michaelh/zephyr
1
0
Fork 0
Code Releases Activity

tests/drivers/gpio_basic_api: delay before checking pull effect

Browse source 
When checking the behavior of pull configurations delay long enough
for the signal to stabilize.  Checking without a sufficient delay may
indicate a false failure.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit is contained in:
Peter Bigot 2019-10-20 13:18:07 -05:00 • committed by Carles Cufí
commit 98a5dd5f25
1 changed files with 9 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

9
tests/drivers/gpio/gpio_basic_api/src/test_gpio_port.c
View file

@ -354,6 +354,11 @@ static int check_input_levels(void)
return TC_PASS;
}
/* Delay after pull input config to allow signal to settle. The value
* selected is conservative (higher than may be necessary).
*/
#define PULL_DELAY_US 100U
/* Verify that pull-up and pull-down work for a disconnected input. */
static int check_pulls(void)
{
@ -371,6 +376,7 @@ static int check_pulls(void)
"output disconnect failed");
rc = gpio_pin_configure(dev, PIN_IN, GPIO_INPUT | GPIO_PULL_UP);
k_busy_wait(PULL_DELAY_US);
if (rc == -ENOTSUP) {
TC_PRINT("pull-up not supported\n");
return TC_PASS;
@ -382,6 +388,7 @@ static int check_pulls(void)
"physical pull-up does not read high");
rc = gpio_pin_configure(dev, PIN_IN, GPIO_INPUT | GPIO_PULL_DOWN);
k_busy_wait(PULL_DELAY_US);
if (rc == -ENOTSUP) {
TC_PRINT("pull-down not supported\n");
return TC_PASS;
@ -394,6 +401,7 @@ static int check_pulls(void)
/* Test that pull is not affected by active level */
rc = gpio_pin_configure(dev, PIN_IN, GPIO_INPUT | GPIO_ACTIVE_LOW | GPIO_PULL_UP);
k_busy_wait(PULL_DELAY_US);
if (rc == -ENOTSUP) {
TC_PRINT("pull-up not supported\n");
return TC_PASS;
@ -407,6 +415,7 @@ static int check_pulls(void)
"logical pull-up reads true");
rc = gpio_pin_configure(dev, PIN_IN, GPIO_INPUT | GPIO_ACTIVE_LOW | GPIO_PULL_DOWN);
k_busy_wait(PULL_DELAY_US);
if (rc == -ENOTSUP) {
TC_PRINT("pull-up not supported\n");
return TC_PASS;