diff --git a/drivers/ieee802154/Kconfig.nrf5 b/drivers/ieee802154/Kconfig.nrf5
index 89be6d66e96..aa12c248fdb 100644
--- a/drivers/ieee802154/Kconfig.nrf5
+++ b/drivers/ieee802154/Kconfig.nrf5
@@ -6,7 +6,7 @@
 menuconfig IEEE802154_NRF5
 	bool "nRF52 series IEEE 802.15.4 Driver"
 	depends on NETWORKING && HAS_HW_NRF_RADIO_IEEE802154
-	select HAS_NORDIC_DRIVERS
+	select NRF_802154_RADIO_DRIVER
 
 if IEEE802154_NRF5
 
@@ -31,42 +31,4 @@ config IEEE802154_NRF5_INIT_PRIO
 	  Set the initialization priority number. Do not mess with it unless
 	  you know what you are doing.
 
-choice IEEE802154_NRF5_CCA_MODE
-	prompt "nRF52 IEEE 802.15.4 CCA mode"
-	default IEEE802154_NRF5_CCA_MODE_ED
-	help
-	  CCA mode
-
-config IEEE802154_NRF5_CCA_MODE_ED
-	bool "Energy Above Threshold"
-
-config IEEE802154_NRF5_CCA_MODE_CARRIER
-	bool "Carrier Seen"
-
-config IEEE802154_NRF5_CCA_MODE_CARRIER_AND_ED
-	bool "Energy Above Threshold AND Carrier Seen"
-
-config IEEE802154_NRF5_CCA_MODE_CARRIER_OR_ED
-	bool "Energy Above Threshold OR Carrier Seen"
-
-endchoice
-
-config IEEE802154_NRF5_CCA_ED_THRESHOLD
-	int "nRF52 IEEE 802.15.4 CCA Energy Detection threshold"
-	default 45
-	help
-	  If energy detected in a given channel is above the value then the channel
-	  is deemed busy. The unit is defined as per 802.15.4-2006 spec.
-
-config IEEE802154_NRF5_CCA_CORR_THRESHOLD
-	int "nRF52 IEEE 802.15.4 CCA Correlator threshold"
-	default 45
-
-config IEEE802154_NRF5_CCA_CORR_LIMIT
-	int "nRF52 IEEE 802.15.4 CCA Correlator limit"
-	default 2
-	help
-	  Limit for occurrences above correlator threshold. When not equal to zero the
-	  correlator based signal detect is enabled.
-
 endif
diff --git a/modules/Kconfig.nordic b/modules/Kconfig.nordic
index c3e50c4c84c..6d250db73ef 100644
--- a/modules/Kconfig.nordic
+++ b/modules/Kconfig.nordic
@@ -3,6 +3,58 @@
 
 config HAS_NORDIC_DRIVERS
 	bool
+	default y if HAS_HW_NRF_RADIO_IEEE802154
+
+menu "Nordic drivers"
+	depends on HAS_NORDIC_DRIVERS
+
+menuconfig NRF_802154_RADIO_DRIVER
+	bool "Enable nRF IEEE 802.15.4 radio driver"
+	depends on HAS_HW_NRF_RADIO_IEEE802154
+
+if NRF_802154_RADIO_DRIVER
+
+choice NRF_802154_CCA_MODE
+	prompt "nRF IEEE 802.15.4 CCA mode"
+	default NRF_802154_CCA_MODE_ED
+	help
+	  CCA mode
+
+config NRF_802154_CCA_MODE_ED
+	bool "Energy Above Threshold"
+
+config NRF_802154_CCA_MODE_CARRIER
+	bool "Carrier Seen"
+
+config NRF_802154_CCA_MODE_CARRIER_AND_ED
+	bool "Energy Above Threshold AND Carrier Seen"
+
+config NRF_802154_CCA_MODE_CARRIER_OR_ED
+	bool "Energy Above Threshold OR Carrier Seen"
+
+endchoice
+
+config NRF_802154_CCA_ED_THRESHOLD
+	int "nRF IEEE 802.15.4 CCA Energy Detection threshold"
+	default 45
+	help
+	  If energy detected in a given channel is above the value then the
+	  channel is deemed busy. The unit is defined as per 802.15.4-2006 spec.
+
+config NRF_802154_CCA_CORR_THRESHOLD
+	int "nRF IEEE 802.15.4 CCA Correlator threshold"
+	default 45
+
+config NRF_802154_CCA_CORR_LIMIT
+	int "nRF IEEE 802.15.4 CCA Correlator limit"
+	default 2
+	help
+	  Limit for occurrences above correlator threshold. When not equal to
+	  zero the correlator based signal detect is enabled.
+
+endif # NRF_802154_RADIO_DRIVER
+
+endmenu
 
 config HAS_NRFX
 	bool
diff --git a/tests/net/all/prj.conf b/tests/net/all/prj.conf
index 6e620243620..122ac5aabef 100644
--- a/tests/net/all/prj.conf
+++ b/tests/net/all/prj.conf
@@ -428,13 +428,6 @@ CONFIG_NET_DEBUG_L2_IEEE802154_DISPLAY_PACKET_TX=y
 
 #CONFIG_SOC_SERIES_NRF52X=y
 #CONFIG_HAS_NORDIC_DRIVERS=y
-#CONFIG_IEEE802154_NRF5_CCA_CORR_LIMIT=1
-#CONFIG_IEEE802154_NRF5_CCA_CORR_THRESHOLD=1
-#CONFIG_IEEE802154_NRF5_CCA_ED_THRESHOLD=2
-#CONFIG_IEEE802154_NRF5_CCA_MODE_CARRIER_AND_ED=y
-#CONFIG_IEEE802154_NRF5_CCA_MODE_CARRIER_OR_ED=y
-#CONFIG_IEEE802154_NRF5_CCA_MODE_CARRIER=y
-#CONFIG_IEEE802154_NRF5_CCA_MODE_ED=y
 #CONFIG_IEEE802154_NRF5_DRV_NAME="NRF5"
 #CONFIG_IEEE802154_NRF5_INIT_PRIO=90
 #CONFIG_IEEE802154_NRF5=n
diff --git a/west.yml b/west.yml
index 945623fc35c..859480a6001 100644
--- a/west.yml
+++ b/west.yml
@@ -47,7 +47,7 @@ manifest:
       revision: a12d92816a53a521d79cefcf5c38b9dc8a4fed6e
       path: modules/hal/cypress
     - name: hal_nordic
-      revision: a1f24a4ee9774fe96390f2c6473b490c88b01ef6
+      revision: 72a785c1f3c25bc98cb5eb90914d19718b6ae4ee
       path: modules/hal/nordic
     - name: hal_openisa
       revision: 9bfbe35aad79fdf552dbdae47a894e26be7c022c