michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: mini_stm32h7b0: use board common CDC ACM UART configuration

Browse source 
Remove USB and CDC ACM configuration in favor of common
configuraiton. This is a follow up to commit 272290bfee
("boards: use board common CDC ACM UART configuration")
Support for this board was merged just before the common solution was
introduced.

Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit is contained in:
Johann Fischer 2025-02-18 13:01:06 +01:00 • committed by Carles Cufí
commit 5f7713815a
3 changed files with 2 additions and 27 deletions
Download patch file Download diff file Expand all files Collapse all files

10
boards/weact/mini_stm32h7b0/Kconfig.defconfig
View file

@ -22,14 +22,6 @@ endif # LVGL
endif # DISPLAY endif # DISPLAY
if USB_DEVICE_STACK source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig"
config UART_CONSOLE
default CONSOLE
config USB_DEVICE_INITIALIZE_AT_BOOT
default y
endif # USB_DEVICE_STACK
endif # BOARD_MINI_STM32H7B0 endif # BOARD_MINI_STM32H7B0

7
boards/weact/mini_stm32h7b0/mini_stm32h7b0.dts
View file

@ -15,8 +15,6 @@
compatible = "weact,mini-stm32h7b0"; compatible = "weact,mini-stm32h7b0";
chosen { chosen {
zephyr,console = &usb_cdc_acm_uart;
zephyr,shell-uart = &usb_cdc_acm_uart;
zephyr,sram = &sram0; zephyr,sram = &sram0;
zephyr,flash = &flash0; zephyr,flash = &flash0;
zephyr,display = &st7735r_160x80; zephyr,display = &st7735r_160x80;
@ -132,12 +130,9 @@ zephyr_udc0: &usbotg_hs {
pinctrl-0 = <&usb_otg_hs_dm_pa11 &usb_otg_hs_dp_pa12>; pinctrl-0 = <&usb_otg_hs_dm_pa11 &usb_otg_hs_dp_pa12>;
pinctrl-names = "default"; pinctrl-names = "default";
status = "okay"; status = "okay";
usb_cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
};
}; };
#include <../boards/common/usb/cdc_acm_serial.dtsi>
&octospi1 { &octospi1 {
pinctrl-names = "default"; pinctrl-names = "default";

12
boards/weact/mini_stm32h7b0/mini_stm32h7b0_defconfig
View file

@ -7,17 +7,5 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection # Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y CONFIG_HW_STACK_PROTECTION=y
# Enable UART driver
CONFIG_SERIAL=y
# Enable console
CONFIG_CONSOLE=y
# Enable GPIO # Enable GPIO
CONFIG_GPIO=y CONFIG_GPIO=y
# Logger cannot use itself to log
CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y
# Enable USB
CONFIG_USB_DEVICE_STACK=y