michaelh/zephyr
1
0
Fork 0
Code Releases Activity

spell: fix Kconfig help typos: /boards /drivers

Browse source 
Fix misspellings in Kconfig help text

Change-Id: I3ae28a5d23d8e266612114bc0eb8a6e158129dc7
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit is contained in:
David B. Kinder 2017-04-21 10:29:51 -07:00 • committed by Anas Nashif
commit 93e4d7258d
38 changed files with 96 additions and 96 deletions
Download patch file Download diff file Expand all files Collapse all files

2
boards/Kconfig
View file

@ -2,7 +2,7 @@
config BOARD_DEPRECATED config BOARD_DEPRECATED
string string
help help
This hidden option is set in the board configuation and indicates This hidden option is set in the board configuration and indicates
the Zephyr release that the board configuration will be removed. the Zephyr release that the board configuration will be removed.
When set, any build for that board will generate a clearly visible When set, any build for that board will generate a clearly visible
deprecation warning. deprecation warning.

8
boards/x86/galileo/Kconfig
View file

@ -14,28 +14,28 @@ config PINMUX_GALILEO_EXP0_NAME
depends on PINMUX && BOARD_GALILEO depends on PINMUX && BOARD_GALILEO
default "EXP0" default "EXP0"
help help
The name of the GPIO expander labelled as EXP0 in the schematic. The name of the GPIO expander labeled as EXP0 in the schematic.
config PINMUX_GALILEO_EXP1_NAME config PINMUX_GALILEO_EXP1_NAME
string "Name of the GPIO expander 1" string "Name of the GPIO expander 1"
depends on PINMUX && BOARD_GALILEO depends on PINMUX && BOARD_GALILEO
default "EXP1" default "EXP1"
help help
The name of the GPIO expander labelled as EXP1 in the schematic. The name of the GPIO expander labeled as EXP1 in the schematic.
config PINMUX_GALILEO_EXP2_NAME config PINMUX_GALILEO_EXP2_NAME
string "Name of the GPIO expander 2" string "Name of the GPIO expander 2"
depends on PINMUX && BOARD_GALILEO depends on PINMUX && BOARD_GALILEO
default "EXP2" default "EXP2"
help help
The name of the GPIO expander labelled as EXP2 in the schematic. The name of the GPIO expander labeled as EXP2 in the schematic.
config PINMUX_GALILEO_PWM0_NAME config PINMUX_GALILEO_PWM0_NAME
string "Name of the PWM LED expander 0" string "Name of the PWM LED expander 0"
depends on PINMUX && BOARD_GALILEO depends on PINMUX && BOARD_GALILEO
default "PWM0" default "PWM0"
help help
The name of the PWM LED expander labelled as PWM0 in the schematic. The name of the PWM LED expander labeled as PWM0 in the schematic.
config PINMUX_GALILEO_GPIO_DW_NAME config PINMUX_GALILEO_GPIO_DW_NAME
string "Name of the DesignWare GPIO" string "Name of the DesignWare GPIO"

6
drivers/adc/Kconfig
View file

@ -32,11 +32,11 @@ config SYS_LOG_ADC_LEVEL
- 1 ERROR, only write SYS_LOG_ERR - 1 ERROR, only write SYS_LOG_ERR
- 2 WARNING, write SYS_LOG_WRN in adition to previous level - 2 WARNING, write SYS_LOG_WRN in addition to previous level
- 3 INFO, write SYS_LOG_INF in adition to previous levels - 3 INFO, write SYS_LOG_INF in addition to previous levels
- 4 DEBUG, write SYS_LOG_DBG in adition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
config ADC_INIT_PRIORITY config ADC_INIT_PRIORITY
int int

4
drivers/bluetooth/hci/Kconfig
View file

@ -43,9 +43,9 @@ config BLUETOOTH_SPI
select SPI select SPI
help help
Supports Bluetooth ICs using SPI as the communication protocol. Supports Bluetooth ICs using SPI as the communication protocol.
HCI packets are sent and received as single Byte transferrs, HCI packets are sent and received as single Byte transfers,
prepended after a known header. Headers may vary per device, so prepended after a known header. Headers may vary per device, so
additional platform specific knowlege may need to be added as additional platform specific knowledge may need to be added as
devices are. devices are.
config BLUETOOTH_NO_DRIVER config BLUETOOTH_NO_DRIVER

