michaelh/zephyr
1
0
Fork 0
Code Releases Activity

soc: npcx7: add comments for macro funcs used for device tree files.

Browse source 
This CL adds more comments for each macro functions used for device tree
file for better explanations. It also changes all hex values in soc.c to
lower case.

Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
This commit is contained in:
Mulin Chao 2020-09-15 17:21:45 +08:00 • committed by Carles Cufí
commit 99c208f36a
7 changed files with 274 additions and 77 deletions
Download patch file Download diff file Expand all files Collapse all files

7
drivers/serial/uart_npcx.c
View file

@ -23,7 +23,7 @@ struct uart_npcx_config {
/* clock configuration */
struct npcx_clk_cfg clk_cfg;
/* int-mux configuration */
const struct npcx_wui wui_map;
const struct npcx_wui uart_rx_wui;
/* pinmux configuration */
const uint8_t alts_size;
const struct npcx_alt *alts_list;
@ -343,11 +343,11 @@ static int uart_npcx_init(const struct device *dev)
* Configure the UART wake-up event triggered from a falling edge
* on CR_SIN pin. No need for callback function.
*/
soc_miwu_interrupt_configure(&config->wui_map,
soc_miwu_interrupt_configure(&config->uart_rx_wui,
NPCX_MIWU_MODE_EDGE, NPCX_MIWU_TRIG_LOW);
/* Enable irq of interrupt-input module */
soc_miwu_irq_enable(&config->wui_map);
soc_miwu_irq_enable(&config->uart_rx_wui);
#endif
@ -390,6 +390,7 @@ static int uart_npcx_init(const struct device *dev)
NPCX_UART_IRQ_CONFIG_FUNC_INIT(inst) \
}, \
.clk_cfg = DT_NPCX_CLK_CFG_ITEM(inst), \
.uart_rx_wui = DT_NPCX_WUI_ITEM_BY_NAME(0, uart_rx), \
.alts_size = ARRAY_SIZE(uart_alts##inst), \
.alts_list = uart_alts##inst, \
}; \