michaelh/zephyr
1
0
Fork 0
Code Releases Activity

dts: Align uart "baud-rate" property to device tree spec "current-speed"

Browse source 
Devicetree.org specifies that serial devices property used to set
baud rate is "current-speed", while zephyr uses "baud-rate".
Align property name in order to keep zephyr dts files compatible
with device tree specification and could be re-used from/to
Linux for instance.  We also cleanup a few SoCs that set "baud-rate" in
the SoC dts and not the board.

Jira: ZEP-2048

Change-Id: I097e7439ee46fe77c628b56531772950382fafcc
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is contained in:
Erwan Gouriou 2017-04-20 17:10:10 +02:00 • committed by Kumar Gala
commit 9bd2a42d60
34 changed files with 59 additions and 62 deletions
Download patch file Download diff file Expand all files Collapse all files

2
drivers/serial/uart_cc32xx.c
View file

@ -62,7 +62,7 @@ static int uart_cc32xx_init(struct device *dev)
/* This also calls MAP_UARTEnable() to enable the FIFOs: */
MAP_UARTConfigSetExpClk((unsigned long)config->base,
MAP_PRCMPeripheralClockGet(PRCM_UARTA0),
TI_CC32XX_UART_4000C000_BAUD_RATE,
TI_CC32XX_UART_4000C000_CURRENT_SPEED,
(UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE
| UART_CONFIG_PAR_NONE));
MAP_UARTFlowControlSet((unsigned long)config->base,

4
dts/arm/96b_carbon.dts
View file

@ -19,11 +19,11 @@
};
&usart1 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};
&usart2 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};

5
dts/arm/96b_carbon.fixup
View file

@ -8,12 +8,11 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_STM32_PORT_1_BASE_ADDRESS ST_STM32_USART_40011000_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40011000_BAUD_RATE
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40011000_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_1_IRQ_PRI ST_STM32_USART_40011000_IRQ_0_PRIORITY
#define PORT_1_IRQ ST_STM32_USART_40011000_IRQ_0
#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_BAUD_RATE
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_IRQ_0_PRIORITY
#define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0

2
dts/arm/cc3200_launchxl.dts
View file

@ -19,5 +19,5 @@
&uart0 {
status = "ok";
baud-rate = <115200>;
current-speed = <115200>;
};

4
dts/arm/frdm_k64f.dts
View file

@ -30,12 +30,12 @@
&uart0 {
status = "ok";
baud-rate = <115200>;
current-speed = <115200>;
};
#ifdef CONFIG_BLUETOOTH
&uart3 {
status = "ok";
baud-rate = <115200>;
current-speed = <115200>;
};
#endif

12
dts/arm/frdm_k64f.fixup
View file

@ -1,19 +1,19 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_MCUX_0_BAUD_RATE NXP_K64F_UART_4006A000_BAUD_RATE
#define CONFIG_UART_MCUX_0_BAUD_RATE NXP_K64F_UART_4006A000_CURRENT_SPEED
#define CONFIG_UART_MCUX_0_IRQ_PRI NXP_K64F_UART_4006A000_IRQ_0_PRIORITY
#define CONFIG_UART_MCUX_1_BAUD_RATE NXP_K64F_UART_4006B000_BAUD_RATE
#define CONFIG_UART_MCUX_1_BAUD_RATE NXP_K64F_UART_4006B000_CURRENT_SPEED
#define CONFIG_UART_MCUX_1_IRQ_PRI NXP_K64F_UART_4006B000_IRQ_0_PRIORITY
#define CONFIG_UART_MCUX_2_BAUD_RATE NXP_K64F_UART_4006C000_BAUD_RATE
#define CONFIG_UART_MCUX_2_BAUD_RATE NXP_K64F_UART_4006C000_CURRENT_SPEED
#define CONFIG_UART_MCUX_2_IRQ_PRI NXP_K64F_UART_4006C000_IRQ_0_PRIORITY
#define CONFIG_UART_MCUX_3_BAUD_RATE NXP_K64F_UART_4006D000_BAUD_RATE
#define CONFIG_UART_MCUX_3_BAUD_RATE NXP_K64F_UART_4006D000_CURRENT_SPEED
#define CONFIG_UART_MCUX_3_IRQ_PRI NXP_K64F_UART_4006D000_IRQ_0_PRIORITY
#define CONFIG_UART_MCUX_4_BAUD_RATE NXP_K64F_UART_400EA000_BAUD_RATE
#define CONFIG_UART_MCUX_4_BAUD_RATE NXP_K64F_UART_400EA000_CURRENT_SPEED
#define CONFIG_UART_MCUX_4_IRQ_PRI NXP_K64F_UART_400EA000_IRQ_0_PRIORITY
#define CONFIG_UART_MCUX_5_BAUD_RATE NXP_K64F_UART_400EB000_BAUD_RATE
#define CONFIG_UART_MCUX_5_BAUD_RATE NXP_K64F_UART_400EB000_CURRENT_SPEED
#define CONFIG_UART_MCUX_5_IRQ_PRI NXP_K64F_UART_400EB000_IRQ_0_PRIORITY

