drivers: regulator: npm6001: format code
Format code using clang-format. This will ease incoming refactor. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit is contained in:
Gerard Marull-Paretas
Anas Nashif
parent
9c340776ff
commit
5521db3576
1 changed files with 141 additions and 191 deletions
|
|
@ -29,41 +29,40 @@ enum npm6001_sources {
|
|||
#define NPM6001_TASKS_START_LDO0 0x03U
|
||||
#define NPM6001_TASKS_START_LDO1 0x04U
|
||||
#define NPM6001_TASKS_STOP_BUCK3 0x08U
|
||||
#define NPM6001_TASKS_STOP_LDO0 0x09U
|
||||
#define NPM6001_TASKS_STOP_LDO1 0x0AU
|
||||
#define NPM6001_TASKS_STOP_LDO0 0x09U
|
||||
#define NPM6001_TASKS_STOP_LDO1 0x0AU
|
||||
#define NPM6001_TASKS_UPDATE_VOUTPWM 0x0EU
|
||||
#define NPM6001_EVENTS_THWARN 0x1EU
|
||||
#define NPM6001_EVENTS_BUCK0OC 0x1FU
|
||||
#define NPM6001_EVENTS_BUCK1OC 0x20U
|
||||
#define NPM6001_EVENTS_BUCK2OC 0x21U
|
||||
#define NPM6001_EVENTS_BUCK3OC 0x22U
|
||||
#define NPM6001_BUCK0VOUTULP 0x3AU
|
||||
#define NPM6001_BUCK1VOUTULP 0x3CU
|
||||
#define NPM6001_BUCK2VOUTULP 0x40U
|
||||
#define NPM6001_BUCK3SELDAC 0x44U
|
||||
#define NPM6001_BUCK3VOUT 0x45U
|
||||
#define NPM6001_LDO0VOUT 0x46U
|
||||
#define NPM6001_EVENTS_THWARN 0x1EU
|
||||
#define NPM6001_EVENTS_BUCK0OC 0x1FU
|
||||
#define NPM6001_EVENTS_BUCK1OC 0x20U
|
||||
#define NPM6001_EVENTS_BUCK2OC 0x21U
|
||||
#define NPM6001_EVENTS_BUCK3OC 0x22U
|
||||
#define NPM6001_BUCK0VOUTULP 0x3AU
|
||||
#define NPM6001_BUCK1VOUTULP 0x3CU
|
||||
#define NPM6001_BUCK2VOUTULP 0x40U
|
||||
#define NPM6001_BUCK3SELDAC 0x44U
|
||||
#define NPM6001_BUCK3VOUT 0x45U
|
||||
#define NPM6001_LDO0VOUT 0x46U
|
||||
#define NPM6001_BUCK0CONFPWMMODE 0x4AU
|
||||
#define NPM6001_BUCK1CONFPWMMODE 0x4BU
|
||||
#define NPM6001_BUCK2CONFPWMMODE 0x4CU
|
||||
#define NPM6001_BUCK3CONFPWMMODE 0x4DU
|
||||
#define NPM6001_BUCKMODEPADCONF 0x4EU
|
||||
#define NPM6001_BUCKMODEPADCONF 0x4EU
|
||||
#define NPM6001_PADDRIVESTRENGTH 0x53U
|
||||
#define NPM6001_OVERRIDEPWRUPBUCK 0xABU
|
||||
|
||||
/* nPM6001 LDO0VOUT values */
|
||||
#define NPM6001_LDO0VOUT_SET1V8 0x06U
|
||||
#define NPM6001_LDO0VOUT_SET2V1 0x0BU
|
||||
#define NPM6001_LDO0VOUT_SET1V8 0x06U
|
||||
#define NPM6001_LDO0VOUT_SET2V1 0x0BU
|
||||
#define NPM6001_LDO0VOUT_SET2V41 0x10U
|
||||
#define NPM6001_LDO0VOUT_SET2V7 0x15U
|
||||
#define NPM6001_LDO0VOUT_SET3V0 0x1AU
|
||||
#define NPM6001_LDO0VOUT_SET3V3 0x1EU
|
||||
#define NPM6001_LDO0VOUT_SET2V7 0x15U
|
||||
#define NPM6001_LDO0VOUT_SET3V0 0x1AU
|
||||
#define NPM6001_LDO0VOUT_SET3V3 0x1EU
|
||||
|
||||
/* nPM6001 BUCKXCONFPWMMODE fields */
|
||||
#define NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM_MSK 0x8U
|
||||
#define NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM_POS 3
|
||||
#define NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM \
|
||||
BIT(NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM_POS)
|
||||
#define NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM BIT(NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM_POS)
|
||||
|
||||
#define NPM6001_BUCKMODEPADCONF_BUCKMODE0PADTYPE_CMOS BIT(0)
|
||||
#define NPM6001_BUCKMODEPADCONF_BUCKMODE1PADTYPE_CMOS BIT(1)
|
||||
|
|
@ -104,29 +103,21 @@ struct regulator_npm6001_vmap {
