drivers/uart: stm32: Fix comparisons to have constants on right side

Fixes: "WARNING:CONSTANT_COMPARISON: Comparisons should place the
constant on the right side of the test"

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit is contained in:
Erwan Gouriou 2021-02-11 09:55:38 +01:00 committed by Anas Nashif
commit 5e561708c4

View file

@ -306,45 +306,45 @@ static int uart_stm32_configure(const struct device *dev,
const uint32_t flowctrl = uart_stm32_cfg2ll_hwctrl(cfg->flow_ctrl);
/* Hardware doesn't support mark or space parity */
if ((UART_CFG_PARITY_MARK == cfg->parity) ||
(UART_CFG_PARITY_SPACE == cfg->parity)) {
if ((cfg->parity == UART_CFG_PARITY_MARK) ||
(cfg->parity == UART_CFG_PARITY_SPACE)) {
return -ENOTSUP;
}
#if defined(LL_USART_STOPBITS_0_5) && HAS_LPUART_1
if (IS_LPUART_INSTANCE(UartInstance) &&
UART_CFG_STOP_BITS_0_5 == cfg->stop_bits) {
(cfg->stop_bits == UART_CFG_STOP_BITS_0_5)) {
return -ENOTSUP;
}
#else
if (UART_CFG_STOP_BITS_0_5 == cfg->stop_bits) {
if (cfg->stop_bits == UART_CFG_STOP_BITS_0_5) {
return -ENOTSUP;
}
#endif
#if defined(LL_USART_STOPBITS_1_5) && HAS_LPUART_1
if (IS_LPUART_INSTANCE(UartInstance) &&
UART_CFG_STOP_BITS_1_5 == cfg->stop_bits) {
(cfg->stop_bits == UART_CFG_STOP_BITS_1_5)) {
return -ENOTSUP;
}
#else
if (UART_CFG_STOP_BITS_1_5 == cfg->stop_bits) {
if (cfg->stop_bits == UART_CFG_STOP_BITS_1_5) {
return -ENOTSUP;
}
#endif
/* Driver doesn't support 5 or 6 databits and potentially 7 or 9 */
if ((UART_CFG_DATA_BITS_5 == cfg->data_bits) ||
(UART_CFG_DATA_BITS_6 == cfg->data_bits)
if ((cfg->data_bits == UART_CFG_DATA_BITS_5) ||
(cfg->data_bits == UART_CFG_DATA_BITS_6)
#ifndef LL_USART_DATAWIDTH_7B
|| (UART_CFG_DATA_BITS_7 == cfg->data_bits)
|| (cfg->data_bits == UART_CFG_DATA_BITS_7)
#endif /* LL_USART_DATAWIDTH_7B */
|| (UART_CFG_DATA_BITS_9 == cfg->data_bits)) {
|| (cfg->data_bits == UART_CFG_DATA_BITS_9)) {
return -ENOTSUP;
}
/* Driver supports only RTS CTS flow control */
if (UART_CFG_FLOW_CTRL_NONE != cfg->flow_ctrl) {
if (cfg->flow_ctrl != UART_CFG_FLOW_CTRL_NONE) {
if (!IS_UART_HWFLOW_INSTANCE(UartInstance) ||
UART_CFG_FLOW_CTRL_RTS_CTS != cfg->flow_ctrl) {
return -ENOTSUP;