1
dts/arm/frdm_kw41z.dts
View file

@ -25,4 +25,5 @@
&lpuart0 {
status = "ok";
current-speed = <115200>;
};

2
dts/arm/frdm_kw41z.fixup
View file

@ -1,4 +1,4 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V6M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_MCUX_LPUART_0_BAUD_RATE NXP_KW41Z_LPUART_40054000_BAUD_RATE
#define CONFIG_UART_MCUX_LPUART_0_BAUD_RATE NXP_KW41Z_LPUART_40054000_CURRENT_SPEED
#define CONFIG_UART_MCUX_LPUART_0_IRQ_PRI NXP_KW41Z_LPUART_40054000_IRQ_0_PRIORITY

4
dts/arm/hexiwear_k64.dts
View file

@ -31,12 +31,12 @@
&uart0 {
status = "ok";
baud-rate = <115200>;
current-speed = <115200>;
};
#ifdef CONFIG_BLUETOOTH
&uart4 {
status = "ok";
baud-rate = <115200>;
current-speed = <115200>;
};
#endif

12
dts/arm/hexiwear_k64.fixup
View file

@ -1,19 +1,19 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_MCUX_0_BAUD_RATE NXP_K64F_UART_4006A000_BAUD_RATE
#define CONFIG_UART_MCUX_0_BAUD_RATE NXP_K64F_UART_4006A000_CURRENT_SPEED
#define CONFIG_UART_MCUX_0_IRQ_PRI NXP_K64F_UART_4006A000_IRQ_0_PRIORITY
#define CONFIG_UART_MCUX_1_BAUD_RATE NXP_K64F_UART_4006B000_BAUD_RATE
#define CONFIG_UART_MCUX_1_BAUD_RATE NXP_K64F_UART_4006B000_CURRENT_SPEED
#define CONFIG_UART_MCUX_1_IRQ_PRI NXP_K64F_UART_4006B000_IRQ_0_PRIORITY
#define CONFIG_UART_MCUX_2_BAUD_RATE NXP_K64F_UART_4006C000_BAUD_RATE
#define CONFIG_UART_MCUX_2_BAUD_RATE NXP_K64F_UART_4006C000_CURRENT_SPEED
#define CONFIG_UART_MCUX_2_IRQ_PRI NXP_K64F_UART_4006C000_IRQ_0_PRIORITY
#define CONFIG_UART_MCUX_3_BAUD_RATE NXP_K64F_UART_4006D000_BAUD_RATE
#define CONFIG_UART_MCUX_3_BAUD_RATE NXP_K64F_UART_4006D000_CURRENT_SPEED
#define CONFIG_UART_MCUX_3_IRQ_PRI NXP_K64F_UART_4006D000_IRQ_0_PRIORITY
#define CONFIG_UART_MCUX_4_BAUD_RATE NXP_K64F_UART_400EA000_BAUD_RATE
#define CONFIG_UART_MCUX_4_BAUD_RATE NXP_K64F_UART_400EA000_CURRENT_SPEED
#define CONFIG_UART_MCUX_4_IRQ_PRI NXP_K64F_UART_400EA000_IRQ_0_PRIORITY
#define CONFIG_UART_MCUX_5_BAUD_RATE NXP_K64F_UART_400EB000_BAUD_RATE
#define CONFIG_UART_MCUX_5_BAUD_RATE NXP_K64F_UART_400EB000_CURRENT_SPEED
#define CONFIG_UART_MCUX_5_IRQ_PRI NXP_K64F_UART_400EB000_IRQ_0_PRIORITY

2
dts/arm/hexiwear_kw40z.dts
View file

@ -24,5 +24,5 @@
&lpuart0 {
status = "ok";
baud-rate = <115200>;
current-speed = <115200>;
};

2
dts/arm/hexiwear_kw40z.fixup
View file

@ -1,4 +1,4 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V6M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_MCUX_LPUART_0_BAUD_RATE NXP_KW41Z_LPUART_40054000_BAUD_RATE
#define CONFIG_UART_MCUX_LPUART_0_BAUD_RATE NXP_KW41Z_LPUART_40054000_CURRENT_SPEED
#define CONFIG_UART_MCUX_LPUART_0_IRQ_PRI NXP_KW41Z_LPUART_40054000_IRQ_0_PRIORITY

2
dts/arm/nucleo_f103rb.dts
View file

@ -19,6 +19,6 @@
};
&usart2 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};

2
dts/arm/nucleo_f103rb.fixup
View file

@ -8,6 +8,6 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_BAUD_RATE
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_IRQ_0_PRIORITY
#define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0

2
dts/arm/nucleo_f334r8.dts
View file

@ -19,6 +19,6 @@
};
&usart2 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};

2
dts/arm/nucleo_f334r8.fixup
View file

@ -8,6 +8,6 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_BAUD_RATE
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_IRQ_0_PRIORITY
#define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0

4
dts/arm/nucleo_f401re.dts
View file

@ -19,11 +19,11 @@
};
&usart1 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};
&usart2 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};

5
dts/arm/nucleo_f401re.fixup
View file

@ -8,12 +8,11 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_STM32_PORT_1_BASE_ADDRESS ST_STM32_USART_40011000_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40011000_BAUD_RATE
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40011000_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_1_IRQ_PRI ST_STM32_USART_40011000_IRQ_0_PRIORITY
#define PORT_1_IRQ ST_STM32_USART_40011000_IRQ_0
#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_BAUD_RATE
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_IRQ_0_PRIORITY
#define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0

4
dts/arm/nucleo_f411re.dts
View file

@ -19,11 +19,11 @@
};
&usart1 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};
&usart2 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};

5
dts/arm/nucleo_f411re.fixup
View file

@ -8,12 +8,11 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_STM32_PORT_1_BASE_ADDRESS ST_STM32_USART_40011000_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40011000_BAUD_RATE
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40011000_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_1_IRQ_PRI ST_STM32_USART_40011000_IRQ_0_PRIORITY
#define PORT_1_IRQ ST_STM32_USART_40011000_IRQ_0
#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_BAUD_RATE
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_IRQ_0_PRIORITY
#define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0

2
dts/arm/nucleo_l476rg.dts
View file

@ -19,6 +19,6 @@
};
&usart2 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};

10
dts/arm/nucleo_l476rg.fixup
View file

@ -7,26 +7,26 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_STM32_PORT_1_BASE_ADDRESS ST_STM32_USART_40013800_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40013800_BAUD_RATE
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40013800_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_1_IRQ_PRI ST_STM32_USART_40013800_IRQ_0_PRIORITY
#define PORT_1_IRQ ST_STM32_USART_40013800_IRQ_0
#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_BAUD_RATE
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_IRQ_0_PRIORITY
#define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0
#define CONFIG_UART_STM32_PORT_3_BASE_ADDRESS ST_STM32_USART_40004800_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_3_BAUD_RATE ST_STM32_USART_40004800_BAUD_RATE
#define CONFIG_UART_STM32_PORT_3_BAUD_RATE ST_STM32_USART_40004800_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_3_IRQ_PRI ST_STM32_USART_40004800_IRQ_0_PRIORITY
#define PORT_3_IRQ ST_STM32_USART_40004800_IRQ_0
#define CONFIG_UART_STM32_PORT_4_BASE_ADDRESS ST_STM32_USART_40004C00_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_4_BAUD_RATE ST_STM32_USART_40004C00_BAUD_RATE
#define CONFIG_UART_STM32_PORT_4_BAUD_RATE ST_STM32_USART_40004C00_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_4_IRQ_PRI ST_STM32_USART_40004C00_IRQ_0_PRIORITY
#define PORT_4_IRQ ST_STM32_USART_40004C00_IRQ_0
#define CONFIG_UART_STM32_PORT_5_BASE_ADDRESS ST_STM32_USART_40005000_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_5_BAUD_RATE ST_STM32_USART_40005000_BAUD_RATE
#define CONFIG_UART_STM32_PORT_5_BAUD_RATE ST_STM32_USART_40005000_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_5_IRQ_PRI ST_STM32_USART_40005000_IRQ_0_PRIORITY
#define PORT_5_IRQ ST_STM32_USART_40005000_IRQ_0

1
dts/arm/nxp/nxp_kw41z.dtsi
View file

@ -49,7 +49,6 @@
reg = <0x40054000 0x18>;
interrupts = <12 0>;
baud-rate = <115200>;
pinctrl-0 = <&lpuart0_default>;
pinctrl-names = "default";

2
dts/arm/olimexino_stm32.dts
View file

@ -19,6 +19,6 @@
};
&usart1 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};

6
dts/arm/olimexino_stm32.fixup
View file

@ -8,16 +8,16 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_STM32_PORT_1_BASE_ADDRESS ST_STM32_USART_40013800_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40013800_BAUD_RATE
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40013800_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_1_IRQ_PRI ST_STM32_USART_40013800_IRQ_0_PRIORITY
#define PORT_1_IRQ ST_STM32_USART_40013800_IRQ_0
#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_BAUD_RATE
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_IRQ_0_PRIORITY
#define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0
#define CONFIG_UART_STM32_PORT_3_BASE_ADDRESS ST_STM32_USART_40004800_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_3_BAUD_RATE ST_STM32_USART_40004800_BAUD_RATE
#define CONFIG_UART_STM32_PORT_3_BAUD_RATE ST_STM32_USART_40004800_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_3_IRQ_PRI ST_STM32_USART_40004800_IRQ_0_PRIORITY
#define PORT_3_IRQ ST_STM32_USART_40004800_IRQ_0

2
dts/arm/stm3210c_eval.dts
View file

@ -19,6 +19,6 @@
};
&usart2 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};

2
dts/arm/stm3210c_eval.fixup
View file

@ -8,6 +8,6 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_BAUD_RATE
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_IRQ_0_PRIORITY
#define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0

2
dts/arm/stm32373c_eval.dts
View file

@ -19,6 +19,6 @@
};
&usart2 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};

2
dts/arm/stm32373c_eval.fixup
View file

@ -8,6 +8,6 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_BAUD_RATE
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_IRQ_0_PRIORITY
#define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0

2
dts/arm/stm32_mini_a15.dts
View file

@ -19,6 +19,6 @@
};
&usart1 {
baud-rate = <115200>;
current-speed = <115200>;
status = "ok";
};

2
dts/arm/stm32_mini_a15.fixup
View file

@ -8,6 +8,6 @@
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
#define CONFIG_UART_STM32_PORT_1_BASE_ADDRESS ST_STM32_USART_40013800_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40013800_BAUD_RATE
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40013800_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_1_IRQ_PRI ST_STM32_USART_40013800_IRQ_0_PRIORITY
#define PORT_1_IRQ ST_STM32_USART_40013800_IRQ_0

4
dts/arm/v2m_beetle.dts
View file

@ -34,14 +34,14 @@
compatible = "arm,cmsdk-uart";
reg = <0x40004000 0x14>;
interrupts = <IRQ_UART0 3>;
baud-rate = <115200>;
current-speed = <115200>;
};
uart1: uart@40005000 {
compatible = "arm,cmsdk-uart";
reg = <0x40005000 0x14>;
interrupts = <IRQ_UART1 3>;
baud-rate = <115200>;
current-speed = <115200>;
};
};
};

4
dts/arm/v2m_beetle.fixup
View file

@ -2,8 +2,8 @@
#define CMSDK_APB_UART_0_IRQ ARM_CMSDK_UART_40004000_IRQ_0
#define CONFIG_UART_CMSDK_APB_PORT0_IRQ_PRI ARM_CMSDK_UART_40004000_IRQ_0_PRIORITY
#define CONFIG_UART_CMSDK_APB_PORT0_BAUD_RATE ARM_CMSDK_UART_40004000_BAUD_RATE
#define CONFIG_UART_CMSDK_APB_PORT0_BAUD_RATE ARM_CMSDK_UART_40004000_CURRENT_SPEED
#define CMSDK_APB_UART_1_IRQ ARM_CMSDK_UART_40005000_IRQ_0
#define CONFIG_UART_CMSDK_APB_PORT1_IRQ_PRI ARM_CMSDK_UART_40005000_IRQ_0_PRIORITY
#define CONFIG_UART_CMSDK_APB_PORT1_BAUD_RATE ARM_CMSDK_UART_40005000_BAUD_RATE
#define CONFIG_UART_CMSDK_APB_PORT1_BAUD_RATE ARM_CMSDK_UART_40005000_CURRENT_SPEED

2
dts/common/yaml/uart.yaml
View file

@ -12,7 +12,7 @@ properties:
category: optional
description: Clock frequency information for UART operation
generation: define
- baud-rate:
- current-speed:
type: int
category: required
description: Initial baud rate setting for UART