diff --git a/include/lorawan/lorawan.h b/include/lorawan/lorawan.h
new file mode 100644
index 00000000000..5750d67ff9d
--- /dev/null
+++ b/include/lorawan/lorawan.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (c) 2020 Manivannan Sadhasivam <mani@kernel.org>
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#ifndef ZEPHYR_INCLUDE_LORAWAN_LORAWAN_H_
+#define ZEPHYR_INCLUDE_LORAWAN_LORAWAN_H_
+
+/**
+ * @file
+ * @brief Public LoRaWAN APIs
+ */
+
+#include <device.h>
+
+/**
+ * @brief LoRaWAN class types.
+ */
+enum lorawan_class {
+	LORAWAN_CLASS_A = 0x00,
+	LORAWAN_CLASS_B = 0x01,
+	LORAWAN_CLASS_C = 0x02,
+};
+
+/**
+ * @brief LoRaWAN activation types.
+ */
+enum lorawan_act_type {
+	LORAWAN_ACT_OTAA = 0,
+	LORAWAN_ACT_ABP,
+};
+
+/**
+ * @brief LoRaWAN datarate types.
+ */
+enum lorawan_datarate {
+	LORAWAN_DR_0 = 0,
+	LORAWAN_DR_1,
+	LORAWAN_DR_2,
+	LORAWAN_DR_3,
+	LORAWAN_DR_4,
+	LORAWAN_DR_5,
+	LORAWAN_DR_6,
+	LORAWAN_DR_7,
+	LORAWAN_DR_8,
+	LORAWAN_DR_9,
+	LORAWAN_DR_10,
+	LORAWAN_DR_11,
+	LORAWAN_DR_12,
+	LORAWAN_DR_13,
+	LORAWAN_DR_14,
+	LORAWAN_DR_15,
+};
+
+/**
+ * @brief LoRaWAN message types.
+ *
+ * Note: The default message type is unconfirmed.
+ */
+enum lorawan_message_type {
+	LORAWAN_MSG_CONFIRMED = BIT(0),
+};
+
+/**
+ * @brief LoRaWAN join parameters for over-the-Air activation (OTAA)
+ *
+ * Note that all of the fields use LoRaWAN 1.1 terminology.
+ *
+ * All parameters are optional if a secure element is present in which
+ * case the values stored in the secure element will be used instead.
+ */
+struct lorawan_join_otaa {
+	uint8_t *join_eui;
+	uint8_t *nwk_key;
+	uint8_t *app_key;
+};
+
+struct lorawan_join_abp {
+	/** Device address on the network */
+	uint32_t dev_addr;
+	/** Application session key */
+	uint8_t *app_skey;
+	/** Network session key */
+	uint8_t *nwk_skey;
+	/** Application EUI */
+	uint8_t *app_eui;
+};
+
+struct lorawan_join_config {
+	union {
+		struct lorawan_join_otaa otaa;
+		struct lorawan_join_abp abp;
+	};
+
+	/** Device EUI. Optional if a secure element is present. */
+	uint8_t *dev_eui;
+
+	enum lorawan_act_type mode;
+};
+
+/**
+ * @brief Join the LoRaWAN network
+ *
+ * Join the LoRaWAN network using OTAA or AWB.
+ *
+ * @param config Configuration to be used
+ *
+ * @return 0 if successful, negative errno code if failure
+ */
+int lorawan_join(const struct lorawan_join_config *config);
+
+/**
+ * @brief Start the LoRaWAN stack
+ *
+ * This function need to be called before joining the network.
+ *
+ * @return 0 if successful, negative errno code if failure
+ */
+int lorawan_start(void);
+
+/**
+ * @brief Send data to the LoRaWAN network
+ *
+ * Send data to the connected LoRaWAN network.
+ *
+ * @param port       Port to be used for sending data. Must be set if the
+ *                   payload is not empty.
+ * @param data       Data buffer to be sent
+ * @param len        Length of the buffer to be sent. Maximum length of this
+ *                   buffer is 255 bytes but the actual payload size varies with
+ *                   region and datarate.
+ * @param flags      Flag used to determine the type of message being sent. It
+ *                   could be one of the lorawan_message_type. The default
+ *                   behaviour is unconfirmed message.
+ *
+ * @return 0 if successful, negative errno code if failure
+ */
+int lorawan_send(uint8_t port, uint8_t *data, uint8_t len, uint8_t flags);
+
+/**
+ * @brief Set the current device class
+ *
+ * Change the current device class. This function may be called before
+ * or after a network connection has been established.
+ *
+ * @param dev_class New device class
+ *
+ * @return 0 if successful, negative errno code if failure
+ */
+int lorawan_set_class(enum lorawan_class dev_class);
+
+/**
+ * @brief Set the number of tries used for transmissions
+ *
+ * @param tries Number of tries to be used
+ *
+ * @return 0 if successful, negative errno code if failure
+ */
+int lorawan_set_conf_msg_tries(uint8_t tries);
+
+/**
+ * @brief Enable Adaptive Data Rate (ADR)
+ *
+ * Control whether adaptive data rate (ADR) is enabled. When ADR is enabled,
+ * the data rate is treated as a default data rate that wil be used if the
+ * ADR algorithm has not established a data rate. ADR should normally only
+ * be enabled for devices with stable RF conditions (i.e., devices in a mostly
+ * static location).
+ *
+ * @param enable Enable or Disable adaptive data rate.
+ */
+void lorawan_enable_adr(bool enable);
+
+/**
+ * @brief Set the default data rate
+ *
+ * Change the default data rate.
+ *
+ * @param dr Data rate used for transmissions
+ *
+ * @return 0 if successful, negative errno code if failure
+ */
+int lorawan_set_datarate(enum lorawan_datarate dr);
+
+#endif	/* ZEPHYR_INCLUDE_LORAWAN_LORAWAN_H_ */