michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: nxp: mimxrt1060_evk: remove display definition

Browse source 
Remove display definition for the RT1060 EVK. This display panel is now
supported as the RK043FN02H-CT shield. Add this information to the
documentation for the board, along with other tested shields.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit is contained in:
Daniel DeGrasse 2024-04-30 19:57:39 +00:00 • committed by Alberto Escolar
commit 6c95c82604
3 changed files with 3 additions and 93 deletions
Download patch file Download diff file Expand all files Collapse all files

45
boards/nxp/mimxrt1060_evk/Kconfig.defconfig
View file

@ -11,16 +11,6 @@ config DEVICE_CONFIGURATION_DATA
config NXP_IMX_EXTERNAL_SDRAM
default y
config INPUT
default y if LVGL
if INPUT
config INPUT_FT5336_INTERRUPT
default y
endif # INPUT
if NETWORKING
config NET_L2_ETHERNET
@ -35,39 +25,4 @@ endif # ETH_MCUX
endif # NETWORKING
if LVGL
# LVGL should allocate buffers equal to size of display
config LV_Z_VDB_SIZE
default 100
# Enable double buffering
config LV_Z_DOUBLE_VDB
default y
# Force full refresh. This prevents memory copy associated with partial
# display refreshes, which is not necessary for the eLCDIF driver
config LV_Z_FULL_REFRESH
default y
config LV_DPI_DEF
default 128
config LV_Z_BITS_PER_PIXEL
default 16
# Force display buffers to be aligned to cache line size (32 bytes)
config LV_Z_VDB_ALIGN
default 32
# Use offloaded render thread
config LV_Z_FLUSH_THREAD
default y
choice LV_COLOR_DEPTH
default LV_COLOR_DEPTH_16
endchoice
endif # LVGL
endif # BOARD_MIMXRT1060_EVK || BOARD_MIMXRT1060_EVKB

4
boards/nxp/mimxrt1060_evk/doc/index.rst
View file

@ -115,7 +115,9 @@ already supported, which can also be re-used on this mimxrt1060_evk board:
+-----------+------------+-------------------------------------+
| SYSTICK | on-chip | systick |
+-----------+------------+-------------------------------------+
| DISPLAY | on-chip | display |
| DISPLAY | on-chip | eLCDIF. Tested with |
| | | :ref:`rk043fn02h_ct`, and |
| | | :ref:`rk043fn66hs_ctg` shields |
+-----------+------------+-------------------------------------+
| FLASH | on-chip | QSPI flash |
+-----------+------------+-------------------------------------+

47
boards/nxp/mimxrt1060_evk/mimxrt1060_evk.dts
View file

@ -8,7 +8,6 @@
#include <nxp/nxp_rt1060.dtsi>
#include "mimxrt1060_evk-pinctrl.dtsi"
#include <zephyr/dt-bindings/display/panel.h>
#include <zephyr/dt-bindings/input/input-event-codes.h>
/ {
@ -30,7 +29,6 @@
zephyr,console = &lpuart1;
zephyr,shell-uart = &lpuart1;
zephyr,canbus = &flexcan3;
zephyr,display = &lcdif;
};
sdram0: memory@80000000 {
@ -90,11 +88,6 @@
};
};
lvgl_pointer {
compatible = "zephyr,lvgl-pointer-input";
input = <&ft5336>;
};
arduino_header: connector {
compatible = "arduino-header-r3";
#gpio-cells = <2>;
@ -123,15 +116,6 @@
<20 0 &gpio1 17 0>, /* D14 */
<21 0 &gpio1 16 0>; /* D15 */
};
panel {
compatible = "rocktech,rk043fn02h-ct";
port {
lcd_panel_in: endpoint {
remote-endpoint = <&lcd_panel_out>;
};
};
};
};
arduino_serial: &lpuart3 {
@ -142,33 +126,8 @@ arduino_serial: &lpuart3 {
};
zephyr_lcdif: &lcdif {
status = "okay";
width = <480>;
height = <272>;
display-timings {
compatible = "zephyr,panel-timing";
hsync-len = <41>;
hfront-porch = <4>;
hback-porch = <8>;
vsync-len = <10>;
vfront-porch = <4>;
vback-porch = <2>;
de-active= <1>;
pixelclk-active = <1>;
hsync-active = <0>;
vsync-active = <0>;
clock-frequency = <9210240>;
};
pixel-format = <PANEL_PIXEL_FORMAT_BGR_565>;
data-bus-width = "16-bit";
pinctrl-0 = <&pinmux_lcdif>;
pinctrl-names = "default";
backlight-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
port {
lcd_panel_out: endpoint {
remote-endpoint = <&lcd_panel_in>;
};
};
};
nxp_touch_i2c: &lpi2c1 {};
@ -177,12 +136,6 @@ arduino_i2c: &lpi2c1 {
status = "okay";
pinctrl-0 = <&pinmux_lpi2c1>;
pinctrl-names = "default";
ft5336: ft5336@38 {
compatible = "focaltech,ft5336";
reg = <0x38>;
int-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
&lpuart1 {