diff --git a/boards/arm/nrf52_pca20020/nrf52_pca20020.dts b/boards/arm/nrf52_pca20020/nrf52_pca20020.dts
index 57273bebc93..8bfeed375d3 100644
--- a/boards/arm/nrf52_pca20020/nrf52_pca20020.dts
+++ b/boards/arm/nrf52_pca20020/nrf52_pca20020.dts
@@ -110,6 +110,9 @@
 		compatible = "ams,ccs811";
 		reg = <0x5a>;
 		label = "CCS811";
+		irq-gpios = <&gpio0 22 0>;
+		reset-gpios = <&sx1509b 11 0>;
+		wake-gpios = <&sx1509b 12 0>;
 	};
 };
 
diff --git a/drivers/sensor/ccs811/Kconfig b/drivers/sensor/ccs811/Kconfig
index 9f0bd6bb82f..51b369c0c1f 100644
--- a/drivers/sensor/ccs811/Kconfig
+++ b/drivers/sensor/ccs811/Kconfig
@@ -3,45 +3,8 @@
 # Copyright (c) 2018 Linaro Ltd.
 # SPDX-License-Identifier: Apache-2.0
 
-menuconfig CCS811
+config CCS811
 	bool "CCS811 Digital Gas Sensor"
 	depends on I2C && HAS_DTS_I2C
 	help
 	  Enable driver for CCS811 Gas sensors.
-
-if CCS811
-
-config CCS811_GPIO_DEV_NAME
-	string "GPIO device"
-	default "GPIOC"
-	help
-	  The device name of the GPIO device to which the CCS811 WAKE
-	  pin is connected.
-
-config CCS811_GPIO_WAKEUP
-	bool "Enable GPIO Wakeup for CCS811"
-	help
-	  Enable GPIO Wakeup support for CCS811
-
-config CCS811_GPIO_WAKEUP_PIN_NUM
-	int "GPIO Wakeup pin number"
-	default 0
-	depends on CCS811_GPIO_WAKEUP
-	help
-	  The number of the GPIO pin on which the WAKE pin of CCS811
-	  is connected
-
-config CCS811_GPIO_RESET
-	bool "Enable GPIO Reset for CCS811"
-	help
-	  Enable GPIO Reset support for CCS811
-
-config CCS811_GPIO_RESET_PIN_NUM
-	int "GPIO Reset pin number"
-	default 0
-	depends on CCS811_GPIO_RESET
-	help
-	  The number of the GPIO pin on which the RESET pin of CCS811
-	  is connected
-
-endif # CCS811
diff --git a/drivers/sensor/ccs811/ccs811.c b/drivers/sensor/ccs811/ccs811.c
index cdc95bbea42..2d8dbc38cc0 100644
--- a/drivers/sensor/ccs811/ccs811.c
+++ b/drivers/sensor/ccs811/ccs811.c
@@ -165,19 +165,31 @@ int ccs811_init(struct device *dev)
 		return -EINVAL;
 	}
 
-#if defined(CONFIG_CCS811_GPIO_WAKEUP) || defined(CONFIG_CCS811_GPIO_RESET)
-	drv_data->gpio = device_get_binding(CONFIG_CCS811_GPIO_DEV_NAME);
-	if (drv_data->gpio == NULL) {
+#ifdef DT_INST_0_AMS_CCS811_WAKE_GPIOS_CONTROLLER
+	drv_data->gpio_wakeup =
+		device_get_binding(DT_INST_0_AMS_CCS811_WAKE_GPIOS_CONTROLLER);
+	if (drv_data->gpio_wakeup == NULL) {
 		LOG_ERR("Failed to get pointer to %s device!",
-			    CONFIG_CCS811_GPIO_DEV_NAME);
+			DT_INST_0_AMS_CCS811_WAKE_GPIOS_CONTROLLER);
 		return -EINVAL;
 	}
 #endif
 
