Bluetooth: nble: Make GAP coding style consistent

Remove extra spaces and make code readable

Change-Id: I3e57a5440476eb0143d19ce9865d3a76c58b90d1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit is contained in:
Andrei Emeltchenko 2016-01-25 11:51:42 +02:00 committed by Anas Nashif
commit 64b1989f56

View file

@ -241,7 +241,7 @@ void on_nble_up(void);
* The response to this request is received through
* @ref on_ble_gap_service_write_rsp
*
* @param par data of the characteristic to write
* @param par Data of the characteristic to write
* @param user_data User data
*/
void ble_gap_service_write_req(const struct ble_gap_service_write_params *par,
@ -266,7 +266,7 @@ void on_ble_gap_service_write_rsp(const struct ble_service_write_response *par);
*
* The response to this request is received through @ref on_ble_gap_dbg_rsp
*
* @param par debug parameters
* @param par Debug parameters
* @param user_data User data
*/
void ble_gap_dbg_req(const struct debug_params *par, void *user_data);
@ -287,8 +287,8 @@ void on_ble_gap_dbg_rsp(const struct debug_response *par);
* This shall put the controller stack into a usable (enabled) state.
* Hence this should be called first!
*
* @param config BLE write configuration
* @param user_data User data
* @param config BLE write configuration
* @param user_data User data
*
*/
void ble_set_enable_config_req(const struct ble_wr_config_params *config,
@ -300,7 +300,7 @@ void ble_set_enable_config_req(const struct ble_wr_config_params *config,
* The response to this request is received through
* @ref on_ble_gap_start_advertise_rsp
*
* @param par advertisement
* @param par Advertisement
* @param p_adv_data Pointer to advertisement and scan response data
*/
void ble_gap_start_advertise_req(struct ble_gap_adv_params *par);
@ -315,7 +315,7 @@ void on_ble_gap_start_advertise_rsp(const struct ble_core_response *par);
/**
* Request to stop advertisement
*
* @param user_data pointer to private data
* @param user_data Pointer to private data
*/
void ble_gap_stop_advertise_req(void *user_data);
@ -348,11 +348,11 @@ struct ble_gap_irk_info {
* Store white in BLE controller. It needs to be done BEFORE starting
* advertisement or start scanning
*
* @param bd_array array of bd addresses
* @param bd_array_size size of bd addresses array
* @param irk_array array of irk keys (for address resolution offload)
* @param irk_array_size size of irk keys array
* @param priv pointer to private data
* @param bd_array Array of bd addresses
* @param bd_array_size Size of bd addresses array
* @param irk_array Array of irk keys (for address resolution offload)
* @param irk_array_size Size of irk keys array
* @param priv Pointer to private data
*/
void ble_gap_wr_white_list_req(bt_addr_le_t *bd_array, uint8_t bd_array_size,
struct ble_gap_irk_info *irk_array,
@ -486,7 +486,7 @@ struct ble_core_gap_sm_config_params {
* The response to this request is received through
* @ref on_ble_gap_sm_config_rsp
*
* @param par local authentication/bonding parameters
* @param par Local authentication/bonding parameters
* @param user_data User data
*/
void ble_gap_sm_config_req(const struct ble_core_gap_sm_config_params *par,
@ -563,7 +563,7 @@ struct ble_gap_sm_key_reply_req_params {
* The response to this request is received through
* @ref on_ble_gap_sm_passkey_reply_rsp
*
* @param par connection on which bonding is going on and bonding security
* @param par Connection on which bonding is going on and bonding security
* reply
* @param user_data User data
*/
@ -598,19 +598,21 @@ void on_ble_gap_sm_clear_bonds_rsp(const struct ble_core_response *par);
* RSSI report parameters
*/
struct ble_core_rssi_report_params {
uint16_t conn_handle; /**< Connection handle */
uint8_t op; /**< RSSI operation @ref BLE_GAP_RSSI_OPS */
uint8_t delta_dBm; /**< minimum RSSI dBm change to report a new RSSI value */
uint8_t min_count; /**< number of delta_dBm changes before sending a new RSSI report */
uint16_t conn_handle; /**< Connection handle */
uint8_t op; /**< RSSI operation @ref BLE_GAP_RSSI_OPS */
uint8_t delta_dBm; /**< minimum RSSI dBm change report new val */
/**< number of delta_dBm changes before sending a new RSSI report */
uint8_t min_count;
};
/**
* Enable or disable the reporting of the RSSI value.
*
* The response to this request is received through @ref on_ble_gap_set_rssi_report_rsp
* The response to this request is received through
* @ref on_ble_gap_set_rssi_report_rsp
*
* @param params RSSI report parameters
* @param user_data pointer to user data
* @param user_data Pointer to user data
*/
void ble_gap_set_rssi_report_req(const struct ble_core_rssi_report_params *par,
void *user_data);
@ -644,7 +646,7 @@ struct ble_gap_scan_params {
* The response to this request is received through
* @ref on_ble_gap_start_scan_rsp
*
* @param par scan parameters
* @param par Scan parameters
* @param user_data Pointer to user data
*/
void ble_gap_start_scan_req(const struct ble_gap_scan_params *par, void *priv);
@ -700,7 +702,7 @@ struct ble_gap_cancel_connect_params {
* The response to this request is received through
* @ref on_ble_gap_cancel_connect_rsp
*
* @param par contains address of device for which the connection shall
* @param par Contains address of device for which the connection shall
* be canceled
* @param user_data Pointer to user data
*/
@ -737,7 +739,7 @@ struct ble_gap_set_option_params {
* The response to this request is received through
* @ref on_ble_gap_set_option_rsp
*
* @param par contains gap options parameters
* @param par Contains gap options parameters
* @param user_data Pointer to user data
*/
void ble_gap_set_option_req(const struct ble_gap_set_option_params *par,
@ -768,7 +770,7 @@ struct ble_gap_gen_cmd_params {
* The response to this request is received through
* @ref on_ble_gap_generic_cmd_rsp
*
* @param par contains Generic command parameters.
* @param par Contains Generic command parameters.
* @param user_data Pointer to user data
*/
void ble_gap_generic_cmd_req(const struct ble_gap_gen_cmd_params *par,