michaelh/zephyr
1
0
Fork 0
Code Releases Activity

Bluetooth: Mesh: Add macro control whether adv main to relay

Browse source 
Enable advertiser main to support relay messages, this maximizes
theutilization efficiency of advertising sets, which is helpful for the
sending of dense relays, but for Friend and LPN, it delays the sending
of local messages a little, this may cause the time slot deviation between
friend and lpn, and the power consumption of lpn will increase.

Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This commit is contained in:
Lingao Meng 2022-11-10 12:23:07 +08:00 • committed by Carles Cufí
commit 7668bd3b7c
3 changed files with 29 additions and 4 deletions
Download patch file Download diff file Expand all files Collapse all files

19
subsys/bluetooth/mesh/Kconfig
View file

@ -389,6 +389,25 @@ config BT_MESH_RELAY_ADV_SETS
Maximum of simultaneous relay message support. Requires controller support Maximum of simultaneous relay message support. Requires controller support
multiple advertising sets. multiple advertising sets.
config BT_MESH_ADV_EXT_RELAY_USING_MAIN_ADV_SET
bool "Use the main advertising set to relay messages"
depends on BT_MESH_RELAY_ADV_SETS > 0
help
When this option is enabled, there is a message that needs to be
relayed, all relay advertising sets defined by
CONFIG_BT_MESH_RELAY_ADV_SETS are busy with relaying messages
and the main advertising set is not busy with sending local
messages, the stack will use the main advertising set to relay
the message. This maximizes the utilization efficiency of
advertising sets, which is helpful for the sending of dense
relays. With CONFIG_BT_MESH_RELAY_RETRANSMIT_COUNT value
greater than zero, this can noticeably delay transmission of
local messages. When Friend feature is enabled and the node is
in a friendship, this option can delay transmission of local
messages thus requiring bigger CONFIG_BT_MESH_FRIEND_RECV_WIN
value. This in turn will result in increase of the power
consumption of the Low Power node.
config BT_MESH_ADV_EXT_GATT_SEPARATE config BT_MESH_ADV_EXT_GATT_SEPARATE
bool "Use a separate extended advertising set for GATT Server Advertising" bool "Use a separate extended advertising set for GATT Server Advertising"
depends on BT_MESH_GATT_SERVER depends on BT_MESH_GATT_SERVER

3
subsys/bluetooth/mesh/adv.c
View file

@ -142,11 +142,12 @@ struct net_buf *bt_mesh_adv_buf_get(k_timeout_t timeout)
K_POLL_MODE_NOTIFY_ONLY, K_POLL_MODE_NOTIFY_ONLY,
&bt_mesh_adv_queue, &bt_mesh_adv_queue,
0), 0),
#if defined(CONFIG_BT_MESH_ADV_EXT_RELAY_USING_MAIN_ADV_SET)
K_POLL_EVENT_STATIC_INITIALIZER(K_POLL_TYPE_FIFO_DATA_AVAILABLE, K_POLL_EVENT_STATIC_INITIALIZER(K_POLL_TYPE_FIFO_DATA_AVAILABLE,
K_POLL_MODE_NOTIFY_ONLY, K_POLL_MODE_NOTIFY_ONLY,
&bt_mesh_relay_queue, &bt_mesh_relay_queue,
0), 0),
#endif /* CONFIG_BT_MESH_ADV_EXT_RELAY_USING_MAIN_ADV_SET */
}; };
err = k_poll(events, ARRAY_SIZE(events), timeout); err = k_poll(events, ARRAY_SIZE(events), timeout);

11
subsys/bluetooth/mesh/adv_ext.c
View file

@ -65,11 +65,14 @@ static void send_pending_adv(struct k_work *work);
static bool schedule_send(struct bt_mesh_ext_adv *adv); static bool schedule_send(struct bt_mesh_ext_adv *adv);
static STRUCT_SECTION_ITERABLE(bt_mesh_ext_adv, adv_main) = { static STRUCT_SECTION_ITERABLE(bt_mesh_ext_adv, adv_main) = {
.tag = (BT_MESH_LOCAL_ADV | .tag = (
#if !defined(CONFIG_BT_MESH_ADV_EXT_GATT_SEPARATE) #if !defined(CONFIG_BT_MESH_ADV_EXT_GATT_SEPARATE)
BT_MESH_PROXY_ADV | BT_MESH_PROXY_ADV |
#endif /* !CONFIG_BT_MESH_ADV_EXT_GATT_SEPARATE */ #endif /* !CONFIG_BT_MESH_ADV_EXT_GATT_SEPARATE */
BT_MESH_RELAY_ADV), #if defined(CONFIG_BT_MESH_ADV_EXT_RELAY_USING_MAIN_ADV_SET)
BT_MESH_RELAY_ADV |
#endif /* CONFIG_BT_MESH_ADV_EXT_RELAY_USING_MAIN_ADV_SET */
BT_MESH_LOCAL_ADV),
.work = Z_WORK_DELAYABLE_INITIALIZER(send_pending_adv), .work = Z_WORK_DELAYABLE_INITIALIZER(send_pending_adv),
}; };
@ -324,7 +327,9 @@ void bt_mesh_adv_buf_relay_ready(void)
} }
/* Attempt to use the main adv set for the sending of relay messages. */ /* Attempt to use the main adv set for the sending of relay messages. */
(void)schedule_send(&adv_main); if (IS_ENABLED(CONFIG_BT_MESH_ADV_EXT_RELAY_USING_MAIN_ADV_SET)) {
(void)schedule_send(&adv_main);
}
} }
void bt_mesh_adv_init(void) void bt_mesh_adv_init(void)