4
drivers/bluetooth/nble/Kconfig
View file

@ -22,7 +22,7 @@ config NBLE
A fundamental assumption that the driver makes is that it is A fundamental assumption that the driver makes is that it is
run on an architecture with the same ABI (e.g. struct packing run on an architecture with the same ABI (e.g. struct packing
& endianess) as the nRF51 chip. The driver cannot be used on & endianness) as the nRF51 chip. The driver cannot be used on
any architecture that doesn't fulfill this requirement. any architecture that doesn't fulfill this requirement.
if NBLE if NBLE
@ -68,7 +68,7 @@ config BLUETOOTH_RX_STACK_SIZE
default value is sufficient for basic operation, but if the default value is sufficient for basic operation, but if the
application needs to do advanced things in its callbacks that application needs to do advanced things in its callbacks that
require extra stack space, this value can be increased to require extra stack space, this value can be increased to
accomodate for that. accommodate for that.
config BLUETOOTH_DEVICE_NAME config BLUETOOTH_DEVICE_NAME
string "Bluetooth device name" string "Bluetooth device name"

6
drivers/clock_control/Kconfig
View file

@ -34,11 +34,11 @@ config SYS_LOG_CLOCK_CONTROL_LEVEL
- 1 ERROR, only write SYS_LOG_ERR - 1 ERROR, only write SYS_LOG_ERR
- 2 WARNING, write SYS_LOG_WRN in adition to previous level - 2 WARNING, write SYS_LOG_WRN in addition to previous level
- 3 INFO, write SYS_LOG_INF in adition to previous levels - 3 INFO, write SYS_LOG_INF in addition to previous levels
- 4 DEBUG, write SYS_LOG_DBG in adition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
source "drivers/clock_control/Kconfig.nrf5" source "drivers/clock_control/Kconfig.nrf5"

4
drivers/console/Kconfig
View file

@ -88,7 +88,7 @@ config USB_UART_CONSOLE
Enable this option to use the USB UART for console output. The output Enable this option to use the USB UART for console output. The output
can be viewed from the USB host via /dev/ttyACM* port. Note that console can be viewed from the USB host via /dev/ttyACM* port. Note that console
inputs from the USB UART are not functional yet. Also since the USB inputs from the USB UART are not functional yet. Also since the USB
layer currently doesnt support multiple interfaces, this shouldnt be layer currently doesn't support multiple interfaces, this shouldn't be
selected in conjunction with say USB Mass Storage. selected in conjunction with say USB Mass Storage.
config RAM_CONSOLE config RAM_CONSOLE
@ -142,7 +142,7 @@ config IPM_CONSOLE_STACK_SIZE
depends on IPM_CONSOLE_RECEIVER depends on IPM_CONSOLE_RECEIVER
default 512 default 512
help help
Eack instance of the IPM console receiver driver creates a worker Each instance of the IPM console receiver driver creates a worker
thread to print out incoming messages from the remote CPU. Specify the thread to print out incoming messages from the remote CPU. Specify the
stack size for these threads here. stack size for these threads here.

12
drivers/console/Kconfig.telnet
View file

@ -15,8 +15,8 @@ menuconfig TELNET_CONSOLE
This option enables telnet as a network console service. It is for This option enables telnet as a network console service. It is for
now a very basic implementation of the telnet protocol. Currently, now a very basic implementation of the telnet protocol. Currently,
it is basically just a redirection of the Zephyr console through TCP. it is basically just a redirection of the Zephyr console through TCP.
It nicely works along with anothe console driver (like uart), twist It nicely works along with another console driver (like uart), twist
being that it will take over the output if only a successul being that it will take over the output if only a successful
connection to its port is done. connection to its port is done.
if TELNET_CONSOLE if TELNET_CONSOLE
@ -98,18 +98,18 @@ config SYS_LOG_TELNET_CONSOLE_LEVEL
- 1 ERROR, only write SYS_LOG_ERR - 1 ERROR, only write SYS_LOG_ERR
- 2 WARNING, write SYS_LOG_WRN in adition to previous level - 2 WARNING, write SYS_LOG_WRN in addition to previous level
- 3 INFO, write SYS_LOG_INF in adition to previous levels - 3 INFO, write SYS_LOG_INF in addition to previous levels
- 4 DEBUG, write SYS_LOG_DBG in adition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
config TELNET_CONSOLE_DEBUG_DEEP config TELNET_CONSOLE_DEBUG_DEEP
bool "Forward output to original console handler" bool "Forward output to original console handler"
depends on UART_CONSOLE depends on UART_CONSOLE
default n default n
help help
For telnet developpers only, this will forward each output to For telnet developers only, this will forward each output to
original console handler. So if by chance telnet seems silent, original console handler. So if by chance telnet seems silent,
at least things will be printed to original handler, usually at least things will be printed to original handler, usually
UART console. UART console.

