michaelh/zephyr
1
0
Fork 0
Code Releases Activity

driver: usdhc: modify LOG message

Browse source 
LOG API will auto add \r\n at output end,
remove the \r\n at the end of debug messge.

Fix misspelled.

Signed-off-by: Frank Li <lgl88911@163.com>
This commit is contained in:
Frank Li 2021-04-01 21:43:17 +08:00 • committed by Maureen Helm
commit 6f97f52f34
1 changed files with 18 additions and 18 deletions
Download patch file Download diff file Expand all files Collapse all files

36
drivers/disk/usdhc.c
View file

@ -1141,7 +1141,7 @@ static int usdhc_wait_cmd_done(struct usdhc_priv *priv,
if (!error) {
error = usdhc_cmd_rsp(priv);
} else {
LOG_ERR("CMD%d Polling ERROR\r\n",
LOG_ERR("CMD%d Polling ERROR",
priv->op_context.cmd.index);
}
@ -2366,7 +2366,7 @@ static int usdhc_sd_init(struct usdhc_priv *priv)
priv->card_info.card_flags |= USDHC_SDHC_FLAG;
} else {
/* SDSC card */
LOG_ERR("USDHC SDSC not implemented yet!\r\n");
LOG_ERR("USDHC SDSC not implemented yet!");
return -ENOTSUP;
}
@ -2379,7 +2379,7 @@ APP_SEND_OP_COND_AGAIN:
SDHC_APP_SEND_OP_COND, app_cmd_41_arg,
SDHC_RSP_TYPE_R1, SDHC_RSP_TYPE_R3, 1);
if (ret) {
LOG_ERR("APP Condition CMD failed:%d\r\n", ret);
LOG_ERR("APP Condition CMD failed:%d", ret);
return ret;
}
if (cmd->response[0U] & SD_OCR_PWR_BUSY_FLAG) {
@ -2406,7 +2406,7 @@ APP_SEND_OP_COND_AGAIN:
ret = usdhc_vol_switch(priv);
}
if (ret) {
LOG_ERR("Voltage switch failed: %d\r\n", ret);
LOG_ERR("Voltage switch failed: %d", ret);
return ret;
}
priv->card_info.voltage = SD_VOL_1_8_V;
@ -2422,7 +2422,7 @@ APP_SEND_OP_COND_AGAIN:
sdhc_decode_cid(&priv->card_info.cid,
priv->card_info.raw_cid);
} else {
LOG_ERR("All send CID CMD failed: %d\r\n", ret);
LOG_ERR("All send CID CMD failed: %d", ret);
return ret;
}
@ -2433,7 +2433,7 @@ APP_SEND_OP_COND_AGAIN:
if (!ret) {
priv->card_info.relative_addr = (cmd->response[0U] >> 16U);
} else {
LOG_ERR("Send relative address CMD failed: %d\r\n", ret);
LOG_ERR("Send relative address CMD failed: %d", ret);
return ret;
}
@ -2448,7 +2448,7 @@ APP_SEND_OP_COND_AGAIN:
&priv->card_info.sd_block_count,
&priv->card_info.sd_block_size);
} else {
LOG_ERR("Send CSD CMD failed: %d\r\n", ret);
LOG_ERR("Send CSD CMD failed: %d", ret);
return ret;
}
@ -2458,7 +2458,7 @@ APP_SEND_OP_COND_AGAIN:
ret = usdhc_xfer(priv);
if (ret || (cmd->response[0U] & SDHC_R1ERR_All_FLAG)) {
LOG_ERR("Select card CMD failed: %d\r\n", ret);
LOG_ERR("Select card CMD failed: %d", ret);
return -EIO;
}
@ -2471,7 +2471,7 @@ APP_SEND_OP_COND_AGAIN:
SDHC_RSP_TYPE_R1, SDHC_RSP_TYPE_R1, 0);
if (ret) {
LOG_ERR("Send SCR following APP CMD failed: %d\r\n", ret);
LOG_ERR("Send SCR following APP CMD failed: %d", ret);
return ret;
}
@ -2528,7 +2528,7 @@ APP_SEND_OP_COND_AGAIN:
SDHC_RSP_TYPE_R1, SDHC_RSP_TYPE_R1, 1);
if (ret) {
LOG_ERR("Set bus width failed: %d\r\n", ret);
LOG_ERR("Set bus width failed: %d", ret);
return ret;
}
usdhc_set_bus_width(base, USDHC_DATA_BUS_WIDTH_4BIT);
@ -2539,7 +2539,7 @@ APP_SEND_OP_COND_AGAIN:
ret = usdhc_select_fun(priv, SD_GRP_DRIVER_STRENGTH_MODE,
priv->card_info.driver_strength);
if (ret) {
LOG_ERR("Set SD driver strehgth failed: %d\r\n", ret);
LOG_ERR("Set SD driver strength failed: %d", ret);
return ret;
}
@ -2547,7 +2547,7 @@ APP_SEND_OP_COND_AGAIN:
ret = usdhc_select_fun(priv, SD_GRP_CURRENT_LIMIT_MODE,
priv->card_info.max_current);
if (ret) {
LOG_ERR("Set SD current limit failed: %d\r\n", ret);
LOG_ERR("Set SD current limit failed: %d", ret);
return ret;
}
}
@ -2558,7 +2558,7 @@ APP_SEND_OP_COND_AGAIN:
ret = usdhc_xfer(priv);
if (ret || cmd->response[0U] & SDHC_R1ERR_All_FLAG) {
LOG_ERR("Set block size failed: %d\r\n", ret);
LOG_ERR("Set block size failed: %d", ret);
return -EIO;
}
@ -2566,7 +2566,7 @@ APP_SEND_OP_COND_AGAIN:
/* select bus timing */
ret = usdhc_select_bus_timing(priv);
if (ret) {
LOG_ERR("Select bus timing failed: %d\r\n", ret);
LOG_ERR("Select bus timing failed: %d", ret);
return ret;
}
}
@ -2582,7 +2582,7 @@ APP_SEND_OP_COND_AGAIN:
}
if (ret) {
LOG_ERR("USDHC bus device initalization failed!\r\n");
LOG_ERR("USDHC bus device initalization failed!");
}
return ret;
@ -2627,7 +2627,7 @@ static int usdhc_board_access_init(struct usdhc_priv *priv)
}
if (!priv->detect_gpio) {
LOG_INF("USDHC detection other than GPIO not implemented!\r\n");
LOG_INF("USDHC detection other than GPIO not implemented!");
return 0;
}
@ -2647,13 +2647,13 @@ static int usdhc_board_access_init(struct usdhc_priv *priv)
if (gpio_level == 0) {
priv->inserted = false;
LOG_ERR("NO SD inserted!\r\n");
LOG_ERR("NO SD inserted!");
return -ENODEV;
}
priv->inserted = true;
LOG_INF("SD inserted!\r\n");
LOG_INF("SD inserted!");
return 0;
}