ATTEN_DB_6;
 		break;
 	case ADC_GAIN_1_4:
-		*atten = ADC_ATTEN_DB_11;
+		*atten = ADC_ATTEN_DB_12;
 		break;
 	default:
 		return -ENOTSUP;
@@ -117,7 +117,7 @@ static void atten_to_gain(adc_atten_t atten, uint32_t *val_mv)
 	case ADC_ATTEN_DB_6:
 		*val_mv = *val_mv >> 1; /* 1/ADC_GAIN_1_2 */
 		break;
-	case ADC_ATTEN_DB_11:
+	case ADC_ATTEN_DB_12:
 		*val_mv = *val_mv / 4; /* 1/ADC_GAIN_1_4 */
 		break;
 	case ADC_ATTEN_DB_0: /* 1/ADC_GAIN_1 */
@@ -458,9 +458,9 @@ static int adc_esp32_read(const struct device *dev, const struct adc_sequence *s
 		cal = cal_mv = esp_adc_cal_raw_to_voltage(reading, &data->chars[channel_id]);
 
 #if CONFIG_SOC_SERIES_ESP32
-		if (data->attenuation[channel_id] == ADC_ATTEN_DB_11) {
-			if (cal > ADC_CLIP_MVOLT_11DB) {
-				cal = ADC_CLIP_MVOLT_11DB;
+		if (data->attenuation[channel_id] == ADC_ATTEN_DB_12) {
+			if (cal > ADC_CLIP_MVOLT_12DB) {
+				cal = ADC_CLIP_MVOLT_12DB;
 			}
 		}
 #endif /* CONFIG_SOC_SERIES_ESP32 */

drivers/dma/dma_esp32_gdma.c

@@ -33,11 +33,7 @@ LOG_MODULE_REGISTER(dma_esp32_gdma, CONFIG_DMA_LOG_LEVEL);
 #define ISR_HANDLER intr_handler_t
 #endif
 
-#if defined(CONFIG_SOC_SERIES_ESP32C6)
-#define DMA_MAX_CHANNEL SOC_GDMA_PAIRS_PER_GROUP_MAX
-#else
 #define DMA_MAX_CHANNEL SOC_GDMA_PAIRS_PER_GROUP
-#endif
 
 #define ESP_DMA_M2M_ON  0
 #define ESP_DMA_M2M_OFF 1

soc/espressif/common/Kconfig

@@ -32,7 +32,32 @@ config ESP_HEAP_RUNTIME
 	  ending by a last memory location that can be safely accesed (depending on a boot mode).
 	  This is a memory pool used in runtime to create a new heap memory.
 
+config ESP32_TIMER_TASK_STACK_SIZE
+	int "Stack size of the high resolution ESP Timer"
+	default 4096
+	help
+	  Set the stack size for the internal high resolution ESP Timer
+	  used in Wi-Fi and BLE peripherals.
+
+config ESP32_TIMER_TASK_PRIO
+	int "Task priority of the high resolution ESP Timer"
+	default 3
+	help
+	  Set the task priority for the internal high resolution ESP Timer
+	  used in Wi-Fi and BLE peripherals.
+
+if (BT_ESP32 || WIFI_ESP32)
+
+config ESP32_PHY_MAX_TX_POWER
+	int "Max Wi-Fi/BLE TX power (dBm)"
+	range 10 20
+	default 20
+	help
+	  Set maximum transmit power for Wi-Fi radio. Actual transmit power for high
+	  data rates may be lower than this setting.
+
+endif
+
 rsource "Kconfig.spiram"
 rsource "Kconfig.esptool"
 rsource "Kconfig.flash"
-rsource "Kconfig.wifi"

soc/espressif/common/Kconfig.esptool

@@ -114,7 +114,7 @@ endchoice # ESPTOOLPY_FLASHFREQ
 
 config ESPTOOLPY_FLASHFREQ_80M_DEFAULT
 	bool
-	default y if SOC_SERIES_ESP32S2 || SOC_SERIES_ESP32S3 || SOC_SERIES_ESP32C3
+	default y if SOC_SERIES_ESP32S2 || SOC_SERIES_ESP32S3 || SOC_SERIES_ESP32C3 || SOC_SERIES_ESP32C6
 	help
 	  This is an invisible item, used to define the targets that defaults to use 80MHz Flash SPI speed.
 

west.yml

@@ -157,7 +157,7 @@ manifest:
       groups:
         - hal
     - name: hal_espressif
-      revision: 09676fc39bde2c38d6cd40912875cf78ee76126e
+      revision: 0f1874284f5dee0d49cb23f44f756e7be404e7b7
       path: modules/hal/espressif
       west-commands: west/west-commands.yml
       groups: