diff --git a/boards/arm/adafruit_feather_nrf52840/board.cmake b/boards/arm/adafruit_feather_nrf52840/board.cmake
index 62c7a4f370d..c351ecd3a0b 100644
--- a/boards/arm/adafruit_feather_nrf52840/board.cmake
+++ b/boards/arm/adafruit_feather_nrf52840/board.cmake
@@ -2,7 +2,6 @@
 
 board_runner_args(jlink "--device=nRF52840_xxAA" "--speed=4000")
 board_runner_args(pyocd "--target=nrf52840" "--frequency=4000000")
-board_runner_args(blackmagicprobe "--gdb-serial=/dev/ttyBmpGdb")
 include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
diff --git a/boards/arm/lora_e5_dev_board/board.cmake b/boards/arm/lora_e5_dev_board/board.cmake
index 67c7ed36322..ac24f811559 100644
--- a/boards/arm/lora_e5_dev_board/board.cmake
+++ b/boards/arm/lora_e5_dev_board/board.cmake
@@ -5,7 +5,7 @@ board_runner_args(pyocd "--flash-opt=-O reset_type=hw")
 board_runner_args(pyocd "--flash-opt=-O connect_mode=under-reset")
 board_runner_args(jlink "--device=STM32WLE5JC" "--speed=4000" "--reset-after-load")
 board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw")
-board_runner_args(blackmagicprobe "--gdb-serial=/dev/ttyBmpGdb" "--connect-rst")
+board_runner_args(blackmagicprobe "--connect-rst")
 
 include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
diff --git a/boards/arm/rpi_pico/board.cmake b/boards/arm/rpi_pico/board.cmake
index 1b1b7245f2e..7ed958be76b 100644
--- a/boards/arm/rpi_pico/board.cmake
+++ b/boards/arm/rpi_pico/board.cmake
@@ -27,8 +27,6 @@ board_runner_args(openocd --cmd-pre-init "set_adapter_speed_if_not_set 2000")
 
 board_runner_args(jlink "--device=RP2040_M0_0")
 
-board_runner_args(blackmagicprobe "--gdb-serial=/dev/ttyBmpGdb")
-
 include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)