michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: sai: add pinctrl support in mcux sai

Browse source 
enable i2s pinctrl

Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
This commit is contained in:
Hake Huang 2021-12-24 15:02:25 +08:00 • committed by David Leach
commit 8c5a4fc3b0
1 changed files with 28 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

30
drivers/i2s/i2s_mcux_sai.c
View file

@ -16,8 +16,10 @@
#include <device.h>
#include <init.h>
#include <drivers/dma.h>
#include <drivers/i2s.h>
#ifdef CONFIG_PINCTRL
#include <drivers/pinctrl.h>
#endif
#include <drivers/clock_control.h>
#include <dt-bindings/clock/imx_ccm.h>
#include <soc.h>
@ -78,6 +80,9 @@ struct i2s_mcux_config {
uint32_t tx_channel;
clock_control_subsys_t clk_sub_sys;
const struct device *ccm_dev;
#ifdef CONFIG_PINCTRL
const struct pinctrl_dev_config *pinctrl;
#endif
void (*irq_connect)(const struct device *dev);
bool rx_sync_mode;
bool tx_sync_mode;
@ -335,7 +340,6 @@ static void enable_mclk_direction(const struct device *dev, bool dir)
} else {
*gpr &= ~mask;
}
}
static void get_mclk_rate(const struct device *dev, uint32_t *mclk)
@ -969,6 +973,9 @@ static int i2s_mcux_initialize(const struct device *dev)
I2S_Type *base = (I2S_Type *)dev_cfg->base;
struct i2s_dev_data *dev_data = dev->data;
uint32_t mclk;
#ifdef CONFIG_PINCTRL
int err;
#endif
if (!dev_data->dev_dma) {
LOG_ERR("DMA device not found");
@ -987,6 +994,14 @@ static int i2s_mcux_initialize(const struct device *dev)
/* register ISR */
dev_cfg->irq_connect(dev);
/* pinctrl */
#ifdef CONFIG_PINCTRL
err = pinctrl_apply_state(dev_cfg->pinctrl, PINCTRL_STATE_DEFAULT);
if (err) {
LOG_ERR("mclk pinctrl setup failed (%d)", err);
return err;
}
#endif
/*clock configuration*/
audio_clock_settings(dev);
@ -1036,9 +1051,19 @@ static const struct i2s_driver_api i2s_mcux_driver_api = {
.trigger = i2s_mcux_trigger,
};
#ifdef CONFIG_PINCTRL
#define PINCTRL_DEFINE(i2s_id) PINCTRL_DT_INST_DEFINE(i2s_id);
#define PINCTRL_INIT(i2s_id) .pinctrl = PINCTRL_DT_INST_DEV_CONFIG_GET(i2s_id),
#else
#define PINCTRL_DEFINE(i2s_id)
#define PINCTRL_INIT(i2s_id)
#endif
#define I2S_MCUX_INIT(i2s_id) \
static void i2s_irq_connect_##i2s_id(const struct device *dev); \
\
PINCTRL_DEFINE(i2s_id) \
\
static const struct i2s_mcux_config i2s_##i2s_id##_config = { \
.base = (I2S_Type *)DT_INST_REG_ADDR(i2s_id), \
.clk_src = \
@ -1071,6 +1096,7 @@ static const struct i2s_driver_api i2s_mcux_driver_api = {
DT_INST_CLOCKS_CELL_BY_IDX(i2s_id, 0, name), \
.ccm_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(i2s_id)), \
.irq_connect = i2s_irq_connect_##i2s_id, \
PINCTRL_INIT(i2s_id) \
.tx_sync_mode = \
DT_INST_PROP(i2s_id, nxp_tx_sync_mode), \
.rx_sync_mode = \