michaelh/zephyr
1
0
Fork 0
Code Releases Activity

Bluetooth: Controller: Kconfig: Move BT_LL_SW_SPLIT specific configs

Browse source 
These configs are very tied to the BT_LL_SW_SPLIT implementation,
so it makes sense that these are only visible when that link layer is
used.

For the ones that may be used by other controllers in the future,
a dependency has been added.

Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This commit is contained in:
Rubin Gerritsen 2023-07-10 15:26:15 +02:00 • committed by Carles Cufí
commit 88f161778a
2 changed files with 108 additions and 99 deletions
Download patch file Download diff file Expand all files Collapse all files

102
subsys/bluetooth/controller/Kconfig
View file

@ -142,31 +142,10 @@ config BT_CTLR_HCI_VS_BUILD_INFO
character is required at the beginning to separate it from the
already included information.
config BT_CTLR_AD_DATA_BACKUP
bool "Legacy AD Data backup"
depends on BT_PERIPHERAL || BT_CTLR_ADV_EXT
default y
help
Backup Legacy Advertising Data when switching to Legacy Directed or
to Extended Advertising mode, and restore it when switching back to
Legacy Non-Directed Advertising mode.
Application can disable this feature if not using Directed
Advertising or switch between Legacy and Extended Advertising.
config BT_CTLR_HCI_ADV_HANDLE_MAPPING
bool "Advertising set handle mapping between HCI and LL"
depends on BT_CTLR_ADV_EXT
default y if BT_HCI_RAW
help
Enable mapping of advertising set handles between HCI and LL when
using external host since it can use arbitrary numbers as set handles
(as defined by Core specification) as opposed to LL which always uses
zero-based numbering. When using with Zephyr host this option can be
disabled to remove extra mapping logic.
config BT_CTLR_DUP_FILTER_LEN
int "Number of addresses in the scan duplicate filter"
depends on BT_OBSERVER
depends on BT_LL_SW_SPLIT
default 16
help
Set the number of unique BLE addresses that can be filtered as
@ -175,32 +154,16 @@ config BT_CTLR_DUP_FILTER_LEN
config BT_CTLR_DUP_FILTER_ADV_SET_MAX
int "Number of Extended Advertising Sets in the scan duplicate filter"
depends on BT_OBSERVER && BT_CTLR_ADV_EXT && (BT_CTLR_DUP_FILTER_LEN > 0)
depends on BT_LL_SW_SPLIT
range 1 16
default 1
help
Set the number of unique Advertising Set ID per Bluetooth Low Energy
addresses that can be filtered as duplicates while Extended Scanning.
config BT_CTLR_MESH_SCAN_FILTERS
int "Number of Mesh scan filters"
depends on BT_HCI_MESH_EXT
default 1
range 1 15
help
Set the number of unique Mesh Scan Filters available as part of
the Intel Mesh Vendor Specific Extensions.
config BT_CTLR_MESH_SF_PATTERNS
int "Number of Mesh scan filter patterns"
depends on BT_HCI_MESH_EXT
default 15
range 1 15
help
Set the number of unique Mesh Scan Filter patterns available per
Scan Filter as part of the Intel Mesh Vendor Specific Extensions.
config BT_CTLR_RX_BUFFERS
int "Number of Rx buffers"
depends on BT_LL_SW_SPLIT
default 6 if BT_HCI_RAW
default 1
range 1 18
@ -530,10 +493,6 @@ config BT_CTLR_CONN_RSSI
help
Enable connection RSSI measurement.
config BT_CTLR_CHECK_SAME_PEER_CONN
bool
default BT_MAX_CONN > 1 && !BT_CTLR_ALLOW_SAME_PEER_CONN
endif # BT_CONN
config BT_CTLR_FILTER_ACCEPT_LIST
@ -644,22 +603,6 @@ config BT_CTLR_ADV_DATA_LEN_MAX
help
Maximum Extended Advertising Data Length.
config BT_CTLR_ADV_EXT_RX_PDU_LEN_MAX
int "Maximum Advertising Extensions Receive PDU Length"
depends on BT_OBSERVER
range 255 255 if BT_HCI_RAW
range 31 255
default 255
help
Maximum Advertising Extensions Receive PDU Length.
config BT_CTLR_SCAN_DATA_LEN_MAX
int "Maximum Extended Scanning Data Length"
depends on BT_OBSERVER
range 31 1650
help
Maximum Extended Scanning Data Length.
config BT_CTLR_ADV_PERIODIC
bool "LE Periodic Advertising in Advertising State"
depends on BT_BROADCASTER && BT_CTLR_ADV_PERIODIC_SUPPORT
@ -748,11 +691,6 @@ config BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
Enable filtering of periodic advertisements depending on type of
Constant Tone Extension.
config BT_CTLR_CHECK_SAME_PEER_SYNC
# Hidden Kconfig to add same peer synchronization check
bool
default BT_PER_ADV_SYNC_MAX > 1
config BT_CTLR_SYNC_TRANSFER_RECEIVER
bool "Periodic Advertising Sync Transfer receiver"
depends on BT_CTLR_SYNC_TRANSFER_RECEIVER_SUPPORT
@ -931,13 +869,6 @@ config BT_CTLR_CONN_ISO_STREAMS_PER_GROUP
help
Maximum supported CISes per CIG.
config BT_CTLR_CONN_ISO_HCI_DATAPATH_SKIP_INVALID_DATA
bool "Do not pass invalid SDUs on HCI datapath"
depends on BT_CTLR_CONN_ISO
help
This allows for applications to decide whether to
forward invalid SDUs through HCI upwards.
config BT_CTLR_CONN_ISO_PDU_LEN_MAX
int "Maximum Connected Isochronous Channel PDU Length"
depends on BT_CTLR_CONN_ISO
@ -963,28 +894,6 @@ config BT_CTLR_CONN_ISO_STREAMS_MAX_NSE
help
Maximum number of CIS subevents.
choice
prompt "CIS Creation Policy Selection"
default BT_CTLR_CONN_ISO_RELIABILITY_POLICY
config BT_CTLR_CONN_ISO_RELIABILITY_POLICY
bool "CIS creation policy for reliability"
depends on BT_CTLR_CENTRAL_ISO
help
Select this option to use reliability policy for CIS creation. This
favors a CIS layout/configuration which utilizes the full range of the
Max_Transmission_Latency for maximum retransmission and payload
recovery.
config BT_CTLR_CONN_ISO_LOW_LATENCY_POLICY
bool "CIS creation policy for low latency"
depends on BT_CTLR_CENTRAL_ISO
help
Select this option to use low latency policy for CIS creation. This
favors a CIS layout/configuration which compacts payload transmission
for lowest possible latency.
endchoice
config BT_CTLR_ISO
bool
default BT_CTLR_BROADCAST_ISO || BT_CTLR_CONN_ISO
@ -1033,11 +942,6 @@ config BT_CTLR_ASSERT_HANDLER
and will be invoked whenever the controller code encounters
an unrecoverable error.
config BT_CTLR_TEST
bool "Run in-system unit tests"
help
Run in-system unit tests
endif # BT_CTLR
config BT_CTLR_DEBUG_PINS_CPUAPP