6
drivers/crypto/Kconfig
View file

@ -28,11 +28,11 @@ config SYS_LOG_CRYPTO_LEVEL
- 1 ERROR, only write SYS_LOG_ERR - 1 ERROR, only write SYS_LOG_ERR
- 2 WARNING, write SYS_LOG_WRN in adition to previous level - 2 WARNING, write SYS_LOG_WRN in addition to previous level
- 3 INFO, write SYS_LOG_INF in adition to previous levels - 3 INFO, write SYS_LOG_INF in addition to previous levels
- 4 DEBUG, write SYS_LOG_DBG in adition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
config CRYPTO_TINYCRYPT_SHIM config CRYPTO_TINYCRYPT_SHIM
bool "Enable TinyCrypt shim driver [EXPERIMENTAL] " bool "Enable TinyCrypt shim driver [EXPERIMENTAL] "

4
drivers/crypto/Kconfig.ataes132a
View file

@ -11,14 +11,14 @@ config ATAES132A_DRV_NAME
depends on ATAES132A depends on ATAES132A
default "ataes132a" default "ataes132a"
help help
Name for the ATAES132A driver wich will be used for binding. Name for the ATAES132A driver which will be used for binding.
config ATAES132A_I2C_PORT_NAME config ATAES132A_I2C_PORT_NAME
string "I2C master controller port name" string "I2C master controller port name"
depends on ATAES132A depends on ATAES132A
default "I2C_0" default "I2C_0"
help help
Master I2C port name through wich ATAES132A chip is accessed. Master I2C port name through which ATAES132A chip is accessed.
config ATAES132A_I2C_ADDR config ATAES132A_I2C_ADDR
hex "ATAES132A I2C addess" hex "ATAES132A I2C addess"

12
drivers/dma/Kconfig
View file

@ -46,7 +46,7 @@ config DMA_0_RX_SUB_CHANNEL_ID
default 0 default 0
depends on DMA_STM32F4X depends on DMA_STM32F4X
help help
This configuartion is required to choose a valid sub-channel This configuration is required to choose a valid sub-channel
for communication from a peripheral/device. Not required for communication from a peripheral/device. Not required
for memory to memory comms. for memory to memory comms.
@ -55,7 +55,7 @@ config DMA_0_TX_SUB_CHANNEL_ID
default 0 default 0
depends on DMA_STM32F4X depends on DMA_STM32F4X
help help
This configuartion is required to choose a valid sub-channel This configuration is required to choose a valid sub-channel
for communication to a peripheral/device. Not required for communication to a peripheral/device. Not required
for memory to memory comms. for memory to memory comms.
@ -76,7 +76,7 @@ config DMA_1_RX_SUB_CHANNEL_ID
default 0 default 0
depends on DMA_STM32F4X depends on DMA_STM32F4X
help help
This configuartion is required to choose a valid sub-channel This configuration is required to choose a valid sub-channel
for communication from a peripheral/device. Not required for communication from a peripheral/device. Not required
for memory to memory comms. for memory to memory comms.
@ -85,7 +85,7 @@ config DMA_1_TX_SUB_CHANNEL_ID
default 0 default 0
depends on DMA_STM32F4X depends on DMA_STM32F4X
help help
This configuartion is required to choose a valid sub-channel This configuration is required to choose a valid sub-channel
for communication to a peripheral/device. Not required for communication to a peripheral/device. Not required
for memory to memory comms. for memory to memory comms.
@ -106,7 +106,7 @@ config DMA_2_RX_SUB_CHANNEL_ID
default 0 default 0
depends on DMA_STM32F4X depends on DMA_STM32F4X
help help
This configuartion is required to choose a valid sub-channel This configuration is required to choose a valid sub-channel
for communication from a peripheral/device. Not required for communication from a peripheral/device. Not required
for memory to memory comms. for memory to memory comms.
@ -115,7 +115,7 @@ config DMA_2_TX_SUB_CHANNEL_ID
default 0 default 0
depends on DMA_STM32F4X depends on DMA_STM32F4X
help help
This configuartion is required to choose a valid sub-channel This configuration is required to choose a valid sub-channel
for communication to a peripheral/device. Not required for communication to a peripheral/device. Not required
for memory to memory comms. for memory to memory comms.

