diff --git a/arch/arm/soc/ti_simplelink/cc32xx/Kconfig.defconfig.cc3200 b/arch/arm/soc/ti_simplelink/cc32xx/Kconfig.defconfig.cc3200
index 2e16c30b0c8..e219919e146 100644
--- a/arch/arm/soc/ti_simplelink/cc32xx/Kconfig.defconfig.cc3200
+++ b/arch/arm/soc/ti_simplelink/cc32xx/Kconfig.defconfig.cc3200
@@ -11,15 +11,6 @@ config SYS_CLOCK_HW_CYCLES_PER_SEC
 	int
 	default 80000000
 
-if !HAS_DTS
-config SRAM_SIZE
-	default 240
-
-config FLASH_SIZE
-	default 0
-
-endif # !HAS_DTS
-
 config NUM_IRQS
 	int
 	# must be >= the highest interrupt number used
@@ -29,13 +20,6 @@ config NUM_IRQS
 config CC3200SDK_LIBRARY
 	def_bool n
 
-if !HAS_DTS
-if UART_CC32XX
-config UART_CC32XX_IRQ_PRI
-	default 3
-endif # UART_CC32XX
-endif # !HAS_DTS
-
 if GPIO
 
 config GPIO_CC32XX
diff --git a/arch/arm/soc/ti_simplelink/cc32xx/Kconfig.defconfig.series b/arch/arm/soc/ti_simplelink/cc32xx/Kconfig.defconfig.series
index 69bc0296f36..d5a5ca1799d 100644
--- a/arch/arm/soc/ti_simplelink/cc32xx/Kconfig.defconfig.series
+++ b/arch/arm/soc/ti_simplelink/cc32xx/Kconfig.defconfig.series
@@ -8,13 +8,4 @@ source "arch/arm/soc/ti_simplelink/cc32xx/Kconfig.defconfig.cc32*"
 config SOC_SERIES
 	default cc32xx
 
-if !HAS_DTS
-config SRAM_BASE_ADDRESS
-	default 0x20004000
-
-config NUM_IRQ_PRIO_BITS
-	int
-	default 3
-endif # !HAS_DTS
-
 endif # SOC_SERIES_CC32XX
diff --git a/drivers/serial/Kconfig.cc32xx b/drivers/serial/Kconfig.cc32xx
index 1f8c3b6df19..5b755fdc81d 100644
--- a/drivers/serial/Kconfig.cc32xx
+++ b/drivers/serial/Kconfig.cc32xx
@@ -13,17 +13,3 @@ config UART_CC32XX_NAME
 	depends on UART_CC32XX
 	help
 	  This is the UART's device name binding.
-
-if !HAS_DTS
-config UART_CC32XX_IRQ_PRI
-	depends on UART_CC32XX
-	int "IRQ priority from UART controller"
-
-config UART_CC32XX_BAUDRATE
-	depends on UART_CC32XX
-	int "UART_0 baud rate"
-	default 115200
-	help
-	  This option sets the baud rate for the CC32XX UART.
-
-endif # !HAS_DTS
diff --git a/drivers/serial/uart_cc32xx.c b/drivers/serial/uart_cc32xx.c
index 0bceab988a6..6fb07e009b1 100644
--- a/drivers/serial/uart_cc32xx.c
+++ b/drivers/serial/uart_cc32xx.c
@@ -36,7 +36,7 @@ static void uart_cc32xx_isr(void *arg);
 #endif
 
 static const struct uart_device_config uart_cc32xx_dev_cfg_0 = {
-	.base = (void *)UART_CC32XX_BASE_ADDRESS,
+	.base = (void *)TI_CC32XX_UART_4000C000_BASE_ADDRESS,
 	.sys_clk_freq = CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC,
 };
 
@@ -62,7 +62,7 @@ static int uart_cc32xx_init(struct device *dev)
 	/* This also calls MAP_UARTEnable() to enable the FIFOs: */
 	MAP_UARTConfigSetExpClk((unsigned long)config->base,
 				MAP_PRCMPeripheralClockGet(PRCM_UARTA0),
-				CONFIG_UART_CC32XX_BAUDRATE,
+				TI_CC32XX_UART_4000C000_BAUD_RATE,
 				(UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE
 				 | UART_CONFIG_PAR_NONE));
 	MAP_UARTFlowControlSet((unsigned long)config->base,
@@ -75,11 +75,11 @@ static int uart_cc32xx_init(struct device *dev)
 	MAP_UARTIntClear((unsigned long)config->base,
 		(UART_INT_RX | UART_INT_TX));
 
-	IRQ_CONNECT(EXCEPTION_UARTA0,
-		    CONFIG_UART_CC32XX_IRQ_PRI,
+	IRQ_CONNECT(TI_CC32XX_UART_4000C000_IRQ_0,
+		    TI_CC32XX_UART_4000C000_IRQ_0_PRIORITY,
 		    uart_cc32xx_isr, DEVICE_GET(uart_cc32xx_0),
 		    0);
-	irq_enable(EXCEPTION_UARTA0);
+	irq_enable(TI_CC32XX_UART_4000C000_IRQ_0);
 #endif
 	return 0;
 }
diff --git a/dts/arm/cc3200_launchxl.fixup b/dts/arm/cc3200_launchxl.fixup
index 76123bbeb26..1dea2fa9aaa 100644
--- a/dts/arm/cc3200_launchxl.fixup
+++ b/dts/arm/cc3200_launchxl.fixup
@@ -1,6 +1 @@
 #define CONFIG_NUM_IRQ_PRIO_BITS	ARM_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
-
-#define EXCEPTION_UARTA0		TI_CC32XX_UART_4000C000_IRQ_0
-#define CONFIG_UART_CC32XX_IRQ_PRI	TI_CC32XX_UART_4000C000_IRQ_0_PRIORITY
-#define UART_CC32XX_BASE_ADDRESS	TI_CC32XX_UART_4000C000_BASE_ADDRESS
-#define CONFIG_UART_CC32XX_BAUDRATE	TI_CC32XX_UART_4000C000_BAUD_RATE