|
|||
int32_t volt_uv;
|
||||
};
|
||||
|
||||
static const struct linear_range buck0_range =
|
||||
LINEAR_RANGE_INIT(1800000, 100000U, 0x0U, 0xFU);
|
||||
static const struct linear_range buck0_range = LINEAR_RANGE_INIT(1800000, 100000U, 0x0U, 0xFU);
|
||||
|
||||
static const struct linear_range buck1_range =
|
||||
LINEAR_RANGE_INIT(700000, 50000U, 0x0U, 0xEU);
|
||||
static const struct linear_range buck1_range = LINEAR_RANGE_INIT(700000, 50000U, 0x0U, 0xEU);
|
||||
|
||||
static const struct linear_range buck2_range =
|
||||
LINEAR_RANGE_INIT(1200000, 50000U, 0xAU, 0xEU);
|
||||
static const struct linear_range buck2_range = LINEAR_RANGE_INIT(1200000, 50000U, 0xAU, 0xEU);
|
||||
|
||||
static const struct linear_range buck3_range =
|
||||
LINEAR_RANGE_INIT(500000, 25000U, 0x0U, 0x70U);
|
||||
static const struct linear_range buck3_range = LINEAR_RANGE_INIT(500000, 25000U, 0x0U, 0x70U);
|
||||
|
||||
static const struct regulator_npm6001_vmap ldo0_voltages[] = {
|
||||
{ NPM6001_LDO0VOUT_SET1V8, 1800000 },
|
||||
{ NPM6001_LDO0VOUT_SET2V1, 2100000 },
|
||||
{ NPM6001_LDO0VOUT_SET2V41, 2410000 },
|
||||
{ NPM6001_LDO0VOUT_SET2V7, 2700000 },
|
||||
{ NPM6001_LDO0VOUT_SET3V0, 3000000 },
|
||||
{ NPM6001_LDO0VOUT_SET3V3, 3300000 },
|
||||
{NPM6001_LDO0VOUT_SET1V8, 1800000}, {NPM6001_LDO0VOUT_SET2V1, 2100000},
|
||||
{NPM6001_LDO0VOUT_SET2V41, 2410000}, {NPM6001_LDO0VOUT_SET2V7, 2700000},
|
||||
{NPM6001_LDO0VOUT_SET3V0, 3000000}, {NPM6001_LDO0VOUT_SET3V3, 3300000},
|
||||
};
|
||||
|
||||
static int regulator_npm6001_ldo0_list_voltage(const struct device *dev,
|
||||
unsigned int idx,
|
||||
static int regulator_npm6001_ldo0_list_voltage(const struct device *dev, unsigned int idx,
|
||||
int32_t *volt_uv)
|
||||
{
|
||||
if (idx >= ARRAY_SIZE(ldo0_voltages)) {
|
||||
|
|
@ -138,9 +129,9 @@ static int regulator_npm6001_ldo0_list_voltage(const struct device *dev,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int regulator_npm6001_buck012_set_voltage(
|
||||
const struct device *dev, int32_t min_uv, int32_t max_uv,
|
||||
const struct linear_range *range, uint8_t vout_reg, uint8_t conf_reg)
|
||||
static int regulator_npm6001_buck012_set_voltage(const struct device *dev, int32_t min_uv,
|
||||
int32_t max_uv, const struct linear_range *range,
|
||||
uint8_t vout_reg, uint8_t conf_reg)
|
||||
{
|
||||
const struct regulator_npm6001_config *config = dev->config;
|
||||
const struct regulator_npm6001_pconfig *pconfig = config->p->config;
|
||||
|
|
@ -160,9 +151,8 @@ static int regulator_npm6001_buck012_set_voltage(
|
|||
}
|
||||
|
||||
if ((conf & NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM) == 0U) {
|
||||
ret = i2c_reg_write_byte_dt(
|
||||
&pconfig->i2c, conf_reg,
|
||||
conf | NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM);
|
||||
ret = i2c_reg_write_byte_dt(&pconfig->i2c, conf_reg,
|
||||
conf | NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -178,8 +168,7 @@ static int regulator_npm6001_buck012_set_voltage(
|
|||
return ret;
|
||||
}
|
||||
|
||||
ret = i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_TASKS_UPDATE_VOUTPWM,
|
||||
1U);
|
||||
