michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: can: mcp2515: abort transfers before entering configuration mode

Browse source 
Abort any pending transmissions before entering configuration mode and
notify the senders.

Poll for mode change completion instead of assuming mode changes take
immediate effect. This is needed for successfully entering configuration
mode with recently aborted transmissions.

Fixes: #50545

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit is contained in:
Henrik Brix Andersen 2022-09-21 15:49:58 +02:00 • committed by Fabio Baltieri
commit 6d08944ac1
2 changed files with 54 additions and 20 deletions
Download patch file Download diff file Expand all files Collapse all files

72
drivers/can/can_mcp2515.c
View file

@ -35,6 +35,12 @@ LOG_MODULE_REGISTER(can_mcp2515, CONFIG_CAN_LOG_LEVEL);
#error You must either set a sampling-point or timings (phase-seg* and prop-seg)
#endif
/* Timeout for changing mode */
#define MCP2515_MODE_CHANGE_TIMEOUT_USEC 1000
#define MCP2515_MODE_CHANGE_RETRIES 100
#define MCP2515_MODE_CHANGE_DELAY \
K_USEC(MCP2515_MODE_CHANGE_TIMEOUT_USEC / MCP2515_MODE_CHANGE_RETRIES)
static int mcp2515_cmd_soft_reset(const struct device *dev)
{
const struct mcp2515_config *dev_cfg = dev->config;
@ -271,6 +277,7 @@ static void mcp2515_convert_mcp2515frame_to_canframe(const uint8_t *source,
const int mcp2515_set_mode_int(const struct device *dev, uint8_t mcp2515_mode)
{
int retries = MCP2515_MODE_CHANGE_RETRIES;
uint8_t canstat;
mcp2515_cmd_bit_modify(dev, MCP2515_ADDR_CANCTRL,
@ -278,15 +285,36 @@ const int mcp2515_set_mode_int(const struct device *dev, uint8_t mcp2515_mode)
mcp2515_mode << MCP2515_CANCTRL_MODE_POS);
mcp2515_cmd_read_reg(dev, MCP2515_ADDR_CANSTAT, &canstat, 1);
if (((canstat & MCP2515_CANSTAT_MODE_MASK) >> MCP2515_CANSTAT_MODE_POS)
!= mcp2515_mode) {
LOG_ERR("Failed to set MCP2515 operation mode");
return -EIO;
while (((canstat & MCP2515_CANSTAT_MODE_MASK) >> MCP2515_CANSTAT_MODE_POS)
!= mcp2515_mode) {
if (--retries < 0) {
LOG_ERR("Timeout trying to set MCP2515 operation mode");
return -EIO;
}
k_sleep(MCP2515_MODE_CHANGE_DELAY);
mcp2515_cmd_read_reg(dev, MCP2515_ADDR_CANSTAT, &canstat, 1);
}
return 0;
}
static void mcp2515_tx_done(const struct device *dev, uint8_t tx_idx, int status)
{
struct mcp2515_data *dev_data = dev->data;
can_tx_callback_t callback = dev_data->tx_cb[tx_idx].cb;
if (callback != NULL) {
callback(dev, status, dev_data->tx_cb[tx_idx].cb_arg);
dev_data->tx_cb[tx_idx].cb = NULL;
k_mutex_lock(&dev_data->mutex, K_FOREVER);
dev_data->tx_busy_map &= ~BIT(tx_idx);
k_mutex_unlock(&dev_data->mutex);
k_sem_give(&dev_data->tx_sem);
}
}
static int mcp2515_get_core_clock(const struct device *dev, uint32_t *rate)
{
const struct mcp2515_config *dev_cfg = dev->config;
@ -457,6 +485,7 @@ static int mcp2515_stop(const struct device *dev)
const struct mcp2515_config *dev_cfg = dev->config;
struct mcp2515_data *dev_data = dev->data;
int ret;
int i;
if (!dev_data->started) {
return -EALREADY;
@ -464,6 +493,18 @@ static int mcp2515_stop(const struct device *dev)
k_mutex_lock(&dev_data->mutex, K_FOREVER);
/* Abort any pending transmissions before entering configuration mode */
mcp2515_cmd_bit_modify(dev, MCP2515_ADDR_TXB0CTRL,
MCP2515_TXBNCTRL_TXREQ_MASK, 0);
#if MCP2515_TX_CNT == 2
mcp2515_cmd_bit_modify(dev, MCP2515_ADDR_TXB1CTRL,
MCP2515_TXBNCTRL_TXREQ_MASK, 0);
#endif /* MCP2515_TX_CNT == 2 */
#if MCP2515_TX_CNT == 3
mcp2515_cmd_bit_modify(dev, MCP2515_ADDR_TXB2CTRL,
MCP2515_TXBNCTRL_TXREQ_MASK, 0);
#endif /* MCP2515_TX_CNT == 3 */
ret = mcp2515_set_mode_int(dev, MCP2515_MODE_CONFIGURATION);
if (ret < 0) {
LOG_ERR("Failed to enter configuration mode [%d]", ret);
@ -475,6 +516,10 @@ static int mcp2515_stop(const struct device *dev)
k_mutex_unlock(&dev_data->mutex);
for (i = 0; i < MCP2515_TX_CNT; i++) {
mcp2515_tx_done(dev, i, -ENETDOWN);
}
if (dev_cfg->phy != NULL) {
ret = can_transceiver_disable(dev_cfg->phy);
if (ret != 0) {
@ -678,19 +723,6 @@ static void mcp2515_rx(const struct device *dev, uint8_t rx_idx)
mcp2515_rx_filter(dev, &frame);
}
static void mcp2515_tx_done(const struct device *dev, uint8_t tx_idx)
{
struct mcp2515_data *dev_data = dev->data;
dev_data->tx_cb[tx_idx].cb(dev, 0, dev_data->tx_cb[tx_idx].cb_arg);
dev_data->tx_cb[tx_idx].cb = NULL;
k_mutex_lock(&dev_data->mutex, K_FOREVER);
dev_data->tx_busy_map &= ~BIT(tx_idx);
k_mutex_unlock(&dev_data->mutex);
k_sem_give(&dev_data->tx_sem);
}
static int mcp2515_get_state(const struct device *dev, enum can_state *state,
struct can_bus_err_cnt *err_cnt)
{
@ -805,15 +837,15 @@ static void mcp2515_handle_interrupts(const struct device *dev)
}
if (canintf & MCP2515_CANINTF_TX0IF) {
mcp2515_tx_done(dev, 0);
mcp2515_tx_done(dev, 0, 0);
}
if (canintf & MCP2515_CANINTF_TX1IF) {
mcp2515_tx_done(dev, 1);
mcp2515_tx_done(dev, 1, 0);
}
if (canintf & MCP2515_CANINTF_TX2IF) {
mcp2515_tx_done(dev, 2);
mcp2515_tx_done(dev, 2, 0);
}
if (canintf & MCP2515_CANINTF_ERRIF) {

2
drivers/can/can_mcp2515.h
View file

@ -156,5 +156,7 @@ struct mcp2515_config {
#define MCP2515_CANSTAT_MODE_MASK (0x07 << MCP2515_CANSTAT_MODE_POS)
#define MCP2515_CANCTRL_MODE_POS 5
#define MCP2515_CANCTRL_MODE_MASK (0x07 << MCP2515_CANCTRL_MODE_POS)
#define MCP2515_TXBNCTRL_TXREQ_POS 3
#define MCP2515_TXBNCTRL_TXREQ_MASK (0x01 << MCP2515_TXBNCTRL_TXREQ_POS)
#endif /*_MCP2515_H_*/