diff --git a/soc/nxp/imx/imx9/imx95/Kconfig b/soc/nxp/imx/imx9/imx95/Kconfig
index 6b4e22b89ff..60d1f424b0a 100644
--- a/soc/nxp/imx/imx9/imx95/Kconfig
+++ b/soc/nxp/imx/imx9/imx95/Kconfig
@@ -12,6 +12,7 @@ config SOC_MIMX9596_M7
 	select ARM_MPU
 	select SOC_LATE_INIT_HOOK
 	select HAS_MCUX
+	select HAS_MCUX_CACHE
 
 config SOC_MIMX9596_A55
 	select ARM64
diff --git a/soc/nxp/imx/imx9/imx95/Kconfig.defconfig.mimx95.m7 b/soc/nxp/imx/imx9/imx95/Kconfig.defconfig.mimx95.m7
index 663267f88d1..ee356a0ead0 100644
--- a/soc/nxp/imx/imx9/imx95/Kconfig.defconfig.mimx95.m7
+++ b/soc/nxp/imx/imx9/imx95/Kconfig.defconfig.mimx95.m7
@@ -48,4 +48,7 @@ config SYS_CLOCK_HW_CYCLES_PER_SEC
 config CACHE_MANAGEMENT
 	default y
 
+config ETH_NXP_IMX_MSGINTR
+	default 2
+
 endif # SOC_MIMX9596_M7
diff --git a/soc/nxp/imx/imx9/imx95/m7/soc.c b/soc/nxp/imx/imx9/imx95/m7/soc.c
index 7100428a149..bfafe47113f 100644
--- a/soc/nxp/imx/imx9/imx95/m7/soc.c
+++ b/soc/nxp/imx/imx9/imx95/m7/soc.c
@@ -5,6 +5,18 @@
  */
 
 #include <zephyr/cache.h>
+#include <zephyr/device.h>
+#include <zephyr/init.h>
+#include <zephyr/kernel.h>
+#include <zephyr/drivers/firmware/scmi/clk.h>
+#include <zephyr/drivers/firmware/scmi/power.h>
+#include <zephyr/dt-bindings/clock/imx95_clock.h>
+#include <zephyr/dt-bindings/power/imx95_power.h>
+#include <soc.h>
+
+/* SCMI power domain states */
+#define POWER_DOMAIN_STATE_ON  0x00000000
+#define POWER_DOMAIN_STATE_OFF 0x40000000
 
 void soc_late_init_hook(void)
 {
@@ -13,3 +25,56 @@ void soc_late_init_hook(void)
 	sys_cache_instr_enable();
 #endif /* CONFIG_CACHE_MANAGEMENT */
 }
+
+static int soc_init(void)
+{
+#if defined(CONFIG_ETH_NXP_IMX_NETC) && (DT_CHILD_NUM_STATUS_OKAY(DT_NODELABEL(netc)) != 0)
+	const struct device *clk_dev = DEVICE_DT_GET(DT_NODELABEL(scmi_clk));
+	struct scmi_protocol *proto = clk_dev->data;
+	struct scmi_clock_rate_config clk_cfg = {0};
+	struct scmi_power_state_config pwr_cfg = {0};
+	uint32_t power_state = POWER_DOMAIN_STATE_OFF;
+	uint64_t enetref_clk = 250000000; /* 250 MHz*/
+	int ret;
+
+	/* Power up NETCMIX */
+	pwr_cfg.domain_id = IMX95_PD_NETC;
+	pwr_cfg.power_state = POWER_DOMAIN_STATE_ON;
+
+	ret = scmi_power_state_set(&pwr_cfg);
+	if (ret) {
+		return ret;
+	}
+
+	while (power_state != POWER_DOMAIN_STATE_ON) {
+		ret = scmi_power_state_get(IMX95_PD_NETC, &power_state);
+		if (ret) {
+			return ret;
+		}
+	}
+
+	/* ENETREF clock init */
+	ret = scmi_clock_parent_set(proto, IMX95_CLK_ENETREF, IMX95_CLK_SYSPLL1_PFD0);
+	if (ret) {
+		return ret;
+	}
+
+	clk_cfg.flags = SCMI_CLK_RATE_SET_FLAGS_ROUNDS_AUTO;
+	clk_cfg.clk_id = IMX95_CLK_ENETREF;
+	clk_cfg.rate[0] = enetref_clk & 0xffffffff;
+	clk_cfg.rate[1] = (enetref_clk >> 32) & 0xffffffff;
+
+	ret = scmi_clock_rate_set(proto, &clk_cfg);
+	if (ret) {
+		return ret;
+	}
+#endif
+	return 0;
+}
+
+/*
+ * Because platform is using ARM SCMI, drivers like scmi, mbox etc. are
+ * initialized during PRE_KERNEL_1. Common init hooks is not able to use.
+ * SoC early init and board early init could be run during PRE_KERNEL_2 instead.
+ */
+SYS_INIT(soc_init, PRE_KERNEL_2, 0);