ret = i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_TASKS_UPDATE_VOUTPWM, 1U);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -195,8 +184,8 @@ static int regulator_npm6001_buck012_set_voltage(
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int regulator_npm6001_buck3_set_voltage(const struct device *dev,
|
||||
int32_t min_uv, int32_t max_uv)
|
||||
static int regulator_npm6001_buck3_set_voltage(const struct device *dev, int32_t min_uv,
|
||||
int32_t max_uv)
|
||||
{
|
||||
const struct regulator_npm6001_config *config = dev->config;
|
||||
const struct regulator_npm6001_pconfig *pconfig = config->p->config;
|
||||
|
|
@ -210,31 +199,27 @@ static int regulator_npm6001_buck3_set_voltage(const struct device *dev,
|
|||
}
|
||||
|
||||
/* force PWM mode when updating voltage */
|
||||
ret = i2c_reg_read_byte_dt(&pconfig->i2c, NPM6001_BUCK3CONFPWMMODE,
|
||||
&conf);
|
||||
ret = i2c_reg_read_byte_dt(&pconfig->i2c, NPM6001_BUCK3CONFPWMMODE, &conf);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
|
||||
if ((conf & NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM) == 0U) {
|
||||
ret = i2c_reg_write_byte_dt(
|
||||
&pconfig->i2c, NPM6001_BUCK3CONFPWMMODE,
|
||||
conf | NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM);
|
||||
ret = i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_BUCK3CONFPWMMODE,
|
||||
conf | NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
ret = i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_BUCK3VOUT,
|
||||
(uint8_t)idx);
|
||||
ret = i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_BUCK3VOUT, (uint8_t)idx);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* restore HYS mode if enabled before */
|
||||
if ((conf & NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM) == 0U) {
|
||||
ret = i2c_reg_write_byte_dt(&pconfig->i2c,
|
||||
NPM6001_BUCK3CONFPWMMODE, conf);
|
||||
ret = i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_BUCK3CONFPWMMODE, conf);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -243,8 +228,8 @@ static int regulator_npm6001_buck3_set_voltage(const struct device *dev,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int regulator_npm6001_ldo0_set_voltage(const struct device *dev,
|
||||
int32_t min_uv, int32_t max_uv)
|
||||
static int regulator_npm6001_ldo0_set_voltage(const struct device *dev, int32_t min_uv,
|
||||
int32_t max_uv)
|
||||
{
|
||||
const struct regulator_npm6001_config *config = dev->config;
|
||||
const struct regulator_npm6001_pconfig *pconfig = config->p->config;
|
||||
|
|
@ -252,8 +237,7 @@ static int regulator_npm6001_ldo0_set_voltage(const struct device *dev,
|
|||
size_t i;
|
||||
|
||||
for (i = 0U; i < ARRAY_SIZE(ldo0_voltages); i++) {
|
||||
if ((min_uv <= ldo0_voltages[i].volt_uv) &&
|
||||
(max_uv >= ldo0_voltages[i].volt_uv)) {
|
||||
if ((min_uv <= ldo0_voltages[i].volt_uv) && (max_uv >= ldo0_voltages[i].volt_uv)) {
|
||||
val = ldo0_voltages[i].reg_val;
|
||||
break;
|
||||
}
|
||||
|
|
@ -266,10 +250,9 @@ static int regulator_npm6001_ldo0_set_voltage(const struct device *dev,
|
|||
return i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_LDO0VOUT, val);
|
||||
}
|
||||
|
||||
static int
|
||||
regulator_npm6001_buck0123_get_voltage(const struct device *dev,
|
||||
