display: ssd1306: convert to _dt_spec
Convert the ssd1306 driver to `spi_dt_spec` and `i2c_dt_spec`. Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit is contained in:
Jordan Yates
Christopher Friedt
parent
c27caac5e7
commit
7b42f8960a
1 changed files with 66 additions and 75 deletions
|
|
@ -47,40 +47,61 @@ LOG_MODULE_REGISTER(ssd1306, CONFIG_DISPLAY_LOG_LEVEL);
|
|||
#define SSD1306_ADDRESSING_MODE (SSD1306_SET_MEM_ADDRESSING_HORIZONTAL)
|
||||
#endif
|
||||
|
||||
struct ssd1306_data {
|
||||
const struct device *reset;
|
||||
const struct device *bus;
|
||||
#if DT_INST_ON_BUS(0, spi)
|
||||
struct spi_cs_control cs_ctrl;
|
||||
struct spi_config spi_config;
|
||||
const struct device *data_cmd;
|
||||
struct ssd1306_config {
|
||||
#if DT_INST_ON_BUS(0, i2c)
|
||||
struct i2c_dt_spec bus;
|
||||
#elif DT_INST_ON_BUS(0, spi)
|
||||
struct spi_dt_spec bus;
|
||||
struct gpio_dt_spec data_cmd;
|
||||
#endif
|
||||
struct gpio_dt_spec reset;
|
||||
};
|
||||
|
||||
struct ssd1306_data {
|
||||
uint8_t contrast;
|
||||
uint8_t scan_mode;
|
||||
};
|
||||
|
||||
#if DT_INST_ON_BUS(0, i2c)
|
||||
|
||||
static inline bool ssd1306_bus_ready(const struct device *dev)
|
||||
{
|
||||
const struct ssd1306_config *config = dev->config;
|
||||
|
||||
return device_is_ready(config->bus.bus);
|
||||
}
|
||||
|
||||
static inline int ssd1306_write_bus(const struct device *dev,
|
||||
uint8_t *buf, size_t len, bool command)
|
||||
{
|
||||
struct ssd1306_data *driver = dev->data;
|
||||
const struct ssd1306_config *config = dev->config;
|
||||
|
||||
return i2c_burst_write(driver->bus, DT_INST_REG_ADDR(0),
|
||||
command ? SSD1306_CONTROL_ALL_BYTES_CMD :
|
||||
SSD1306_CONTROL_ALL_BYTES_DATA,
|
||||
buf, len);
|
||||
return i2c_burst_write_dt(&config->bus,
|
||||
command ? SSD1306_CONTROL_ALL_BYTES_CMD :
|
||||
SSD1306_CONTROL_ALL_BYTES_DATA,
|
||||
buf, len);
|
||||
}
|
||||
|
||||
#elif DT_INST_ON_BUS(0, spi)
|
||||
|
||||
static inline bool ssd1306_bus_ready(const struct device *dev)
|
||||
{
|
||||
const struct ssd1306_config *config = dev->config;
|
||||
|
||||
if (gpio_pin_configure_dt(&config->data_cmd, GPIO_OUTPUT_INACTIVE) < 0) {
|
||||
return false;
|
||||
}
|
||||
|
||||
return spi_is_ready(&config->bus);
|
||||
}
|
||||
|
||||
static inline int ssd1306_write_bus(const struct device *dev,
|
||||
uint8_t *buf, size_t len, bool command)
|
||||
{
|
||||
struct ssd1306_data *driver = dev->data;
|
||||
const struct ssd1306_config *config = dev->config;
|
||||
int errno;
|
||||
|
||||
gpio_pin_set(driver->data_cmd, DT_INST_GPIO_PIN(0, data_cmd_gpios),
|
||||
command ? 0 : 1);
|
||||
gpio_pin_set_dt(&config->data_cmd, command ? 0 : 1);
|
||||
struct spi_buf tx_buf = {
|
||||
.buf = buf,
|
||||
.len = len
|
||||
|
|
@ -91,7 +112,7 @@ static inline int ssd1306_write_bus(const struct device *dev,
|
|||
.count = 1
|
||||
};
|
||||
|
||||
errno = spi_write(driver->bus, &driver->spi_config, &tx_bufs);
|
||||
errno = spi_write_dt(&config->bus, &tx_bufs);
|
||||
|
||||
return errno;
|
||||
}
|
||||
|
|
@ -322,6 +343,8 @@ static int ssd1306_set_pixel_format(const struct device *dev,
|
|||
|
||||
static int ssd1306_init_device(const struct device *dev)
|
||||
{
|
||||
const struct ssd1306_config *config = dev->config;
|
||||
|
||||
uint8_t cmd_buf[] = {
|
||||
SSD1306_SET_ENTIRE_DISPLAY_OFF,
|
||||
#ifdef CONFIG_SSD1306_REVERSE_MODE
|
||||
|
|
@ -331,16 +354,13 @@ static int ssd1306_init_device(const struct device *dev)
|
|||
#endif
|
||||
};
|
||||
|
||||
#if DT_INST_NODE_HAS_PROP(0, reset_gpios)
|
||||
struct ssd1306_data *driver = dev->data;
|
||||
|
||||
k_sleep(K_MSEC(SSD1306_RESET_DELAY));
|
||||
gpio_pin_set(driver->reset,
|
||||
DT_INST_GPIO_PIN(0, reset_gpios), 1);
|
||||
k_sleep(K_MSEC(SSD1306_RESET_DELAY));
|
||||
gpio_pin_set(driver->reset,
|
||||
DT_INST_GPIO_PIN(0, reset_gpios), 0);
|
||||
#endif
|
||||
/* Reset if pin connected */
|
||||
if (config->reset.port) {
|
||||
k_sleep(K_MSEC(SSD1306_RESET_DELAY));
|
||||
gpio_pin_set_dt(&config->reset, 1);
|
||||
k_sleep(K_MSEC(SSD1306_RESET_DELAY));
|
||||
gpio_pin_set_dt(&config->reset, 0);
|
||||
}
|
||||
|
||||
/* Turn display off */
|
||||
if (ssd1306_suspend(dev)) {
|
||||
|
|
@ -378,60 +398,19 @@ static int ssd1306_init_device(const struct device *dev)
|
|||
|
||||
static int ssd1306_init(const struct device *dev)
|
||||
{
|
||||
struct ssd1306_data *driver = dev->data;
|
||||
const struct ssd1306_config *config = dev->config;
|
||||
|
||||
LOG_DBG("");
|
||||
|
||||
driver->bus = device_get_binding(DT_INST_BUS_LABEL(0));
|
||||
if (driver->bus == NULL) {
|
||||
LOG_ERR("Failed to get pointer to %s device!",
|
||||
DT_INST_BUS_LABEL(0));
|
||||
if (!ssd1306_bus_ready(dev)) {
|
||||
LOG_ERR("Bus device %s not ready!", config->bus.bus->name);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
#if DT_INST_NODE_HAS_PROP(0, reset_gpios)
|
||||
driver->reset = device_get_binding(
|
||||
DT_INST_GPIO_LABEL(0, reset_gpios));
|
||||
if (driver->reset == NULL) {
|
||||
LOG_ERR("Failed to get pointer to %s device!",
|
||||
DT_INST_GPIO_LABEL(0, reset_gpios));
|
||||
return -EINVAL;
|
||||
if (config->reset.port) {
|
||||
gpio_pin_configure_dt(&config->reset, GPIO_OUTPUT_INACTIVE);
|
||||
}
|
||||
|
||||
