michaelh/zephyr
1
0
Fork 0
Code Releases Activity

soc: nxp_imx: rt: remove unnecessary pinmux callbacks

Browse source 
All iMX RT 1xxx boards are now expected to use pin control, so the USDHC
pinmuxing callbacks can be removed.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit is contained in:
Daniel DeGrasse 2022-03-24 09:33:56 -05:00 • committed by David Leach
commit 8c115a26e0
3 changed files with 0 additions and 113 deletions
Download patch file Download diff file Expand all files Collapse all files

20
soc/arm/nxp_imx/rt/soc.h
View file

@ -20,26 +20,6 @@
extern "C" {
#endif
#if CONFIG_DISK_DRIVER_SDMMC && \
(DT_NODE_HAS_STATUS(DT_NODELABEL(usdhc1), okay) || \
DT_NODE_HAS_STATUS(DT_NODELABEL(usdhc2), okay))
typedef void (*usdhc_pin_cfg_cb)(uint16_t nusdhc, bool init,
uint32_t speed, uint32_t strength);
void imxrt_usdhc_pinmux(uint16_t nusdhc,
bool init, uint32_t speed, uint32_t strength);
void imxrt_usdhc_pinmux_cb_register(usdhc_pin_cfg_cb cb);
typedef void (*usdhc_dat3_cfg_cb)(bool pullup);
void imxrt_usdhc_dat3_cb_register(usdhc_dat3_cfg_cb cb);
void imxrt_usdhc_dat3_pull(bool pullup);
#endif
#if CONFIG_I2S_MCUX_SAI
void imxrt_audio_codec_pll_init(uint32_t clock_name, uint32_t clk_src,
uint32_t clk_pre_div, uint32_t clk_src_div);

46
soc/arm/nxp_imx/rt/soc_rt10xx.c
View file

@ -219,52 +219,6 @@ static ALWAYS_INLINE void clock_init(void)
}
#if (DT_NODE_HAS_STATUS(DT_NODELABEL(usdhc1), okay) && CONFIG_DISK_DRIVER_SDMMC)
/* Usdhc driver needs to re-configure pinmux
* Pinmux depends on board design.
* From the perspective of Usdhc driver,
* it can't access board specific function.
* So SoC provides this for board to register
* its usdhc pinmux and for usdhc to access
* pinmux.
*/
static usdhc_pin_cfg_cb g_usdhc_pin_cfg_cb;
void imxrt_usdhc_pinmux_cb_register(usdhc_pin_cfg_cb cb)
{
g_usdhc_pin_cfg_cb = cb;
}
void imxrt_usdhc_pinmux(uint16_t nusdhc, bool init,
uint32_t speed, uint32_t strength)
{
if (g_usdhc_pin_cfg_cb)
g_usdhc_pin_cfg_cb(nusdhc, init,
speed, strength);
}
/* Usdhc driver needs to reconfigure the dat3 line to a pullup in order to
* detect an SD card on the bus. Expose a callback to do that here. The board
* must register this callback in its init function.
*/
static usdhc_dat3_cfg_cb g_usdhc_dat3_cfg_cb;
void imxrt_usdhc_dat3_cb_register(usdhc_dat3_cfg_cb cb)
{
g_usdhc_dat3_cfg_cb = cb;
}
void imxrt_usdhc_dat3_pull(bool pullup)
{
if (g_usdhc_dat3_cfg_cb) {
g_usdhc_dat3_cfg_cb(pullup);
}
}
#endif
#if CONFIG_I2S_MCUX_SAI
void imxrt_audio_codec_pll_init(uint32_t clock_name, uint32_t clk_src,
uint32_t clk_pre_div, uint32_t clk_src_div)

47
soc/arm/nxp_imx/rt/soc_rt11xx.c
View file

@ -463,53 +463,6 @@ static ALWAYS_INLINE void clock_init(void)
#endif
}
#if DT_NODE_HAS_STATUS(DT_NODELABEL(usdhc1), okay) && CONFIG_DISK_DRIVER_SDMMC
/* Usdhc driver needs to re-configure pinmux
* Pinmux depends on board design.
* From the perspective of Usdhc driver,
* it can't access board specific function.
* So SoC provides this for board to register
* its usdhc pinmux and for usdhc to access
* pinmux.
*/
static usdhc_pin_cfg_cb g_usdhc_pin_cfg_cb;
void imxrt_usdhc_pinmux_cb_register(usdhc_pin_cfg_cb cb)
{
g_usdhc_pin_cfg_cb = cb;
}
void imxrt_usdhc_pinmux(uint16_t nusdhc, bool init,
uint32_t speed, uint32_t strength)
{
if (g_usdhc_pin_cfg_cb)
g_usdhc_pin_cfg_cb(nusdhc, init,
speed, strength);
}
/* Usdhc driver needs to reconfigure the dat3 line to a pullup in order to
* detect an SD card on the bus. Expose a callback to do that here. The board
* must register this callback in its init function.
*/
static usdhc_dat3_cfg_cb g_usdhc_dat3_cfg_cb;
void imxrt_usdhc_dat3_cb_register(usdhc_dat3_cfg_cb cb)
{
g_usdhc_dat3_cfg_cb = cb;
}
void imxrt_usdhc_dat3_pull(bool pullup)
{
if (g_usdhc_dat3_cfg_cb) {
g_usdhc_dat3_cfg_cb(pullup);
}
}
#endif
#if CONFIG_I2S_MCUX_SAI
void imxrt_audio_codec_pll_init(uint32_t clock_name, uint32_t clk_src,
uint32_t clk_pre_div, uint32_t clk_src_div)