const struct linear_range *range,
|
||||
uint8_t vout_reg, int32_t *volt_uv)
|
||||
static int regulator_npm6001_buck0123_get_voltage(const struct device *dev,
|
||||
const struct linear_range *range,
|
||||
uint8_t vout_reg, int32_t *volt_uv)
|
||||
{
|
||||
const struct regulator_npm6001_config *config = dev->config;
|
||||
const struct regulator_npm6001_pconfig *pconfig = config->p->config;
|
||||
|
|
@ -284,8 +267,7 @@ regulator_npm6001_buck0123_get_voltage(const struct device *dev,
|
|||
return linear_range_get_value(range, idx, volt_uv);
|
||||
}
|
||||
|
||||
static int regulator_npm6001_ldo0_get_voltage(const struct device *dev,
|
||||
int32_t *volt_uv)
|
||||
static int regulator_npm6001_ldo0_get_voltage(const struct device *dev, int32_t *volt_uv)
|
||||
{
|
||||
const struct regulator_npm6001_config *config = dev->config;
|
||||
const struct regulator_npm6001_pconfig *pconfig = config->p->config;
|
||||
|
|
@ -333,8 +315,8 @@ static unsigned int regulator_npm6001_count_voltages(const struct device *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int regulator_npm6001_list_voltage(const struct device *dev,
|
||||
unsigned int idx, int32_t *volt_uv)
|
||||
static int regulator_npm6001_list_voltage(const struct device *dev, unsigned int idx,
|
||||
int32_t *volt_uv)
|
||||
{
|
||||
const struct regulator_npm6001_config *config = dev->config;
|
||||
|
||||
|
|
@ -344,8 +326,7 @@ static int regulator_npm6001_list_voltage(const struct device *dev,
|
|||
case NPM6001_SOURCE_BUCK1:
|
||||
return linear_range_get_value(&buck1_range, idx, volt_uv);
|
||||
case NPM6001_SOURCE_BUCK2:
|
||||
return linear_range_get_value(
|
||||
&buck2_range, idx + buck2_range.min_idx, volt_uv);
|
||||
return linear_range_get_value(&buck2_range, idx + buck2_range.min_idx, volt_uv);
|
||||
case NPM6001_SOURCE_BUCK3:
|
||||
return linear_range_get_value(&buck3_range, idx, volt_uv);
|
||||
case NPM6001_SOURCE_LDO0:
|
||||
|
|
@ -360,24 +341,23 @@ static int regulator_npm6001_list_voltage(const struct device *dev,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int regulator_npm6001_set_voltage(const struct device *dev,
|
||||
int32_t min_uv, int32_t max_uv)
|
||||
static int regulator_npm6001_set_voltage(const struct device *dev, int32_t min_uv, int32_t max_uv)
|
||||
{
|
||||
const struct regulator_npm6001_config *config = dev->config;
|
||||
|
||||
switch (config->source) {
|
||||
case NPM6001_SOURCE_BUCK0:
|
||||
return regulator_npm6001_buck012_set_voltage(
|
||||
dev, min_uv, max_uv, &buck0_range, NPM6001_BUCK0VOUTULP,
|
||||
NPM6001_BUCK0CONFPWMMODE);
|
||||
return regulator_npm6001_buck012_set_voltage(dev, min_uv, max_uv, &buck0_range,
|
||||
NPM6001_BUCK0VOUTULP,
|
||||
NPM6001_BUCK0CONFPWMMODE);
|
||||
case NPM6001_SOURCE_BUCK1:
|
||||
return regulator_npm6001_buck012_set_voltage(
|
||||
dev, min_uv, max_uv, &buck1_range, NPM6001_BUCK1VOUTULP,
|
||||
NPM6001_BUCK1CONFPWMMODE);
|
||||
return regulator_npm6001_buck012_set_voltage(dev, min_uv, max_uv, &buck1_range,
|
||||
NPM6001_BUCK1VOUTULP,
|
||||
NPM6001_BUCK1CONFPWMMODE);
|
||||
case NPM6001_SOURCE_BUCK2:
|
||||
return regulator_npm6001_buck012_set_voltage(
|
||||
dev, min_uv, max_uv, &buck2_range, NPM6001_BUCK2VOUTULP,
