michaelh/zephyr
1
0
Fork 0
Code Releases Activity

serial: remove Kconfig.defconfig setting of serial drivers

Browse source 
Now that serial drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.

Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the serial.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.

Signed-off-by: Kumar Gala <galak@kernel.org>
This commit is contained in:
Kumar Gala 2022-07-26 06:23:24 -05:00 • committed by Kumar Gala
commit 9a501e0922
72 changed files with 0 additions and 334 deletions
Download patch file Download diff file Expand all files Collapse all files

4
boards/arc/em_starterkit/Kconfig.defconfig
View file

@ -26,10 +26,6 @@ endif # I2C_DW
endif # I2C
config UART_NS16550
default y
depends on SERIAL
if SPI
config SPI_DW

4
boards/arc/emsdp/Kconfig.defconfig
View file

@ -16,8 +16,4 @@ config GPIO_INIT_PRIORITY
endif # GPIO
config UART_NS16550
default y
depends on SERIAL
endif # BOARD_EMSDP

4
boards/arc/nsim/Kconfig.defconfig
View file

@ -5,8 +5,4 @@ if BOARD_NSIM
config BOARD
default "nsim"
config UART_NS16550
default y
depends on SERIAL
endif # BOARD_NSIM

7
boards/arm/arty/Kconfig.defconfig
View file

@ -18,13 +18,6 @@ config CPU_HAS_ARM_MPU
config NUM_IRQS
default 7
if SERIAL
config UART_XLNX_UARTLITE
default y
endif # SERIAL
config GPIO
default y if "$(dt_nodelabel_enabled,daplink_qspi_mux)"

3
boards/arm/efm32gg_slwstk6121a/Kconfig.defconfig
View file

@ -23,9 +23,6 @@ config COUNTER_GECKO_RTCC
default y
depends on COUNTER
config LEUART_GECKO
default n
config LOG_BACKEND_SWO_FREQ_HZ
default 875000
depends on LOG_BACKEND_SWO

4
boards/arm/efr32_radio/Kconfig.defconfig
View file

@ -22,10 +22,6 @@ config LOG_BACKEND_SWO_FREQ_HZ
default 875000
depends on LOG_BACKEND_SWO
config UART_GECKO
default y
depends on SERIAL
config COUNTER_GECKO_RTCC
default y
depends on COUNTER

3
boards/arm/holyiot_yj16019/Kconfig.defconfig
View file

@ -11,9 +11,6 @@ config BOARD
config GPIO_AS_PINRESET
default n
config UART_NRFX
default n
config BT_CTLR
default BT

3
boards/arm/mps2_an385/Kconfig.defconfig
View file

@ -8,9 +8,6 @@ config BOARD
if SERIAL
config UART_CMSDK_APB
default y
config UART_INTERRUPT_DRIVEN
default y

3
boards/arm/mps2_an521/Kconfig.defconfig
View file

@ -24,9 +24,6 @@ config BUILD_WITH_TFM
if SERIAL
config UART_CMSDK_APB
default y
config UART_INTERRUPT_DRIVEN
default y

3
boards/arm/mps3_an547/Kconfig.defconfig
View file

@ -16,9 +16,6 @@ endchoice
if SERIAL
config UART_CMSDK_APB
default y
config UART_INTERRUPT_DRIVEN
default y

7
boards/arm/qemu_cortex_a9/Kconfig.defconfig
View file

@ -70,13 +70,6 @@ if QEMU_ICOUNT
endif # QEMU_ICOUNT
if SERIAL
config UART_XLNX_PS
default y
endif # SERIAL
if SHELL
config SHELL_STACK_SIZE

4
boards/arm/scobc_module1/Kconfig.defconfig
View file

@ -17,8 +17,4 @@ config CPU_HAS_ARM_MPU
config NUM_IRQS
default 7
config UART_XLNX_UARTLITE
depends on SERIAL
default y
endif # BOARD_SCOBC_MODULE1

