michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: gpio_mcux: clean up interrupt code

Browse source 
Remove redundant interrupt code from gpio_mcux_configure, move the rest
to gpio_mcux_pin_interrupt_configure.

Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit is contained in:
Piotr Mienkowski 2019-10-16 03:20:41 +02:00 • committed by Carles Cufí
commit 73fcc07281
1 changed files with 40 additions and 57 deletions
Download patch file Download diff file Expand all files Collapse all files

97
drivers/gpio/gpio_mcux.c
View file

@ -29,46 +29,12 @@ struct gpio_mcux_data {
u32_t pin_callback_enables;
};
static u32_t get_port_pcr_irqc_value_from_flags(struct device *dev,
u32_t pin, enum gpio_int_mode mode,
enum gpio_int_trig trig)
{
port_interrupt_t port_interrupt = 0;
if (mode == GPIO_INT_MODE_DISABLED) {
port_interrupt = kPORT_InterruptOrDMADisabled;
} else {
if (mode == GPIO_INT_MODE_LEVEL) {
if (trig == GPIO_INT_TRIG_LOW) {
port_interrupt = kPORT_InterruptLogicZero;
} else {
port_interrupt = kPORT_InterruptLogicOne;
}
} else {
switch (trig) {
case GPIO_INT_TRIG_LOW:
port_interrupt = kPORT_InterruptFallingEdge;
break;
case GPIO_INT_TRIG_HIGH:
port_interrupt = kPORT_InterruptRisingEdge;
break;
case GPIO_INT_TRIG_BOTH:
port_interrupt = kPORT_InterruptEitherEdge;
break;
}
}
}
return PORT_PCR_IRQC(port_interrupt);
}
static int gpio_mcux_configure(struct device *dev,
int access_op, u32_t pin, int flags)
{
const struct gpio_mcux_config *config = dev->config->config_info;
GPIO_Type *gpio_base = config->gpio_base;
PORT_Type *port_base = config->port_base;
struct gpio_mcux_data *data = dev->driver_data;
u32_t mask = 0U;
u32_t pcr = 0U;
u8_t i;
@ -78,11 +44,6 @@ static int gpio_mcux_configure(struct device *dev,
return -EINVAL;
}
/* Check for an invalid pin configuration */
if ((flags & GPIO_INT_ENABLE) && ((flags & GPIO_INPUT) == 0)) {
return -EINVAL;
}
if (((flags & GPIO_INPUT) != 0) && ((flags & GPIO_OUTPUT) != 0)) {
return -ENOTSUP;
}
@ -91,12 +52,6 @@ static int gpio_mcux_configure(struct device *dev,
return -ENOTSUP;
}
/* Check if GPIO port supports interrupts */
if ((flags & GPIO_INT_ENABLE) &&
((config->flags & GPIO_INT_ENABLE) == 0U)) {
return -ENOTSUP;
}
/* The flags contain options that require touching registers in the
* GPIO module and the corresponding PORT module.
*
@ -144,28 +99,16 @@ static int gpio_mcux_configure(struct device *dev,
pcr |= PORT_PCR_PE_MASK;
}
/* Still in the PORT module. Figure out the interrupt configuration,
* but don't write it to the PCR register yet.
*/
mask |= PORT_PCR_IRQC_MASK;
/* Now we can write the PORT PCR register(s). If accessing by pin, we
* only need to write one PCR register. Otherwise, write all the PCR
* registers in the PORT module (one for each pin).
*/
if (access_op == GPIO_ACCESS_BY_PIN) {
port_base->PCR[pin] = (port_base->PCR[pin] & ~mask) | pcr;
WRITE_BIT(data->pin_callback_enables, pin,
flags & GPIO_INT_ENABLE);
} else { /* GPIO_ACCESS_BY_PORT */
for (i = 0U; i < ARRAY_SIZE(port_base->PCR); i++) {
port_base->PCR[i] = (port_base->PCR[pin] & ~mask) | pcr;
}
if (flags & GPIO_INT_ENABLE) {
data->pin_callback_enables = 0xFFFFFFFF;
} else {
data->pin_callback_enables = 0x0;
}
}
return 0;
@ -267,11 +210,45 @@ static int gpio_mcux_port_toggle_bits(struct device *dev, u32_t mask)
return 0;
}
static u32_t get_port_pcr_irqc_value_from_flags(struct device *dev,
u32_t pin, enum gpio_int_mode mode,
enum gpio_int_trig trig)
{
port_interrupt_t port_interrupt = 0;
if (mode == GPIO_INT_MODE_DISABLED) {
port_interrupt = kPORT_InterruptOrDMADisabled;
} else {
if (mode == GPIO_INT_MODE_LEVEL) {
if (trig == GPIO_INT_TRIG_LOW) {
port_interrupt = kPORT_InterruptLogicZero;
} else {
port_interrupt = kPORT_InterruptLogicOne;
}
} else {
switch (trig) {
case GPIO_INT_TRIG_LOW:
port_interrupt = kPORT_InterruptFallingEdge;
break;
case GPIO_INT_TRIG_HIGH:
port_interrupt = kPORT_InterruptRisingEdge;
break;
case GPIO_INT_TRIG_BOTH:
port_interrupt = kPORT_InterruptEitherEdge;
break;
}
}
}
return PORT_PCR_IRQC(port_interrupt);
}
static int gpio_mcux_pin_interrupt_configure(struct device *dev,
unsigned int pin, enum gpio_int_mode mode,
enum gpio_int_trig trig)
{
const struct gpio_mcux_config *config = dev->config->config_info;
GPIO_Type *gpio_base = config->gpio_base;
PORT_Type *port_base = config->port_base;
struct gpio_mcux_data *data = dev->driver_data;
@ -280,6 +257,12 @@ static int gpio_mcux_pin_interrupt_configure(struct device *dev,
return -EINVAL;
}
/* Check for an invalid pin configuration */
if ((mode != GPIO_INT_MODE_DISABLED) &&
((gpio_base->PDDR & BIT(pin)) != 0)) {
return -EINVAL;
}
/* Check if GPIO port supports interrupts */
if ((mode != GPIO_INT_MODE_DISABLED) &&
((config->flags & GPIO_INT_ENABLE) == 0U)) {