6
drivers/ethernet/Kconfig
View file

@ -19,9 +19,9 @@ config SYS_LOG_ETHERNET_LEVEL
Levels are: Levels are:
0 OFF, do not write 0 OFF, do not write
1 ERROR, only write SYS_LOG_ERR 1 ERROR, only write SYS_LOG_ERR
2 WARNING, write SYS_LOG_WRN in adition to previous level 2 WARNING, write SYS_LOG_WRN in addition to previous level
3 INFO, write SYS_LOG_INF in adition to previous levels 3 INFO, write SYS_LOG_INF in addition to previous levels
4 DEBUG, write SYS_LOG_DBG in adition to previous levels 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
config ETH_INIT_PRIORITY config ETH_INIT_PRIORITY
int int

2
drivers/ethernet/Kconfig.enc28j60
View file

@ -38,7 +38,7 @@ config ETH_EN28J60_TIMEOUT
help help
Given timeout in milliseconds. Maximum amount of time Given timeout in milliseconds. Maximum amount of time
that the driver will wait from the IP stack to get that the driver will wait from the IP stack to get
a memory buffer before the ethernet frame is dropped. a memory buffer before the Ethernet frame is dropped.
config ETH_ENC28J60_0 config ETH_ENC28J60_0
bool "ENC28J60C Ethernet port 0" bool "ENC28J60C Ethernet port 0"

8
drivers/ethernet/Kconfig.sam_gmac
View file

@ -21,19 +21,19 @@ config ETH_SAM_GMAC_NAME
required by all driver API functions. Device name has to be unique. required by all driver API functions. Device name has to be unique.
config ETH_SAM_GMAC_BUF_RX_COUNT config ETH_SAM_GMAC_BUF_RX_COUNT
int "Network RX buffers pre-allocated by the SAM ETH driver" int "Network RX buffers preallocated by the SAM ETH driver"
default 18 default 18
help help
Number of network buffers that will be permanently allocated by the Number of network buffers that will be permanently allocated by the
Ethernet driver. These buffers are used in receive path. They are Ethernet driver. These buffers are used in receive path. They are
pre-alocated by the driver and made available to the GMAC module to be preallocated by the driver and made available to the GMAC module to be
filled in with incoming data. Their number has to be large enough to fit filled in with incoming data. Their number has to be large enough to fit
at least one complete Ethernet frame. SAM ETH driver will always allocate at least one complete Ethernet frame. SAM ETH driver will always allocate
that amount of buffers for itself thus reducing the NET_BUF_RX_COUNT that amount of buffers for itself thus reducing the NET_BUF_RX_COUNT
which is a total amount of RX data buffers used by the whole networking which is a total amount of RX data buffers used by the whole networking
stack. One has to ensure that NET_PKT_RX_COUNT is large enough to stack. One has to ensure that NET_PKT_RX_COUNT is large enough to
fit at least two ethernet frames: one being received by the GMAC module fit at least two Ethernet frames: one being received by the GMAC module
and the other being processed by the higer layer networking stack. and the other being processed by the higher layer networking stack.
config ETH_SAM_GMAC_IRQ_PRI config ETH_SAM_GMAC_IRQ_PRI
int "Interrupt priority" int "Interrupt priority"

6
drivers/flash/Kconfig
View file

@ -79,7 +79,7 @@ config SOC_FLASH_QMSI
depends on QMSI && FLASH depends on QMSI && FLASH
default n default n
help help
Enable QMSI quark flash driver. Enable QMSI Quark flash driver.
config SOC_FLASH_QMSI_DEV_NAME config SOC_FLASH_QMSI_DEV_NAME
string "QMSI flash device name" string "QMSI flash device name"
@ -100,13 +100,13 @@ config SOC_FLASH_QMSI_WAIT_STATES
depends on SOC_FLASH_QMSI depends on SOC_FLASH_QMSI
default 1 default 1
help help
Specify the number of wait states for quark flash. Specify the number of wait states for Quark flash.
config SOC_FLASH_QMSI_SYS_SIZE config SOC_FLASH_QMSI_SYS_SIZE
hex "SOC system flash size" hex "SOC system flash size"
depends on SOC_FLASH_QMSI depends on SOC_FLASH_QMSI
help help
Specify system flash size on the quark SOC. Specify system flash size on the Quark SOC.
config SOC_FLASH_QMSI_API_REENTRANCY config SOC_FLASH_QMSI_API_REENTRANCY
bool bool

6
drivers/gpio/Kconfig
View file

@ -29,11 +29,11 @@ config SYS_LOG_GPIO_LEVEL
- 1 ERROR, only write SYS_LOG_ERR - 1 ERROR, only write SYS_LOG_ERR
- 2 WARNING, write SYS_LOG_WRN in adition to previous level - 2 WARNING, write SYS_LOG_WRN in addition to previous level
- 3 INFO, write SYS_LOG_INF in adition to previous levels - 3 INFO, write SYS_LOG_INF in addition to previous levels
- 4 DEBUG, write SYS_LOG_DBG in adition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
source "drivers/gpio/Kconfig.dw" source "drivers/gpio/Kconfig.dw"

2
drivers/gpio/Kconfig.mmio32
View file

@ -12,5 +12,5 @@ config GPIO_MMIO32
memory-mapped i/o register using the same APIs as GPIO drivers. This memory-mapped i/o register using the same APIs as GPIO drivers. This
is useful when an SoC or board has registers that aren't part of a is useful when an SoC or board has registers that aren't part of a
GPIO IP block and these registers are used to control things that GPIO IP block and these registers are used to control things that
Zephyr normaly expects to be specified using a GPIO pin, e.g. for Zephyr normally expects to be specified using a GPIO pin, e.g. for
driving an LED, or chip-select line for an SPI device. driving an LED, or chip-select line for an SPI device.