|
||||
NPM6001_BUCK2CONFPWMMODE);
|
||||
return regulator_npm6001_buck012_set_voltage(dev, min_uv, max_uv, &buck2_range,
|
||||
NPM6001_BUCK2VOUTULP,
|
||||
NPM6001_BUCK2CONFPWMMODE);
|
||||
case NPM6001_SOURCE_BUCK3:
|
||||
return regulator_npm6001_buck3_set_voltage(dev, min_uv, max_uv);
|
||||
case NPM6001_SOURCE_LDO0:
|
||||
|
|
@ -394,24 +374,23 @@ static int regulator_npm6001_set_voltage(const struct device *dev,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int regulator_npm6001_get_voltage(const struct device *dev,
|
||||
int32_t *volt_uv)
|
||||
static int regulator_npm6001_get_voltage(const struct device *dev, int32_t *volt_uv)
|
||||
{
|
||||
const struct regulator_npm6001_config *config = dev->config;
|
||||
|
||||
switch (config->source) {
|
||||
case NPM6001_SOURCE_BUCK0:
|
||||
return regulator_npm6001_buck0123_get_voltage(
|
||||
dev, &buck0_range, NPM6001_BUCK0VOUTULP, volt_uv);
|
||||
return regulator_npm6001_buck0123_get_voltage(dev, &buck0_range,
|
||||
NPM6001_BUCK0VOUTULP, volt_uv);
|
||||
case NPM6001_SOURCE_BUCK1:
|
||||
return regulator_npm6001_buck0123_get_voltage(
|
||||
dev, &buck1_range, NPM6001_BUCK1VOUTULP, volt_uv);
|
||||
return regulator_npm6001_buck0123_get_voltage(dev, &buck1_range,
|
||||
NPM6001_BUCK1VOUTULP, volt_uv);
|
||||
case NPM6001_SOURCE_BUCK2:
|
||||
return regulator_npm6001_buck0123_get_voltage(
|
||||
dev, &buck2_range, NPM6001_BUCK2VOUTULP, volt_uv);
|
||||
return regulator_npm6001_buck0123_get_voltage(dev, &buck2_range,
|
||||
NPM6001_BUCK2VOUTULP, volt_uv);
|
||||
case NPM6001_SOURCE_BUCK3:
|
||||
return regulator_npm6001_buck0123_get_voltage(
|
||||
dev, &buck3_range, NPM6001_BUCK3VOUT, volt_uv);
|
||||
return regulator_npm6001_buck0123_get_voltage(dev, &buck3_range, NPM6001_BUCK3VOUT,
|
||||
volt_uv);
|
||||
case NPM6001_SOURCE_LDO0:
|
||||
return regulator_npm6001_ldo0_get_voltage(dev, volt_uv);
|
||||
case NPM6001_SOURCE_LDO1:
|
||||
|
|
@ -424,8 +403,7 @@ static int regulator_npm6001_get_voltage(const struct device *dev,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int regulator_npm6001_set_mode(const struct device *dev,
|
||||
regulator_mode_t mode)
|
||||
static int regulator_npm6001_set_mode(const struct device *dev, regulator_mode_t mode)
|
||||
{
|
||||
const struct regulator_npm6001_config *config = dev->config;
|
||||
const struct regulator_npm6001_pconfig *pconfig = config->p->config;
|
||||
|
|
@ -452,14 +430,12 @@ static int regulator_npm6001_set_mode(const struct device *dev,
|
|||
return -ENOTSUP;
|
||||
}
|
||||
|
||||
return i2c_reg_update_byte_dt(
|
||||
&pconfig->i2c, conf_reg,
|
||||
NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM_MSK,
|
||||
mode << NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM_POS);
|
||||
return i2c_reg_update_byte_dt(&pconfig->i2c, conf_reg,
|
||||
NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM_MSK,
|
||||
mode << NPM6001_BUCKXCONFPWMMODE_SETFORCEPWM_POS);
|
||||
}
|
||||
|
||||
static int regulator_npm6001_get_mode(const struct device *dev,
|
||||
regulator_mode_t *mode)
|
||||
static int regulator_npm6001_get_mode(const struct device *dev, regulator_mode_t *mode)
|
||||
{
|
||||
const struct regulator_npm6001_config *config = dev->config;
|
||||
const struct regulator_npm6001_pconfig *pconfig = config->p->config;
|
||||
|
|
@ -501,22 +477,17 @@ static int regulator_npm6001_enable(const struct device *dev)
|
|||
|
||||
switch (config->source) {
|
||||
case NPM6001_SOURCE_BUCK1:
|
||||
return i2c_reg_update_byte_dt(
|
||||
&pconfig->i2c, NPM6001_OVERRIDEPWRUPBUCK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK1DISABLE_MSK, 0U);
|
||||
return i2c_reg_update_byte_dt(&pconfig->i2c, NPM6001_OVERRIDEPWRUPBUCK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK1DISABLE_MSK, 0U);
|
||||
case NPM6001_SOURCE_BUCK2:
|
||||
return i2c_reg_update_byte_dt(
|
||||
&pconfig->i2c, NPM6001_OVERRIDEPWRUPBUCK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK2DISABLE_MSK, 0U);
|
||||
return i2c_reg_update_byte_dt(&pconfig->i2c, NPM6001_OVERRIDEPWRUPBUCK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK2DISABLE_MSK, 0U);
|
||||
case NPM6001_SOURCE_BUCK3:
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c,
|
||||
NPM6001_TASKS_START_BUCK3, 1U);
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_TASKS_START_BUCK3, 1U);
|
||||
case NPM6001_SOURCE_LDO0:
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c,
|
||||
NPM6001_TASKS_START_LDO0, 1U);
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_TASKS_START_LDO0, 1U);
|
||||
case NPM6001_SOURCE_LDO1:
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c,
|
||||
NPM6001_TASKS_START_LDO1, 1U);
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_TASKS_START_LDO1, 1U);
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -529,24 +500,19 @@ static int regulator_npm6001_disable(const struct device *dev)
|
|||
|
||||
switch (config->source) {
|
||||
case NPM6001_SOURCE_BUCK1:
|
||||
return i2c_reg_update_byte_dt(
|
||||
&pconfig->i2c, NPM6001_OVERRIDEPWRUPBUCK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK1DISABLE_MSK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK1DISABLE);
|
||||
return i2c_reg_update_byte_dt(&pconfig->i2c, NPM6001_OVERRIDEPWRUPBUCK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK1DISABLE_MSK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK1DISABLE);
|
||||
case NPM6001_SOURCE_BUCK2:
|
||||
return i2c_reg_update_byte_dt(
|
||||
&pconfig->i2c, NPM6001_OVERRIDEPWRUPBUCK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK2DISABLE_MSK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK2DISABLE);
|
||||
return i2c_reg_update_byte_dt(&pconfig->i2c, NPM6001_OVERRIDEPWRUPBUCK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK2DISABLE_MSK,
|
||||
NPM6001_OVERRIDEPWRUPBUCK_BUCK2DISABLE);
|
||||
case NPM6001_SOURCE_BUCK3:
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c,
|
||||
NPM6001_TASKS_STOP_BUCK3, 1U);
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_TASKS_STOP_BUCK3, 1U);
|
||||
case NPM6001_SOURCE_LDO0:
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c,
|
||||
NPM6001_TASKS_STOP_LDO0, 1U);
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_TASKS_STOP_LDO0, 1U);
|
||||
case NPM6001_SOURCE_LDO1:
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c,
|
||||
NPM6001_TASKS_STOP_LDO1, 1U);
|
||||
return i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_TASKS_STOP_LDO1, 1U);
