michaelh/zephyr
1
0
Fork 0
Code Releases Activity

spell: fix comment typos: /include

Browse source 
Change-Id: I20d315ef5f8a2da5cfe28b194126907adda9e13c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit is contained in:
David B. Kinder 2017-04-18 15:56:26 -07:00 • committed by Anas Nashif
commit 8b986d7697
10 changed files with 37 additions and 37 deletions
Download patch file Download diff file Expand all files Collapse all files

10
include/gpio.h
View file

@ -133,7 +133,7 @@ extern "C" {
* when output is high.
*
* The DISCONNECT drive strength indicates that the pin is placed in a
* high impediance state and not driven, this option is used to
* high impedance state and not driven, this option is used to
* configure hardware that supports a open collector drive mode.
*
* The interface supports two different drive strengths:
@ -141,7 +141,7 @@ extern "C" {
* ALT - The highest drive strength supported by the HW
*
* On hardware that supports only one standard drive strength, both
* DFLT and ALT have the same behaviour.
* DFLT and ALT have the same behavior.
*
* On hardware that does not support a disconnect mode, DISCONNECT
* will behave the same as DFLT.
@ -425,8 +425,8 @@ static inline int gpio_port_configure(struct device *port, int flags)
*
* Write the output state of a port. The state of each pin is
* represented by one bit in the value. Pin 0 corresponds to the
* least signficiant bit, pin 31 corresponds to the most significant
* bit. For ports with less that 32 physical pins the most signficant
* least significant bit, pin 31 corresponds to the most significant
* bit. For ports with less that 32 physical pins the most significant
* bits which do not correspond to a physical pin are ignored.
*
* @param port Pointer to the device structure for the driver instance.
@ -445,7 +445,7 @@ static inline int gpio_port_write(struct device *port, uint32_t value)
*
* Read the input state of a port. The state of each pin is
* represented by one bit in the returned value. Pin 0 corresponds to
* the least signficiant bit, pin 31 corresponds to the most
* the least significant bit, pin 31 corresponds to the most
* significant bit. Unused bits for ports with less that 32 physical
* pins are returned as 0.
*