6
drivers/gpio/Kconfig.pcal9535a
View file

@ -29,11 +29,11 @@ config SYS_LOG_GPIO_PCAL9535A_LEVEL
- 1 ERROR, only write SYS_LOG_ERR - 1 ERROR, only write SYS_LOG_ERR
- 2 WARNING, write SYS_LOG_WRN in adition to previous level - 2 WARNING, write SYS_LOG_WRN in addition to previous level
- 3 INFO, write SYS_LOG_INF in adition to previous levels - 3 INFO, write SYS_LOG_INF in addition to previous levels
- 4 DEBUG, write SYS_LOG_DBG in adition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
config GPIO_PCAL9535A_INIT_PRIORITY config GPIO_PCAL9535A_INIT_PRIORITY
int int

10
drivers/grove/Kconfig
View file

@ -26,9 +26,9 @@ config SYS_LOG_GROVE_LEVEL
Levels are: Levels are:
0 OFF, do not write 0 OFF, do not write
1 ERROR, only write SYS_LOG_ERR 1 ERROR, only write SYS_LOG_ERR
2 WARNING, write SYS_LOG_WRN in adition to previous level 2 WARNING, write SYS_LOG_WRN in addition to previous level
3 INFO, write SYS_LOG_INF in adition to previous levels 3 INFO, write SYS_LOG_INF in addition to previous levels
4 DEBUG, write SYS_LOG_DBG in adition to previous levels 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
config GROVE_LCD_RGB config GROVE_LCD_RGB
bool bool
@ -53,7 +53,7 @@ config GROVE_LIGHT_SENSOR
depends on SENSOR && GROVE && ADC && NEWLIB_LIBC depends on SENSOR && GROVE && ADC && NEWLIB_LIBC
default n default n
help help
Setting this value will enable dirver support for the Grove Light Setting this value will enable driver support for the Grove Light
Sensor. Sensor.
config GROVE_LIGHT_SENSOR_NAME config GROVE_LIGHT_SENSOR_NAME
@ -88,7 +88,7 @@ config GROVE_TEMPERATURE_SENSOR
depends on SENSOR && GROVE && ADC && NEWLIB_LIBC depends on SENSOR && GROVE && ADC && NEWLIB_LIBC
default n default n
help help
Setting this value will enable dirver support for the Grove Setting this value will enable driver support for the Grove
Temperature Sensor. Temperature Sensor.
config GROVE_TEMPERATURE_SENSOR_NAME config GROVE_TEMPERATURE_SENSOR_NAME

8
drivers/i2c/Kconfig
View file

@ -76,7 +76,7 @@ config I2C_NRF5
default n default n
help help
This option enables the I2C driver for Nordic Semiconductor nRF5 This option enables the I2C driver for Nordic Semiconductor nRF5
family porcessors. family processors.
config I2C_NRF5_GPIO_SCA_PIN config I2C_NRF5_GPIO_SCA_PIN
int "SCA Pin Number" int "SCA Pin Number"
@ -133,11 +133,11 @@ config SYS_LOG_I2C_LEVEL
- 1 ERROR, only write SYS_LOG_ERR - 1 ERROR, only write SYS_LOG_ERR
- 2 WARNING, write SYS_LOG_WRN in adition to previous level - 2 WARNING, write SYS_LOG_WRN in addition to previous level
- 3 INFO, write SYS_LOG_INF in adition to previous levels - 3 INFO, write SYS_LOG_INF in addition to previous levels
- 4 DEBUG, write SYS_LOG_DBG in adition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
config I2C_DW_SHARED_IRQ config I2C_DW_SHARED_IRQ
bool bool

6
drivers/ieee802154/Kconfig
View file

@ -48,11 +48,11 @@ config SYS_LOG_IEEE802154_DRIVER_LEVEL
- 1 ERROR, only write SYS_LOG_ERR - 1 ERROR, only write SYS_LOG_ERR
- 2 WARNING, write SYS_LOG_WRN in adition to previous level - 2 WARNING, write SYS_LOG_WRN in addition to previous level
- 3 INFO, write SYS_LOG_INF in adition to previous levels - 3 INFO, write SYS_LOG_INF in addition to previous levels
- 4 DEBUG, write SYS_LOG_DBG in adition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
source "drivers/ieee802154/Kconfig.cc2520" source "drivers/ieee802154/Kconfig.cc2520"