gpio_pin_configure(driver->reset,
|
||||
DT_INST_GPIO_PIN(0, reset_gpios),
|
||||
GPIO_OUTPUT_INACTIVE |
|
||||
DT_INST_GPIO_FLAGS(0, reset_gpios));
|
||||
#endif
|
||||
|
||||
#if DT_INST_ON_BUS(0, spi)
|
||||
driver->spi_config.frequency = DT_INST_PROP(0, spi_max_frequency);
|
||||
driver->spi_config.operation = SPI_OP_MODE_MASTER | SPI_TRANSFER_MSB |
|
||||
SPI_WORD_SET(8) | SPI_LINES_SINGLE;
|
||||
driver->spi_config.slave = DT_INST_REG_ADDR(0);
|
||||
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
|
||||
driver->cs_ctrl.gpio_dev = device_get_binding(
|
||||
DT_INST_SPI_DEV_CS_GPIOS_LABEL(0));
|
||||
driver->cs_ctrl.gpio_pin = DT_INST_SPI_DEV_CS_GPIOS_PIN(0);
|
||||
driver->cs_ctrl.gpio_dt_flags = DT_INST_SPI_DEV_CS_GPIOS_FLAGS(0);
|
||||
driver->cs_ctrl.delay = 0U;
|
||||
driver->spi_config.cs = &driver->cs_ctrl;
|
||||
#endif /* DT_INST_SPI_DEV_HAS_CS_GPIOS(0) */
|
||||
|
||||
driver->data_cmd = device_get_binding(
|
||||
DT_INST_GPIO_LABEL(0, data_cmd_gpios));
|
||||
if (driver->data_cmd == NULL) {
|
||||
LOG_ERR("Failed to get pointer to %s device!",
|
||||
DT_INST_GPIO_LABEL(0, data_cmd_gpios));
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
gpio_pin_configure(driver->data_cmd,
|
||||
DT_INST_GPIO_PIN(0, data_cmd_gpios),
|
||||
GPIO_OUTPUT_INACTIVE |
|
||||
DT_INST_GPIO_FLAGS(0, data_cmd_gpios));
|
||||
#endif /* DT_INST_ON_BUS(0, spi) */
|
||||
|
||||
if (ssd1306_init_device(dev)) {
|
||||
LOG_ERR("Failed to initialize device!");
|
||||
return -EIO;
|
||||
|
|
@ -440,6 +419,18 @@ static int ssd1306_init(const struct device *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static const struct ssd1306_config ssd1306_config = {
|
||||
#if DT_INST_ON_BUS(0, i2c)
|
||||
.bus = I2C_DT_SPEC_INST_GET(0),
|
||||
#elif DT_INST_ON_BUS(0, spi)
|
||||
.bus = SPI_DT_SPEC_INST_GET(
|
||||
0, SPI_OP_MODE_MASTER | SPI_TRANSFER_MSB |
|
||||
SPI_WORD_SET(8) | SPI_LINES_SINGLE, 0),
|
||||
.data_cmd = GPIO_DT_SPEC_INST_GET(0, data_cmd_gpios),
|
||||
#endif
|
||||
.reset = GPIO_DT_SPEC_INST_GET_OR(0, reset_gpios, { 0 })
|
||||
};
|
||||
|
||||
static struct ssd1306_data ssd1306_driver;
|
||||
|
||||
static struct display_driver_api ssd1306_driver_api = {
|
||||
|
|
@ -456,6 +447,6 @@ static struct display_driver_api ssd1306_driver_api = {
|
|||
};
|
||||
|
||||
DEVICE_DT_INST_DEFINE(0, ssd1306_init, NULL,
|
||||
&ssd1306_driver, NULL,
|
||||
POST_KERNEL, CONFIG_APPLICATION_INIT_PRIORITY,
|
||||
&ssd1306_driver_api);
|
||||
&ssd1306_driver, &ssd1306_config,
|
||||
POST_KERNEL, CONFIG_APPLICATION_INIT_PRIORITY,
|
||||
&ssd1306_driver_api);
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue