diff --git a/boards/arm/nucleo_f412zg/doc/index.rst b/boards/arm/nucleo_f412zg/doc/index.rst
index 37a786f643d..c67e8d29f5d 100644
--- a/boards/arm/nucleo_f412zg/doc/index.rst
+++ b/boards/arm/nucleo_f412zg/doc/index.rst
@@ -133,7 +133,7 @@ Default Zephyr Peripheral Mapping:
 - UART_3 TX/RX : PD8/PD9 (ST-Link Virtual Port Com)
 - UART_6 TX/RX : PG14/PG9 (Arduino Serial)
 - I2C1 SCL/SDA : PB8/PB9 (Arduino I2C)
-- SPI1 NSS/SCK/MISO/MOSI : PA4/PA5/PA6/PA7 (Arduino SPI)
+- SPI1 NSS/SCK/MISO/MOSI : PD14/PA5/PA6/PA7 (Arduino SPI)
 - PWM_2_CH1 : PA0
 - USER_PB : PC13
 - LD1 : PB0
diff --git a/boards/arm/nucleo_f412zg/nucleo_f412zg.dts b/boards/arm/nucleo_f412zg/nucleo_f412zg.dts
index 6c4bad47bfe..7be09a6bac8 100644
--- a/boards/arm/nucleo_f412zg/nucleo_f412zg.dts
+++ b/boards/arm/nucleo_f412zg/nucleo_f412zg.dts
@@ -94,8 +94,8 @@
 };
 
 &spi1 {
-	pinctrl-0 = <&spi1_nss_pa4 &spi1_sck_pa5
-		     &spi1_miso_pa6 &spi1_mosi_pa7>;
+	pinctrl-0 = <&spi1_sck_pa5 &spi1_miso_pa6 &spi1_mosi_pa7>;
+	cs-gpios = <&gpiod 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	status = "okay";
 };