2
drivers/ieee802154/Kconfig.cc2520
View file

@ -42,7 +42,7 @@ config IEEE802154_CC2520_RX_STACK_SIZE
default 800 default 800
help help
This option sets the driver's stack size for its internal rx thread. This option sets the driver's stack size for its internal rx thread.
The default value should be sufficient, but in case it prooves to be The default value should be sufficient, but in case it proves to be
a too little one, this option makes it easy to play with the size. a too little one, this option makes it easy to play with the size.
config IEEE802154_CC2520_INIT_PRIO config IEEE802154_CC2520_INIT_PRIO

2
drivers/ieee802154/Kconfig.nrf5
View file

@ -85,6 +85,6 @@ config IEEE802154_NRF5_CCA_CORR_LIMIT
default 2 default 2
help help
Limit for occurrences above correlator threshold. When not equal to zero the Limit for occurrences above correlator threshold. When not equal to zero the
corrolator based signal detect is enabled. correlator based signal detect is enabled.
endif endif

2
drivers/pci/Kconfig
View file

@ -60,7 +60,7 @@ config PCI_DEBUG
prompt "Enable PCI debugging" prompt "Enable PCI debugging"
default n default n
help help
This options enables PCI debigging functions This options enables PCI debugging functions
endif endif

2
drivers/pinmux/Kconfig.stm32
View file

@ -9,7 +9,7 @@ config PINMUX_STM32
bool "Pinmux driver for STM32 MCUs" bool "Pinmux driver for STM32 MCUs"
depends on PINMUX && SOC_FAMILY_STM32 depends on PINMUX && SOC_FAMILY_STM32
help help
Enable pin multiplexter for STM32 MCUs Enable pin multiplexer for STM32 MCUs
config PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY config PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY
int "Device initialization priority STM32 pinmux" int "Device initialization priority STM32 pinmux"

6
drivers/pwm/Kconfig.k64
View file

@ -35,11 +35,11 @@ config SYS_LOG_PWM_K64_FTM_LEVEL
- 1 ERROR, only write SYS_LOG_ERR - 1 ERROR, only write SYS_LOG_ERR
- 2 WARNING, write SYS_LOG_WRN in adition to previous level - 2 WARNING, write SYS_LOG_WRN in addition to previous level
- 3 INFO, write SYS_LOG_INF in adition to previous levels - 3 INFO, write SYS_LOG_INF in addition to previous levels
- 4 DEBUG, write SYS_LOG_DBG in adition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
#### FTM0 ##### #### FTM0 #####

2
drivers/pwm/Kconfig.nrf5_sw
View file

@ -12,7 +12,7 @@ menuconfig PWM_NRF5_SW
default y default y
help help
Enable driver to utilize PWM on the Nordic Semiconductor nRF5x series. Enable driver to utilize PWM on the Nordic Semiconductor nRF5x series.
This implementation provides upto 3 pins using one HF timer, two PPI This implementation provides up to 3 pins using one HF timer, two PPI
channels per pin and one GPIOTE config per pin. channels per pin and one GPIOTE config per pin.
config PWM_NRF5_SW_0_DEV_NAME config PWM_NRF5_SW_0_DEV_NAME

8
drivers/sensor/ak8975/Kconfig
View file

@ -31,10 +31,10 @@ config AK8975_I2C_ADDR
help help
I2C address of the AK8975 sensor. Choose: I2C address of the AK8975 sensor. Choose:
- 0x0C if CAD1 connected to GND nad CAD0 is connected to GND - 0x0C if CAD1 connected to GND and CAD0 is connected to GND
- 0x0D if CAD1 connected to GND nad CAD0 is connected to VDD - 0x0D if CAD1 connected to GND and CAD0 is connected to VDD
- 0x0E if CAD1 connected to VDD nad CAD0 is connected to GND - 0x0E if CAD1 connected to VDD and CAD0 is connected to GND
- 0x0F if CAD1 connected to VDD nad CAD0 is connected to VDD - 0x0F if CAD1 connected to VDD and CAD0 is connected to VDD
If the AK8975 sensor is part of a MPU9159 chip, the I2C address If the AK8975 sensor is part of a MPU9159 chip, the I2C address
needs to be 0x0C. needs to be 0x0C.

2
drivers/sensor/bme280/Kconfig
View file

@ -134,7 +134,7 @@ choice
depends on BME280 depends on BME280
default BME280_STANDBY_1000MS default BME280_STANDBY_1000MS
help help
Select standby time between measeurements for the BME280 sensor. Select standby time between measurements for the BME280 sensor.
Higher values lead to lower power consumption. Higher values lead to lower power consumption.
config BME280_STANDBY_05MS config BME280_STANDBY_05MS
bool "0.5ms" bool "0.5ms"

2
drivers/sensor/bmg160/Kconfig
View file

@ -95,7 +95,7 @@ config BMG160_GPIO_PORT_NAME
depends on BMG160 && BMG160_TRIGGER depends on BMG160 && BMG160_TRIGGER
default "GPIO_0" default "GPIO_0"
help help
The gpio controller the interrupt pin is atteched to. The gpio controller the interrupt pin is attached to.
config BMG160_INT_PIN config BMG160_INT_PIN
hex "BMG160 INT PIN" hex "BMG160 INT PIN"

6
drivers/sensor/fxos8700/Kconfig
View file

@ -191,7 +191,7 @@ config FXOS8700_PULSE_TMLT
acceleration on the selected channel exceeding the specified acceleration on the selected channel exceeding the specified
threshold and the end when the channel acceleration goes back below threshold and the end when the channel acceleration goes back below
the specified threshold. The resolution depends upon the sample rate the specified threshold. The resolution depends upon the sample rate
(ODR) and the highpass filter configuration (ODR) and the high-pass filter configuration
(HP_FILTER_CUTOFF[pls_hpf_en]). For ODR=800 Hz and pls_hpf_en=0, the (HP_FILTER_CUTOFF[pls_hpf_en]). For ODR=800 Hz and pls_hpf_en=0, the
resolution is 0.625 ms/LSB. resolution is 0.625 ms/LSB.
@ -202,7 +202,7 @@ config FXOS8700_PULSE_LTCY
help help
The time interval that starts after the first pulse detection where The time interval that starts after the first pulse detection where
the pulse-detection function ignores the start of a new pulse. The the pulse-detection function ignores the start of a new pulse. The
resolution depends upon the sample rate (ODR) and the highpass filter resolution depends upon the sample rate (ODR) and the high-pass filter
configuration (HP_FILTER_CUTOFF[pls_hpf_en]). For ODR=800 Hz and configuration (HP_FILTER_CUTOFF[pls_hpf_en]). For ODR=800 Hz and
pls_hpf_en=0, the resolution is 1.25 ms/LSB. pls_hpf_en=0, the resolution is 1.25 ms/LSB.
@ -218,7 +218,7 @@ config FXOS8700_PULSE_WIND
time limit constraint specified by the PULSE_TMLT register, but the time limit constraint specified by the PULSE_TMLT register, but the
end of the double pulse need not finish within the time specified by end of the double pulse need not finish within the time specified by
the PULSE_WIND register. The resolution depends upon the sample rate the PULSE_WIND register. The resolution depends upon the sample rate
(ODR) and the highpass filter configuration (ODR) and the high-pass filter configuration
(HP_FILTER_CUTOFF[pls_hpf_en]). For ODR=800 Hz and pls_hpf_en=0, the (HP_FILTER_CUTOFF[pls_hpf_en]). For ODR=800 Hz and pls_hpf_en=0, the
resolution is 1.25 ms/LSB. resolution is 1.25 ms/LSB.

4
drivers/sensor/isl29035/Kconfig
View file

@ -97,7 +97,7 @@ choice
default ISL29035_MODE_ALS default ISL29035_MODE_ALS
help help
Sensing mode in which the ISL29035 will function. The chip can be Sensing mode in which the ISL29035 will function. The chip can be
configured either for either ambinet light or infrared sensing. configured either for either ambient light or infrared sensing.
config ISL29035_MODE_ALS config ISL29035_MODE_ALS
bool bool
@ -182,7 +182,7 @@ choice
depends on ISL29035 && ISL29035_TRIGGER depends on ISL29035 && ISL29035_TRIGGER
default ISL29035_INT_PERSIST_1 default ISL29035_INT_PERSIST_1
help help
Number of consecutive intergration cycles for which the data samples Number of consecutive integration cycles for which the data samples
need to remain outside the threshold window in order for the interrupt need to remain outside the threshold window in order for the interrupt
to be triggered. to be triggered.

