michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: arm: Add mcuboot flash partitions to mimxrt1064_evk

Browse source 
Adds flash partitions and chosen nodes to the mimxrt1064_evk device tree
to support mcuboot on the internal QSPI flash. This flash is rated for
100K minimum program-erase cycles per sector, therefore this partition
configuration supports approximately 100K / (1984/64) = 3225 upgrades.

Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit is contained in:
Maureen Helm 2021-05-04 19:19:29 -05:00 • committed by Anas Nashif
commit 6a9dc2ae57
2 changed files with 35 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

3
boards/arm/mimxrt1064_evk/Kconfig.defconfig
View file

@ -18,6 +18,9 @@ config DISK_DRIVER_SDMMC
config FLASH_MCUX_FLEXSPI_NOR config FLASH_MCUX_FLEXSPI_NOR
default y if FLASH default y if FLASH
config FLASH_MCUX_FLEXSPI_XIP
default y if FLASH
config I2C config I2C
default y if KSCAN default y if KSCAN

32
boards/arm/mimxrt1064_evk/mimxrt1064_evk.dts
View file

@ -20,6 +20,9 @@
}; };
chosen { chosen {
zephyr,flash-controller = &flexspi2;
zephyr,flash = &w25q32jvwj0;
zephyr,code-partition = &slot0_partition;
zephyr,sram = &sdram0; zephyr,sram = &sdram0;
zephyr,itcm = &itcm; zephyr,itcm = &itcm;
zephyr,dtcm = &dtcm; zephyr,dtcm = &dtcm;
@ -160,6 +163,35 @@ arduino_i2c: &lpi2c1 {};
}; };
}; };
&flexspi2 {
status = "okay";
};
&w25q32jvwj0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x00000000 DT_SIZE_K(64)>;
};
slot0_partition: partition@10000 {
label = "image-0";
reg = <0x00010000 DT_SIZE_K(1984)>;
};
slot1_partition: partition@200000 {
label = "image-1";
reg = <0x00200000 DT_SIZE_K(1984)>;
};
scratch_partition: partition@3f0000 {
label = "image-scratch";
reg = <0x003f0000 DT_SIZE_K(64)>;
};
};
};
&lpuart1 { &lpuart1 {
status = "okay"; status = "okay";
current-speed = <115200>; current-speed = <115200>;