-#ifdef CONFIG_CCS811_GPIO_RESET
-	gpio_pin_configure(drv_data->gpio, CONFIG_CCS811_GPIO_RESET_PIN_NUM,
+#ifdef DT_INST_0_AMS_CCS811_RESET_GPIOS_CONTROLLER
+	drv_data->gpio_reset =
+		device_get_binding(DT_INST_0_AMS_CCS811_RESET_GPIOS_CONTROLLER);
+	if (drv_data->gpio_reset == NULL) {
+		LOG_ERR("Failed to get pointer to %s device!",
+			DT_INST_0_AMS_CCS811_RESET_GPIOS_CONTROLLER);
+		return -EINVAL;
+	}
+#endif
+#ifdef DT_INST_0_AMS_CCS811_RESET_GPIOS_CONTROLLER
+	gpio_pin_configure(drv_data->gpio_reset,
+			   DT_INST_0_AMS_CCS811_RESET_GPIOS_PIN,
 			   GPIO_DIR_OUT);
-	gpio_pin_write(drv_data->gpio, CONFIG_CCS811_GPIO_RESET_PIN_NUM, 1);
+	gpio_pin_write(drv_data->gpio_reset,
+		       DT_INST_0_AMS_CCS811_RESET_GPIOS_PIN, 1);
 
 	k_sleep(K_MSEC(1));
 #endif
@@ -186,10 +198,12 @@ int ccs811_init(struct device *dev)
 	 * Wakeup pin should be pulled low before initiating any I2C transfer.
 	 * If it has been tied to GND by default, skip this part.
 	 */
-#ifdef CONFIG_CCS811_GPIO_WAKEUP
-	gpio_pin_configure(drv_data->gpio, CONFIG_CCS811_GPIO_WAKEUP_PIN_NUM,
+#ifdef DT_INST_0_AMS_CCS811_WAKE_GPIOS_CONTROLLER
+	gpio_pin_configure(drv_data->gpio_wakeup,
+			   DT_INST_0_AMS_CCS811_WAKE_GPIOS_PIN,
 			   GPIO_DIR_OUT);
-	gpio_pin_write(drv_data->gpio, CONFIG_CCS811_GPIO_WAKEUP_PIN_NUM, 0);
+	gpio_pin_write(drv_data->gpio_wakeup,
+		       DT_INST_0_AMS_CCS811_WAKE_GPIOS_PIN, 0);
 
 	k_sleep(K_MSEC(1));
 #endif
diff --git a/drivers/sensor/ccs811/ccs811.h b/drivers/sensor/ccs811/ccs811.h
index eb91022a9e0..a19d15579b1 100644
--- a/drivers/sensor/ccs811/ccs811.h
+++ b/drivers/sensor/ccs811/ccs811.h
@@ -44,8 +44,11 @@
 
 struct ccs811_data {
 	struct device *i2c;
-#ifdef CONFIG_CCS811_GPIO_WAKEUP
-	struct device *gpio;
+#ifdef DT_INST_0_AMS_CCS811_WAKE_GPIOS_CONTROLLER
+	struct device *gpio_wakeup;
+#endif
+#ifdef DT_INST_0_AMS_CCS811_RESET_GPIOS_CONTROLLER
+	struct device *gpio_reset;
 #endif
 	u16_t co2;
 	u16_t voc;
diff --git a/dts/bindings/sensor/ams,ccs811.yaml b/dts/bindings/sensor/ams,ccs811.yaml
index be62a4bd75e..1cb5a984ff2 100644
--- a/dts/bindings/sensor/ams,ccs811.yaml
+++ b/dts/bindings/sensor/ams,ccs811.yaml
@@ -10,3 +10,16 @@ description: |
 compatible: "ams,ccs811"
 
 include: i2c-device.yaml
+
+properties:
+    wake-gpios:
+      type: phandle-array
+      required: false
+
+    reset-gpios:
+      type: phandle-array
+      required: false
+
+    irq-gpios:
+      type: phandle-array
+      required: false