michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: imx91_evk: add JLink runner support

Browse source 
Use JLink runner to flash and debug on i.MX91 EVK.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
This commit is contained in:
Jiafei Pan 2025-04-28 11:21:45 +08:00 • committed by Benjamin Cabé
commit 84fce99b5e
2 changed files with 55 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

8
boards/nxp/imx91_evk/board.cmake Normal file
View file

@ -0,0 +1,8 @@
#
# Copyright 2025 NXP
#
# SPDX-License-Identifier: Apache-2.0
board_runner_args(jlink "--device=MIMX9131" "--no-reset" "--flash-sram")
include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)

47
boards/nxp/imx91_evk/doc/index.rst
View file

@ -72,6 +72,53 @@ CPU's UART1 for A55 core.
Programming and Debugging Programming and Debugging
******************************* *******************************
.. zephyr:board-supported-runners::
There are multiple methods to program and debug Zephyr
Option 1. Boot Zephyr by Using JLink Runner
===========================================
The default runner for the board is JLink, connect the EVK board's JTAG connector to
the host computer using a J-Link debugger, power up the board and stop the board at
U-Boot command line.
Then use "west flash" or "west debug" command to load the zephyr.bin
image from the host computer and start the Zephyr application on A55 core0.
Flash and Run
-------------
Here is an example for the :zephyr:code-sample:`hello_world` application.
.. zephyr-app-commands::
:zephyr-app: samples/hello_world
:host-os: unix
:board: imx91_evk/mimx9131
:goals: flash
Then the following log could be found on UART1 console:
.. code-block:: console
*** Booting Zephyr OS build v4.1.0-3063-g2c7ef313ac38 ***
Hello World! imx91_evk/mimx9131
Debug
-----
Here is an example for the :zephyr:code-sample:`hello_world` application.
.. zephyr-app-commands::
:zephyr-app: samples/hello_world
:host-os: unix
:board: imx91_evk/mimx9131
:goals: debug
Option 2. Boot Zephyr by Using U-Boot Command
=============================================
U-Boot "go" command is used to load and kick Zephyr to Cortex-A55 Core. U-Boot "go" command is used to load and kick Zephyr to Cortex-A55 Core.
Copy the compiled ``zephyr.bin`` to the first FAT partition of the SD card and Copy the compiled ``zephyr.bin`` to the first FAT partition of the SD card and