michaelh/zephyr
1
0
Fork 0
Code Releases Activity

arch: soc: intel_s1000: set M/N divider ownership

Browse source 
Add bit definitions and set M/N divider ownership in
i2s_initialize.
Changes to comply with coding guidelines
Changes to address review comments

Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
This commit is contained in:
Sathish Kuttan 2018-05-30 08:19:59 -07:00 • committed by Anas Nashif
commit 9f4702b3b4
3 changed files with 24 additions and 16 deletions
Download patch file Download diff file Expand all files Collapse all files

7
arch/xtensa/soc/intel_s1000/soc.c
View file

@ -171,14 +171,17 @@ void setup_ownership_i2s(void)
u32_t value = I2S_OWNSEL(0) | I2S_OWNSEL(1) |
I2S_OWNSEL(2) | I2S_OWNSEL(3);
*(volatile u32_t *)SUE_DSPIOPO_REG |= value;
value = DSP_RES_ALLOC_GENO_MDIVOSEL;
*(volatile u32_t *)DSP_RES_ALLOC_GEN_OWNER |= value;
}
u32_t soc_get_ref_clk_freq(void)
{
u32_t bootstrap;
static u32_t freq = 0;
static u32_t freq;
if (0 == freq) {
if (freq == 0) {
/* if bootstraps have not been read before, read them */
bootstrap = *((volatile u32_t *)SOC_S1000_GLB_CTRL_STRAPS);

10
arch/xtensa/soc/intel_s1000/soc.h
View file

@ -107,8 +107,8 @@
#define SSP_SIZE 0x0000200
#define SSP_BASE(x) (0x00077000 + (x) * SSP_SIZE)
#define SSP_MN_DIV_BASE (0x00078D00)
#define SSP_MN_DIV_SIZE (8)
#define SSP_MN_DIV_BASE(x) (0x00078D00 + ((x) * SSP_MN_DIV_SIZE))
#define SOC_INTEL_S1000_MCK_XTAL_FREQ_HZ 38400000
@ -118,6 +118,12 @@
#define SUE_DSP_RES_ALLOC_REG_BASE 0x00071A60
#define SUE_DSPIOPO_REG (SUE_DSP_RES_ALLOC_REG_BASE + 0x08)
#define I2S_OWNSEL(x) (0x1 << (8 + (x)))
/* Address and bit field definition for general ownership register */
#define DSP_RES_ALLOC_GEN_OWNER (SUE_DSP_RES_ALLOC_REG_BASE + 0x0C)
#define DSP_RES_ALLOC_GENO_DIOPTOSEL (BIT(2))
#define DSP_RES_ALLOC_GENO_MDIVOSEL (BIT(1))
#define USB_DW_BASE 0x000A0000
#define USB_DW_IRQ 0x00000806

3
drivers/i2s/i2s_cavs.c
View file

@ -380,7 +380,6 @@ static int i2s_cavs_configure(struct device *dev, enum i2s_dir dir,
} else {
/* enable BCLK output */
ssioc = SSIOC_SCOE;
}
if (i2s_cfg->options & I2S_OPT_FRAME_CLK_SLAVE) {
@ -771,7 +770,7 @@ static void i2s1_irq_config(void)
static const struct i2s_cavs_config i2s1_cavs_config = {
.regs = (struct i2s_cavs_ssp *)SSP_BASE(1),
.mn_regs = &((struct i2s_cavs_mn_div *)SSP_MN_DIV_BASE)[1],
.mn_regs = (struct i2s_cavs_mn_div *)SSP_MN_DIV_BASE(1),
.irq_id = I2S1_CAVS_IRQ,
.irq_config = i2s1_irq_config,
};