diff --git a/arch/arm/soc/nxp_kinetis/Kconfig b/arch/arm/soc/nxp_kinetis/Kconfig index f7bf5a30cb3..6f3e29d6461 100644 --- a/arch/arm/soc/nxp_kinetis/Kconfig +++ b/arch/arm/soc/nxp_kinetis/Kconfig @@ -23,39 +23,39 @@ config SOC_PART_NUMBER default SOC_PART_NUMBER_KINETIS_K6X if SOC_SERIES_KINETIS_K6X default SOC_PART_NUMBER_KINETIS_KWX if SOC_SERIES_KINETIS_KWX help - This string holds the full part number of the SoC. It is a hidden option - that you should not set directly. The part number selection choice defines - the default value for this string. + This string holds the full part number of the SoC. It is a hidden option + that you should not set directly. The part number selection choice defines + the default value for this string. config HAS_OSC bool default n help - Set if the oscillator (OSC) module is present in the SoC. + Set if the oscillator (OSC) module is present in the SoC. config HAS_MCG bool default n help - Set if the multipurpose clock generator (MCG) module is present in the SoC. + Set if the multipurpose clock generator (MCG) module is present in the SoC. config HAS_RNGA bool default n help - Set if the random number generator accelerator (RNGA) module is present in the SoC. + Set if the random number generator accelerator (RNGA) module is present in the SoC. config HAS_TRNG bool default n help - Set if the true random number generator (TRNG) module is present in the SoC. + Set if the true random number generator (TRNG) module is present in the SoC. config HAS_LPUART bool default n help - Set if the low power uart (LPUART) module is present in the SoC. + Set if the low power uart (LPUART) module is present in the SoC. if HAS_OSC @@ -66,25 +66,25 @@ choice config OSC_EXTERNAL bool "External reference clock" help - Set this option to use the oscillator in external reference clock mode. + Set this option to use the oscillator in external reference clock mode. config OSC_LOW_POWER bool "Low power oscillator" help - Set this option to use the oscillator in low-power mode. + Set this option to use the oscillator in low-power mode. config OSC_HIGH_GAIN bool "High gain oscillator" help - Set this option to use the oscillator in high-gain mode. + Set this option to use the oscillator in high-gain mode. endchoice config OSC_XTAL0_FREQ int "External oscillator frequency" help - Set the external oscillator frequency in Hz. This should be set by the - board's defconfig. + Set the external oscillator frequency in Hz. This should be set by the + board's defconfig. endif # HAS_OSC @@ -95,33 +95,33 @@ config MCG_PRDIV0 range 0 0x18 default 0 help - Selects the amount to divide down the external reference clock for the PLL. - The resulting frequency must be in the range of 2 MHz to 4 MHz. + Selects the amount to divide down the external reference clock for the PLL. + The resulting frequency must be in the range of 2 MHz to 4 MHz. config MCG_VDIV0 hex "VCO 0 divider" range 0 0x1F default 0 help - Selects the amount to divide the VCO output of the PLL. The VDIV 0 bits - establish the multiplication factor (M) applied to the reference clock - frequency. + Selects the amount to divide the VCO output of the PLL. The VDIV 0 bits + establish the multiplication factor (M) applied to the reference clock + frequency. config MCG_FCRDIV int "Fast internal reference clock divider" range 0 7 default 1 help - Selects the amount to divide down the fast internal reference clock. The - resulting frequency must be in the range 31.25 kHz to 4 MHz. + Selects the amount to divide down the fast internal reference clock. The + resulting frequency must be in the range 31.25 kHz to 4 MHz. config MCG_FRDIV int "FLL external reference divider" range 0 7 default 0 help - Selects the amount to divide down the external reference clock for the - FLL. The resulting frequency must be in the range 31.25 kHz to 39.0625 - kHz. + Selects the amount to divide down the external reference clock for the + FLL. The resulting frequency must be in the range 31.25 kHz to 39.0625 + kHz. endif # HAS_MCG diff --git a/arch/arm/soc/nxp_kinetis/k6x/Kconfig.series b/arch/arm/soc/nxp_kinetis/k6x/Kconfig.series index 74e0aed25e7..8b01a2175d9 100644 --- a/arch/arm/soc/nxp_kinetis/k6x/Kconfig.series +++ b/arch/arm/soc/nxp_kinetis/k6x/Kconfig.series @@ -13,4 +13,4 @@ config SOC_SERIES_KINETIS_K6X select SYS_POWER_LOW_POWER_STATE_SUPPORTED select CPU_HAS_SYSTICK help - Enable support for Kinetis K6x MCU series + Enable support for Kinetis K6x MCU series diff --git a/arch/arm/soc/nxp_kinetis/k6x/Kconfig.soc b/arch/arm/soc/nxp_kinetis/k6x/Kconfig.soc index 1c948d7ed17..01185c1a168 100644 --- a/arch/arm/soc/nxp_kinetis/k6x/Kconfig.soc +++ b/arch/arm/soc/nxp_kinetis/k6x/Kconfig.soc @@ -60,58 +60,58 @@ config SOC_PART_NUMBER_KINETIS_K6X default "MK64FX512VLQ12" if SOC_PART_NUMBER_MK64FX512VLQ12 default "MK64FX512VMD12" if SOC_PART_NUMBER_MK64FX512VMD12 help - This string holds the full part number of the SoC. It is a hidden option - that you should not set directly. The part number selection choice defines - the default value for this string. + This string holds the full part number of the SoC. It is a hidden option + that you should not set directly. The part number selection choice defines + the default value for this string. config K64_CORE_CLOCK_DIVIDER int prompt "Freescale K64 core clock divider" default 1 help - This option specifies the divide value for the K64 processor core clock - from the system clock. + This option specifies the divide value for the K64 processor core clock + from the system clock. config K64_BUS_CLOCK_DIVIDER int prompt "Freescale K64 bus clock divider" default 2 help - This option specifies the divide value for the K64 bus clock from the - system clock. + This option specifies the divide value for the K64 bus clock from the + system clock. config K64_FLEXBUS_CLOCK_DIVIDER int prompt "Freescale K64 FlexBus clock divider" default 3 help - This option specifies the divide value for the K64 FlexBus clock from the - system clock. + This option specifies the divide value for the K64 FlexBus clock from the + system clock. config K64_FLASH_CLOCK_DIVIDER int prompt "Freescale K64 flash clock divider" default 5 help - This option specifies the divide value for the K64 flash clock from the - system clock. + This option specifies the divide value for the K64 flash clock from the + system clock. config WDOG_INIT def_bool y # omit prompt to signify a "hidden" option help - This processor enables the watchdog timer with a short timeout - upon reset. Therefore, this requires that the watchdog be configured - during reset handling. + This processor enables the watchdog timer with a short timeout + upon reset. Therefore, this requires that the watchdog be configured + during reset handling. config PRESERVE_JTAG_IO_PINS bool "Kinetis K6x JTAG pin usage" depends on PINMUX default y help - The FRDM-K64F board routes the PTA0/1/2 pins as JTAG/SWD signals that - are used for the OpenSDAv2 debug interface. These pins are also routed to - the Arduino header as D8, D3 and D5, respectively. - Enable this option to preserve these pins for the debug interface. + The FRDM-K64F board routes the PTA0/1/2 pins as JTAG/SWD signals that + are used for the OpenSDAv2 debug interface. These pins are also routed to + the Arduino header as D8, D3 and D5, respectively. + Enable this option to preserve these pins for the debug interface. endif # SOC_SERIES_KINETIS_K6X diff --git a/arch/arm/soc/nxp_kinetis/kwx/Kconfig.series b/arch/arm/soc/nxp_kinetis/kwx/Kconfig.series index df9fc11ca16..989381103a6 100644 --- a/arch/arm/soc/nxp_kinetis/kwx/Kconfig.series +++ b/arch/arm/soc/nxp_kinetis/kwx/Kconfig.series @@ -12,4 +12,4 @@ config SOC_SERIES_KINETIS_KWX select SYS_POWER_LOW_POWER_STATE_SUPPORTED select CPU_HAS_SYSTICK help - Enable support for Kinetis KWx MCU series + Enable support for Kinetis KWx MCU series diff --git a/arch/arm/soc/nxp_kinetis/kwx/Kconfig.soc b/arch/arm/soc/nxp_kinetis/kwx/Kconfig.soc index 6f8261a7961..71e8e230896 100644 --- a/arch/arm/soc/nxp_kinetis/kwx/Kconfig.soc +++ b/arch/arm/soc/nxp_kinetis/kwx/Kconfig.soc @@ -33,8 +33,8 @@ config SOC_PART_NUMBER_KINETIS_KWX default "MKW41Z256VHT4" if SOC_PART_NUMBER_MKW41Z256VHT4 default "MKW41Z512VHT4" if SOC_PART_NUMBER_MKW41Z512VHT4 help - This string holds the full part number of the SoC. It is a hidden option - that you should not set directly. The part number selection choice defines - the default value for this string. + This string holds the full part number of the SoC. It is a hidden option + that you should not set directly. The part number selection choice defines + the default value for this string. endif # SOC_SERIES_KINETIS_KWX