3
boards/arm/v2m_beetle/Kconfig.defconfig
View file

@ -14,9 +14,6 @@ config PINMUX_BEETLE
if SERIAL
config UART_CMSDK_APB
default y
config UART_INTERRUPT_DRIVEN
default y

3
boards/arm/v2m_musca_b1/Kconfig.defconfig
View file

@ -9,9 +9,6 @@ config BOARD
if SERIAL
config UART_PL011
default y
config UART_INTERRUPT_DRIVEN
default y

3
boards/arm/v2m_musca_s1/Kconfig.defconfig
View file

@ -9,9 +9,6 @@ config BOARD
if SERIAL
config UART_PL011
default y
config UART_INTERRUPT_DRIVEN
default y

4
boards/arm/zybo/Kconfig.defconfig
View file

@ -8,8 +8,4 @@ if BOARD_ZYBO
config BOARD
default "zybo"
config UART_XLNX_PS
default y
depends on SERIAL
endif # BOARD_ZYBO

4
boards/posix/native_posix/Kconfig.defconfig
View file

@ -34,10 +34,6 @@ choice BT_HCI_BUS_TYPE
depends on BT_HCI
endchoice
config UART_NATIVE_POSIX
default y
depends on SERIAL
if LOG
# For native_posix we can log synchronously without any problem

4
boards/riscv/hifive_unleashed/Kconfig.defconfig
View file

@ -16,8 +16,4 @@ config SPI_SIFIVE
default y
depends on SPI
config UART_SIFIVE
default y
depends on SERIAL
endif

4
boards/riscv/hifive_unmatched/Kconfig.defconfig
View file

@ -16,8 +16,4 @@ config SPI_SIFIVE
default y
depends on SPI
config UART_SIFIVE
default y
depends on SERIAL
endif

4
boards/riscv/rv32m1_vega/Kconfig.defconfig
View file

@ -6,10 +6,6 @@ config BOARD
default "rv32m1_vega_ri5cy" if SOC_OPENISA_RV32M1_RI5CY
default "rv32m1_vega_zero_riscy" if SOC_OPENISA_RV32M1_ZERO_RISCY
config UART_RV32M1_LPUART
default y
depends on SERIAL
config I2C
default y if SENSOR

3
boards/riscv/tlsr9518adk80d/Kconfig.defconfig
View file

@ -6,9 +6,6 @@ if BOARD_TLSR9518ADK80D
config BOARD
default "tlsr9518adk80d"
config UART_TELINK_B91
default y if SERIAL
config PWM_TELINK_B91
default y if PWM

4
soc/arc/snps_arc_hsdk/Kconfig.defconfig
View file

@ -39,10 +39,6 @@ config ARC_CONNECT
config MP_NUM_CPUS
default 4
config UART_NS16550
default y
depends on SERIAL
config UART_NS16550_ACCESS_WORD_ONLY
default y
depends on UART_NS16550

4
soc/arc/snps_arc_iot/Kconfig.defconfig
View file

@ -34,10 +34,6 @@ config HARVARD
config ARC_FIRQ
default y
config UART_NS16550
default y
depends on SERIAL
config UART_NS16550_ACCESS_IOPORT
default y

3
soc/arm/atmel_sam0/common/Kconfig.defconfig.series
View file

@ -26,9 +26,6 @@ config PWM_SAM0_TCC
config SPI_SAM0
default SPI
config UART_SAM0
default SERIAL
config USB_DC_SAM0
default USB_DEVICE_DRIVER

4
soc/arm/cypress/psoc6/Kconfig.defconfig.series
View file

@ -25,9 +25,5 @@ config SPI_PSOC6
default y
depends on SPI
config UART_PSOC6
default y
depends on SERIAL
endif # SOC_SERIES_PSOC62 || \
# SOC_SERIES_PSOC63

4
soc/arm/infineon_xmc/4xxx/Kconfig.defconfig.series
View file

@ -12,10 +12,6 @@ config SOC_SERIES
config NUM_IRQS
default 112
config UART_XMC4XXX
default y
depends on SERIAL
source "soc/arm/infineon_xmc/4xxx/Kconfig.defconfig.xmc*"
endif # SOC_SERIES_XMC_4XXX

4
soc/arm/microchip_mec/mec1501/Kconfig.defconfig.mec1501hsz
View file

@ -8,10 +8,6 @@ if SOC_MEC1501_HSZ
config SOC
default "mec1501hsz"
config UART_NS16550
default y
depends on SERIAL
config PINMUX_XEC
default y
depends on PINMUX

4
soc/arm/microchip_mec/mec1701/Kconfig.defconfig.mec1701qsz
View file

@ -11,8 +11,4 @@ config SOC
config SYS_CLOCK_HW_CYCLES_PER_SEC
default 48000000
config UART_NS16550
default y
depends on SERIAL
endif # SOC_MEC1701_QSZ

4
soc/arm/microchip_mec/mec172x/Kconfig.defconfig.mec172xnsz
View file

@ -8,10 +8,6 @@ if SOC_MEC172X_NSZ
config SOC
default "mec172xnsz"
config UART_XEC
default y
depends on SERIAL
config GPIO
default y

4
soc/arm/nuvoton_npcx/npcx7/Kconfig.defconfig.series
View file

@ -18,10 +18,6 @@ config CLOCK_CONTROL_NPCX
default y
depends on CLOCK_CONTROL
config UART_NPCX
default y
depends on SERIAL
config PWM_NPCX
default y
depends on PWM

4
soc/arm/nuvoton_npcx/npcx9/Kconfig.defconfig.series
View file

@ -18,10 +18,6 @@ config CLOCK_CONTROL_NPCX
default y
depends on CLOCK_CONTROL
config UART_NPCX
default y
depends on SERIAL
config PWM_NPCX
default y
depends on PWM

4
soc/arm/nxp_imx/mcimx6x_m4/Kconfig.defconfig.mcimx6x_m4
View file

@ -11,10 +11,6 @@ config SOC
config FPU
default y
config UART_IMX
default y
depends on SERIAL
config I2C_IMX
default y
depends on I2C

4
soc/arm/nxp_imx/mcimx7_m4/Kconfig.defconfig.mcimx7_m4
View file

@ -14,10 +14,6 @@ config SYS_CLOCK_HW_CYCLES_PER_SEC
config GPIO
default y
config UART_IMX
default y
depends on SERIAL
config I2C_IMX
default y
depends on I2C

7
soc/arm/nxp_imx/mimx8ml8_m7/Kconfig.defconfig.mimx8ml8_m7
View file

@ -30,13 +30,6 @@ endif # PINMUX
config GPIO
default y
if SERIAL
config UART_MCUX_IUART
default y
endif # SERIAL
config IPM_IMX_REV2
default y
depends on IPM

7
soc/arm/nxp_imx/mimx8mm6_m4/Kconfig.defconfig.mimx8mm6_m4
View file

@ -27,13 +27,6 @@ config PINMUX_MCUX
endif # PINMUX
if SERIAL
config UART_MCUX_IUART
default y
endif # SERIAL
config IPM_IMX_REV2
default y
depends on IPM

7
soc/arm/nxp_imx/mimx8mq6_m4/Kconfig.defconfig.mimx8mq6_m4
View file

@ -31,11 +31,4 @@ config PINCTRL_IMX
default y if HAS_MCUX_IOMUXC
depends on PINCTRL
if SERIAL
config UART_MCUX_IUART
default y
endif # SERIAL
endif # SOC_MIMX8MQ6

4
soc/arm/nxp_imx/rt/Kconfig.defconfig.series
View file

@ -52,10 +52,6 @@ config ETH_MCUX
default y if HAS_MCUX_ENET
depends on NET_L2_ETHERNET
config UART_MCUX_LPUART
default y if HAS_MCUX_LPUART
depends on SERIAL
config IMX_USDHC
default y if (HAS_MCUX_USDHC1 || HAS_MCUX_USDHC2)
depends on SDHC

4
soc/arm/nxp_imx/rt5xx/Kconfig.defconfig.mimxrt595_cm33
View file

@ -12,10 +12,6 @@ config PINMUX_MCUX_LPC
default y
depends on PINMUX
config UART_MCUX_FLEXCOMM
default y if HAS_MCUX_FLEXCOMM
depends on SERIAL
config I2C_MCUX_FLEXCOMM
default y if HAS_MCUX_FLEXCOMM
depends on I2C

4
soc/arm/nxp_imx/rt6xx/Kconfig.defconfig.mimxrt685_cm33
View file

@ -12,10 +12,6 @@ config PINMUX_MCUX_LPC
default y
depends on PINMUX
config UART_MCUX_FLEXCOMM
default y if HAS_MCUX_FLEXCOMM
depends on SERIAL
config I2C_MCUX_FLEXCOMM
default y if HAS_MCUX_FLEXCOMM
depends on I2C

4
soc/arm/nxp_kinetis/k2x/Kconfig.defconfig.mk22f12
View file

@ -49,10 +49,6 @@ config SOC_FLASH_MCUX
default y
depends on FLASH
config UART_MCUX
default y
depends on SERIAL
config USB_KINETIS
default y
depends on USB_DEVICE_DRIVER

4
soc/arm/nxp_kinetis/k6x/Kconfig.defconfig.mk64f12
View file

@ -64,10 +64,6 @@ config SOC_FLASH_MCUX
default y
depends on FLASH
config UART_MCUX
default y
depends on SERIAL
config USB_KINETIS
default y
depends on USB_DEVICE_DRIVER

9
soc/arm/nxp_kinetis/k6x/Kconfig.defconfig.mk66f18
View file

@ -61,10 +61,6 @@ config SOC_FLASH_MCUX
default y
depends on FLASH
config UART_MCUX
default y
depends on SERIAL
config USB_KINETIS
default y
depends on USB_DEVICE_DRIVER
@ -77,9 +73,4 @@ config COUNTER_MCUX_RTC
default y
depends on COUNTER
config UART_MCUX_LPUART
default y
depends on SERIAL
endif # SOC_MK66F18

4
soc/arm/nxp_kinetis/k8x/Kconfig.defconfig.series
View file

@ -52,10 +52,6 @@ config PWM_MCUX_FTM
default y
depends on PWM
config UART_MCUX_LPUART
default y
depends on SERIAL
config SPI_MCUX_DSPI
default y
depends on SPI

4
soc/arm/nxp_kinetis/ke1xf/Kconfig.defconfig.series
View file

@ -71,10 +71,6 @@ config SOC_FLASH_MCUX
default y
depends on FLASH
config UART_MCUX_LPUART
default y
depends on SERIAL
config I2C_MCUX_LPI2C
default y
depends on I2C

4
soc/arm/nxp_kinetis/kl2x/Kconfig.defconfig.mkl25z4
View file

@ -19,10 +19,6 @@ config CLOCK_CONTROL_MCUX_SIM
default y
depends on CLOCK_CONTROL
config UART_MCUX_LPSCI
default y
depends on SERIAL
config I2C_MCUX
default y
depends on I2C

4
soc/arm/nxp_kinetis/kv5x/Kconfig.defconfig.series
View file

@ -35,10 +35,6 @@ config PWM_MCUX_FTM
default y
depends on PWM
config UART_MCUX
default y
depends on SERIAL
config SPI_MCUX_DSPI
default y
depends on SPI

4
soc/arm/nxp_kinetis/kwx/Kconfig.defconfig.mkw2xd512
View file

@ -53,10 +53,6 @@ config SOC_FLASH_MCUX
default y
depends on FLASH
config UART_MCUX
default y
depends on SERIAL
config USB_KINETIS
default y
depends on USB_DEVICE_DRIVER

4
soc/arm/nxp_kinetis/kwx/Kconfig.defconfig.mkw40z4
View file

@ -18,10 +18,6 @@ config CLOCK_CONTROL_MCUX_SIM
default y
depends on CLOCK_CONTROL
config UART_MCUX_LPUART
default y
depends on SERIAL
config I2C_MCUX
default y
depends on I2C

4
soc/arm/nxp_kinetis/kwx/Kconfig.defconfig.mkw41z4
View file

@ -23,10 +23,6 @@ config COUNTER_MCUX_RTC
default y
depends on COUNTER
config UART_MCUX_LPUART
default y
depends on SERIAL
config I2C_MCUX
default y
depends on I2C

7
soc/arm/nxp_lpc/lpc11u6x/Kconfig.defconfig.series
View file

@ -31,13 +31,6 @@ config CLOCK_CONTROL_LPC11U6X
endif # CLOCK_CONTROL
if SERIAL
config UART_LPC11U6X
default y
endif # SERIAL
if I2C
config I2C_LPC11U6X

4
soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.lpc54114_m0
View file

@ -15,8 +15,4 @@ config PINMUX_MCUX_LPC
config GPIO
default n
config UART_MCUX_FLEXCOMM
default n
depends on SERIAL
endif # SOC_LPC54114_M0

4
soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.lpc54114_m4
View file

@ -12,10 +12,6 @@ config PINMUX_MCUX_LPC
default y
depends on PINMUX
config UART_MCUX_FLEXCOMM
default y
depends on SERIAL
config SOC_FLASH_LPC
default y
depends on FLASH

4
soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S06
View file

@ -12,10 +12,6 @@ config PINMUX_MCUX_LPC
default y
depends on PINMUX
config UART_MCUX_FLEXCOMM
default y
depends on SERIAL
config SOC_FLASH_MCUX
default y
depends on FLASH

4
soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S16
View file

@ -12,10 +12,6 @@ config PINMUX_MCUX_LPC
default y
depends on PINMUX
config UART_MCUX_FLEXCOMM
default y
depends on SERIAL
config SOC_FLASH_MCUX
default y
depends on FLASH

4
soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S28
View file

@ -12,10 +12,6 @@ config PINMUX_MCUX_LPC
default y
depends on PINMUX
config UART_MCUX_FLEXCOMM
default y
depends on SERIAL
config SOC_FLASH_MCUX
default y
depends on FLASH

4
soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S69_cpu0
View file

@ -12,10 +12,6 @@ config PINMUX_MCUX_LPC
default y
depends on PINMUX
config UART_MCUX_FLEXCOMM
default y
depends on SERIAL
config SOC_FLASH_MCUX
default y
depends on FLASH

4
soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S69_cpu1
View file

@ -18,8 +18,4 @@ config GPIO
config SERIAL
default n
config UART_MCUX_FLEXCOMM
default n
depends on SERIAL
endif # SOC_LPC55S69_CPU1

3
soc/arm/quicklogic_eos_s3/Kconfig.defconfig
View file

@ -14,9 +14,6 @@ config SYS_CLOCK_HW_CYCLES_PER_SEC
if SERIAL
config UART_PL011
default y
config UART_INTERRUPT_DRIVEN
default y

10
soc/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.efm32gg11b
View file

@ -7,16 +7,6 @@ config GPIO_GECKO
default y
depends on GPIO || LOG_BACKEND_SWO
if SERIAL
config UART_GECKO
default y
config LEUART_GECKO
default y
endif # SERIAL
config I2C_GECKO
default y
depends on I2C

4
soc/arm/silabs_exx32/efm32hg/Kconfig.defconfig.efm32hg
View file

@ -3,10 +3,6 @@
# Copyright (c) 2018 Marcio Montenegro
# SPDX-License-Identifier: Apache-2.0
config UART_GECKO
default y
depends on SERIAL
config I2C_GECKO
default y
depends on I2C

10
soc/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.efm32jg12b
View file

@ -3,16 +3,6 @@
# Copyright (c) 2019 Lemonbeat GmbH
# SPDX-License-Identifier: Apache-2.0
if SERIAL
config UART_GECKO
default y
config LEUART_GECKO
default y
endif # SERIAL
config I2C_GECKO
default y
depends on I2C

10
soc/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.efm32pg12b
View file

@ -3,16 +3,6 @@
# Copyright (c) 2018 Christian Taedcke
# SPDX-License-Identifier: Apache-2.0
if SERIAL
config UART_GECKO
default y
config LEUART_GECKO
default y
endif # SERIAL
config I2C_GECKO
default y
depends on I2C

10
soc/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.efm32pg1b
View file

@ -3,16 +3,6 @@
# Copyright (c) 2020 Rafael Dias Menezes
# SPDX-License-Identifier: Apache-2.0
if SERIAL
config UART_GECKO
default y
config LEUART_GECKO
default y
endif # SERIAL
config I2C_GECKO
default y
depends on I2C

4
soc/arm/silabs_exx32/efm32wg/Kconfig.defconfig.efm32wg
View file

@ -3,10 +3,6 @@
# Copyright (c) 2017 Christian Taedcke
# SPDX-License-Identifier: Apache-2.0
config UART_GECKO
default y
depends on SERIAL
config I2C_GECKO
default y
depends on I2C

4
soc/arm/silabs_exx32/efr32fg13p/Kconfig.defconfig.efr32fg13p
View file

@ -3,10 +3,6 @@
# Copyright (c) 2018 Christian Taedcke
# SPDX-License-Identifier: Apache-2.0
config UART_GECKO
default y
depends on SERIAL
config I2C_GECKO
default y
depends on I2C

4
soc/arm/silabs_exx32/efr32fg1p/Kconfig.defconfig.efr32fg1p
View file

@ -3,10 +3,6 @@
# Copyright (c) 2018 Christian Taedcke
# SPDX-License-Identifier: Apache-2.0
config UART_GECKO
default y
depends on SERIAL
config I2C_GECKO
default y
depends on I2C

10
soc/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.efr32mg12p
View file

@ -3,16 +3,6 @@
# Copyright (c) 2018 Diego Sueiro
# SPDX-License-Identifier: Apache-2.0
if SERIAL
config UART_GECKO
default y
config LEUART_GECKO
default y
endif # SERIAL
config I2C_GECKO
default y
depends on I2C

4
soc/arm/silabs_exx32/efr32mg21/Kconfig.defconfig.efr32mg21
View file

@ -7,10 +7,6 @@ config GPIO_GECKO
default y
depends on GPIO || LOG_BACKEND_SWO
config UART_GECKO
default y
depends on SERIAL
config I2C_GECKO
default y
depends on I2C

4
soc/arm/st_stm32/common/Kconfig.defconfig.series
View file

@ -29,10 +29,6 @@ config CLOCK_CONTROL_INIT_PRIORITY
default 1
depends on CLOCK_CONTROL
config UART_STM32
default y
depends on SERIAL
config PINMUX_STM32
default y
depends on PINMUX

4
soc/arm/ti_simplelink/cc13x2_cc26x2/Kconfig.defconfig.series
View file

@ -29,10 +29,6 @@ config ENTROPY_CC13XX_CC26XX_RNG
default y
depends on ENTROPY_GENERATOR
config UART_CC13XX_CC26XX
default y
depends on SERIAL
config I2C_CC13XX_CC26XX
default y
depends on I2C

4
soc/riscv/openisa_rv32m1/Kconfig.defconfig
View file

@ -122,10 +122,6 @@ config RV32M1_INTMUX_CHANNEL_7
endif # MULTI_LEVEL_INTERRUPTS
config UART_RV32M1_LPUART
default y
depends on SERIAL
config I2C_RV32M1_LPI2C
default y
depends on I2C

8
soc/riscv/riscv-ite/it8xxx2/Kconfig.defconfig.series
View file

@ -28,18 +28,10 @@ config SYS_CLOCK_HW_CYCLES_PER_SEC
config SYS_CLOCK_TICKS_PER_SEC
default 4096
config UART_NS16550
default y
depends on SERIAL
config UART_NS16550_WA_ISR_REENABLE_INTERRUPT
default y
depends on UART_NS16550
config UART_ITE_IT8XXX2
default y
depends on UART_NS16550
config RISCV_HAS_CPU_IDLE
default y