105
subsys/bluetooth/controller/Kconfig.ll_sw_split
View file

@ -133,11 +133,116 @@ config BT_CTLR_SUBVERSION_NUMBER
help
Set the Subversion Number that will be used in VERSION_IND PDU.
config BT_CTLR_AD_DATA_BACKUP
bool "Legacy AD Data backup"
depends on BT_PERIPHERAL || BT_CTLR_ADV_EXT
default y
help
Backup Legacy Advertising Data when switching to Legacy Directed or
to Extended Advertising mode, and restore it when switching back to
Legacy Non-Directed Advertising mode.
Application can disable this feature if not using Directed
Advertising or switch between Legacy and Extended Advertising.
config BT_CTLR_HCI_ADV_HANDLE_MAPPING
bool "Advertising set handle mapping between HCI and LL"
depends on BT_CTLR_ADV_EXT
default y if BT_HCI_RAW
help
Enable mapping of advertising set handles between HCI and LL when
using external host since it can use arbitrary numbers as set handles
(as defined by Core specification) as opposed to LL which always uses
zero-based numbering. When using with Zephyr host this option can be
disabled to remove extra mapping logic.
config BT_CTLR_MESH_SCAN_FILTERS
int "Number of Mesh scan filters"
depends on BT_HCI_MESH_EXT
default 1
range 1 15
help
Set the number of unique Mesh Scan Filters available as part of
the Intel Mesh Vendor Specific Extensions.
config BT_CTLR_MESH_SF_PATTERNS
int "Number of Mesh scan filter patterns"
depends on BT_HCI_MESH_EXT
default 15
range 1 15
help
Set the number of unique Mesh Scan Filter patterns available per
Scan Filter as part of the Intel Mesh Vendor Specific Extensions.
config BT_CTLR_CHECK_SAME_PEER_CONN
bool
depends on BT_CONN
default BT_MAX_CONN > 1 && !BT_CTLR_ALLOW_SAME_PEER_CONN
if BT_CTLR_ADV_EXT
config BT_CTLR_ADV_EXT_RX_PDU_LEN_MAX
int "Maximum Advertising Extensions Receive PDU Length"
depends on BT_OBSERVER
range 255 255 if BT_HCI_RAW
range 31 255
default 255
help
Maximum Advertising Extensions Receive PDU Length.
config BT_CTLR_SCAN_DATA_LEN_MAX
int "Maximum Extended Scanning Data Length"
depends on BT_OBSERVER
range 31 1650
help
Maximum Extended Scanning Data Length.
config BT_CTLR_CHECK_SAME_PEER_SYNC
# Hidden Kconfig to add same peer synchronization check
bool
depends on BT_CTLR_SYNC_PERIODIC
default BT_PER_ADV_SYNC_MAX > 1
endif # BT_CTLR_ADV_EXT
config BT_CTLR_CONN_ISO_HCI_DATAPATH_SKIP_INVALID_DATA
bool "Do not pass invalid SDUs on HCI datapath"
depends on BT_CTLR_CONN_ISO
help
This allows for applications to decide whether to
forward invalid SDUs through HCI upwards.
config BT_CTLR_ADVANCED_FEATURES
bool "Show advanced features"
help
Makes advanced features visible to controller developers.
choice
prompt "CIS Creation Policy Selection"
default BT_CTLR_CONN_ISO_RELIABILITY_POLICY
config BT_CTLR_CONN_ISO_RELIABILITY_POLICY
bool "CIS creation policy for reliability"
depends on BT_CTLR_CENTRAL_ISO
help
Select this option to use reliability policy for CIS creation. This
favors a CIS layout/configuration which utilizes the full range of the
Max_Transmission_Latency for maximum retransmission and payload
recovery.
config BT_CTLR_CONN_ISO_LOW_LATENCY_POLICY
bool "CIS creation policy for low latency"
depends on BT_CTLR_CENTRAL_ISO
help
Select this option to use low latency policy for CIS creation. This
favors a CIS layout/configuration which compacts payload transmission
for lowest possible latency.
endchoice
config BT_CTLR_TEST
bool "Run in-system unit tests"
help
Run in-system unit tests
menu "Advanced features"
visible if BT_CTLR_ADVANCED_FEATURES