michaelh/zephyr
1
0
Fork 0
Code Releases Activity

Revert "misc: Remove generic PRINT macros from usb samples"

Browse source 
This reverts commit d01ad5b591.

Change-Id: I106a84fc69225ade496a9b70507030af767cb6cc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit is contained in:
Andrew Boie 2016-08-23 13:14:01 -07:00
commit 7f09bef9da
4 changed files with 25 additions and 16 deletions
Download patch file Download diff file Expand all files Collapse all files

1
samples/usb/cdc_acm/prj.conf
View file

@ -10,4 +10,3 @@ CONFIG_SYS_LOG_USB_LEVEL=0
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_UART_LINE_CTRL=y
CONFIG_SYS_LOG=y

24
samples/usb/cdc_acm/src/main.c
View file

@ -28,9 +28,13 @@
#include <uart.h>
#include <zephyr.h>
#define SYS_LOG_LEVEL SYS_LOG_LEVEL_INFO
#include <misc/sys_log.h>
#if defined(CONFIG_STDOUT_CONSOLE)
#include <stdio.h>
#define PRINT printf
#else
#include <misc/printk.h>
#define PRINT printk
#endif
static const char *banner1 = "Send characters to the UART device\r\n";
static const char *banner2 = "Characters read:\r\n";
@ -86,35 +90,35 @@ void main(void)
dev = device_get_binding(CONFIG_CDC_ACM_PORT_NAME);
if (!dev) {
SYS_LOG_INF("CDC ACM device not found");
PRINT("CDC ACM device not found\n");
return;
}
SYS_LOG_INF("Wait for DTR");
PRINT("Wait for DTR\n");
while (1) {
uart_line_ctrl_get(dev, LINE_CTRL_DTR, &dtr);
if (dtr)
break;
}
SYS_LOG_INF("DTR set, start test");
PRINT("DTR set, start test\n");
/* They are optional, we use them to test the interrupt endpoint */
ret = uart_line_ctrl_set(dev, LINE_CTRL_DCD, 1);
if (ret)
SYS_LOG_INF("Failed to set DCD, ret code %d", ret);
PRINT("Failed to set DCD, ret code %d\n", ret);
ret = uart_line_ctrl_set(dev, LINE_CTRL_DSR, 1);
if (ret)
SYS_LOG_INF("Failed to set DSR, ret code %d", ret);
PRINT("Failed to set DSR, ret code %d\n", ret);
/* Wait 1 sec for the host to do all settings */
sys_thread_busy_wait(1000000);
ret = uart_line_ctrl_get(dev, LINE_CTRL_BAUD_RATE, &baudrate);
if (ret)
SYS_LOG_INF("Failed to get baudrate, ret code %d", ret);
PRINT("Failed to get baudrate, ret code %d\n", ret);
else
SYS_LOG_INF("Baudrate detected: %d", baudrate);
PRINT("Baudrate detected: %d\n", baudrate);
uart_irq_callback_set(dev, interrupt_handler);
write_data(dev, banner1, strlen(banner1));

3
samples/usb/dfu/prj.conf
View file

@ -4,7 +4,8 @@ CONFIG_ARC_INIT=n
CONFIG_USB=y
CONFIG_USB_DW=y
CONFIG_USB_DEVICE_STACK=y
CONFIG_SYS_LOG=y
#Un comment to enable logging
#CONFIG_SYS_LOG=y
CONFIG_SYS_LOG_USB_DFU_LEVEL=0
CONFIG_SYS_LOG_USB_DW_LEVEL=0
CONFIG_SYS_LOG_USB_LEVEL=0

13
samples/usb/dfu/src/main.c
View file

@ -27,8 +27,13 @@
#include <zephyr.h>
#include "usb_dfu.h"
#define SYS_LOG_LEVEL SYS_LOG_LEVEL_INFO
#include <misc/sys_log.h>
#if defined(CONFIG_STDOUT_CONSOLE)
#include <stdio.h>
#define PRINT printf
#else
#include <misc/printk.h>
#define PRINT printk
#endif
#ifdef CONFIG_SOC_QUARK_SE
#define DFU_FLASH_DEVICE "QUARK_FLASH"
@ -44,11 +49,11 @@ void main(void)
{
struct device *dev = NULL;
SYS_LOG_INF("DFU Test Application");
PRINT("DFU Test Application\n");
dev = device_get_binding(DFU_FLASH_DEVICE);
if (!dev) {
SYS_LOG_ERR("Flash device not found");
printf("Flash device not found\n");
return;
}