6
drivers/shared_irq/Kconfig
View file

@ -20,7 +20,7 @@ config SHARED_IRQ_NUM_CLIENTS
prompt "The number of clients per instance" prompt "The number of clients per instance"
default 5 default 5
help help
Configures the maximum nuber of clients allowed per shared Configures the maximum number of clients allowed per shared
instance of the shared interrupt driver. To conserve RAM set instance of the shared interrupt driver. To conserve RAM set
this value to the lowest practical value. this value to the lowest practical value.
@ -56,7 +56,7 @@ config SHARED_IRQ_0_PRI
default 2 default 2
depends on SHARED_IRQ_0 depends on SHARED_IRQ_0
help help
Prioity of shared interrupt handler for the configured interrupt Priority of shared interrupt handler for the configured interrupt
choice choice
depends on SHARED_IRQ_0 depends on SHARED_IRQ_0
@ -108,7 +108,7 @@ config SHARED_IRQ_1_PRI
default 2 default 2
depends on SHARED_IRQ_1 depends on SHARED_IRQ_1
help help
Prioity of shared interrupt handler for the configured interrupt Priority of shared interrupt handler for the configured interrupt
choice choice
depends on SHARED_IRQ_1 depends on SHARED_IRQ_1

2
drivers/slip/Kconfig
View file

@ -83,7 +83,7 @@ config SLIP_MAC_ADDR
default "" default ""
help help
Specify a MAC address for the SLIP interface in the form of Specify a MAC address for the SLIP interface in the form of
six hex 8-bit chars separaed by colons (eg: six hex 8-bit chars separated by colons (e.g.:
aa:33:cc:22:e2:c0). The default is an empty string, which aa:33:cc:22:e2:c0). The default is an empty string, which
means the code will make 00:00:5E:00:53:XX, where XX will be means the code will make 00:00:5E:00:53:XX, where XX will be
random. random.

8
drivers/spi/Kconfig
View file

@ -40,7 +40,7 @@ config SPI_INTEL
default n default n
help help
Enable support for Intel's SPI controllers. Such controller Enable support for Intel's SPI controllers. Such controller
was formelly found on XScale chips. It can be found nowadays was formerly found on XScale chips. It can be found nowadays
on CEXXXX Intel media controller and Quark CPU (2 of them). on CEXXXX Intel media controller and Quark CPU (2 of them).
@ -62,9 +62,9 @@ config SYS_LOG_SPI_LEVEL
Levels are: Levels are:
0 OFF, do not write 0 OFF, do not write
1 ERROR, only write SYS_LOG_ERR 1 ERROR, only write SYS_LOG_ERR
2 WARNING, write SYS_LOG_WRN in adition to previous level 2 WARNING, write SYS_LOG_WRN in addition to previous level
3 INFO, write SYS_LOG_INF in adition to previous levels 3 INFO, write SYS_LOG_INF in addition to previous levels
4 DEBUG, write SYS_LOG_DBG in adition to previous levels 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
config SPI_CS_GPIO config SPI_CS_GPIO
bool "SPI port CS pin is controlled via a GPIO port" bool "SPI port CS pin is controlled via a GPIO port"

2
drivers/spi/Kconfig.dw
View file

@ -57,7 +57,7 @@ config SPI_DW_FIFO_DEPTH
int "Rx and Tx FIFO Depth" int "Rx and Tx FIFO Depth"
help help
Corresponds to the SSI_TX_FIFO_DEPTH and Corresponds to the SSI_TX_FIFO_DEPTH and
SSI_RX_FIFO_DEPTH of the DesignWare Syncrhonous SSI_RX_FIFO_DEPTH of the DesignWare Synchronous
Serial Interface. Depth ranges from 2-256. Serial Interface. Depth ranges from 2-256.
config SPI_DW_PORT_0_CLOCK_GATE_SUBSYS config SPI_DW_PORT_0_CLOCK_GATE_SUBSYS

2
drivers/spi/Kconfig.nrf5
View file

@ -13,7 +13,7 @@ menuconfig SPI_NRF5
default n default n
help help
Enable support for nRF52 MCU series EasyDMA SPI driver. Peripherals Enable support for nRF52 MCU series EasyDMA SPI driver. Peripherals
with the same instance id can not be used together. eg SPIM0 and I2C_0 with the same instance id can not be used together, e.g., SPIM0 and I2C_0
(TWIM0) and SPIS0. You may need to disable I2C_0 or I2C_1. (TWIM0) and SPIS0. You may need to disable I2C_0 or I2C_1.
if SPI_NRF5 if SPI_NRF5

6
drivers/usb/device/Kconfig
View file

@ -35,10 +35,10 @@ config SYS_LOG_USB_DW_LEVEL
- 1 ERROR, only write SYS_LOG_ERR - 1 ERROR, only write SYS_LOG_ERR
- 2 WARNING, write SYS_LOG_WRN in adition to previous level - 2 WARNING, write SYS_LOG_WRN in addition to previous level
- 3 INFO, write SYS_LOG_INF in adition to previous levels - 3 INFO, write SYS_LOG_INF in addition to previous levels
- 4 DEBUG, write SYS_LOG_DBG in adition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels
endif # USB endif # USB