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -570,8 +536,7 @@ static int regulator_npm6001_get_error_flags(const struct device *dev,
|
|||
|
||||
if (val != 0U) {
|
||||
/* clear thermal warning */
|
||||
ret = i2c_reg_write_byte_dt(&pconfig->i2c,
|
||||
NPM6001_EVENTS_THWARN, 0U);
|
||||
ret = i2c_reg_write_byte_dt(&pconfig->i2c, NPM6001_EVENTS_THWARN, 0U);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -649,14 +614,12 @@ static int regulator_npm6001_common_init(const struct device *dev)
|
|||
}
|
||||
|
||||
/* configure pad properties */
|
||||
ret = i2c_reg_write_byte_dt(&config->i2c, NPM6001_BUCKMODEPADCONF,
|
||||
config->buck_pad_val);
|
||||
ret = i2c_reg_write_byte_dt(&config->i2c, NPM6001_BUCKMODEPADCONF, config->buck_pad_val);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = i2c_reg_write_byte_dt(&config->i2c, NPM6001_PADDRIVESTRENGTH,
|
||||
config->pad_val);
|
||||
ret = i2c_reg_write_byte_dt(&config->i2c, NPM6001_PADDRIVESTRENGTH, config->pad_val);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -676,68 +639,55 @@ static const struct regulator_driver_api api = {
|
|||
.get_error_flags = regulator_npm6001_get_error_flags,
|
||||
};
|
||||
|
||||
#define REGULATOR_NPM6001_DEFINE(node_id, id, _source, parent) \
|
||||
static struct regulator_npm6001_data data_##id; \
|
||||
\
|
||||
static const struct regulator_npm6001_config config_##id = { \
|
||||
.common = REGULATOR_DT_COMMON_CONFIG_INIT(node_id), \
|
||||
.p = parent, \
|
||||
.source = _source, \
|
||||
}; \
|
||||
\
|
||||
DEVICE_DT_DEFINE(node_id, regulator_npm6001_init, NULL, &data_##id, \
|
||||
&config_##id, POST_KERNEL, \
|
||||
CONFIG_REGULATOR_NPM6001_INIT_PRIORITY, &api);
|
||||
#define REGULATOR_NPM6001_DEFINE(node_id, id, _source, parent) \
|
||||
static struct regulator_npm6001_data data_##id; \
|
||||
\
|
||||
static const struct regulator_npm6001_config config_##id = { \
|
||||
.common = REGULATOR_DT_COMMON_CONFIG_INIT(node_id), \
|
||||
.p = parent, \
|
||||
.source = _source, \
|
||||
}; \
|
||||
\
|
||||
DEVICE_DT_DEFINE(node_id, regulator_npm6001_init, NULL, &data_##id, &config_##id, \
|
||||
POST_KERNEL, CONFIG_REGULATOR_NPM6001_INIT_PRIORITY, &api);
|
||||
|
||||
#define REGULATOR_NPM6001_DEFINE_COND(inst, child, source, parent) \
|
||||
COND_CODE_1(DT_NODE_EXISTS(DT_INST_CHILD(inst, child)), \
|
||||
(REGULATOR_NPM6001_DEFINE(DT_INST_CHILD(inst, child), \
|
||||
child##inst, source, parent)), \
|
||||
#define REGULATOR_NPM6001_DEFINE_COND(inst, child, source, parent) \
|
||||
COND_CODE_1(DT_NODE_EXISTS(DT_INST_CHILD(inst, child)), \
|
||||
(REGULATOR_NPM6001_DEFINE(DT_INST_CHILD(inst, child), child##inst, source, \
|
||||
parent)), \
|
||||
())
|
||||
|
||||
#define REGULATOR_NPM6001_DEFINE_ALL(inst) \
|
||||
static const struct regulator_npm6001_pconfig config_##inst = { \
|
||||
.i2c = I2C_DT_SPEC_GET(DT_INST_PARENT(inst)), \
|
||||
.buck_pad_val = \
|
||||
((DT_INST_ENUM_IDX(inst, \
|
||||
nordic_buck_mode0_input_type) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE0PADTYPE_CMOS) | \
|
||||
(DT_INST_ENUM_IDX(inst, \
|
||||
nordic_buck_mode1_input_type) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE1PADTYPE_CMOS) | \
|
||||
(DT_INST_ENUM_IDX(inst, \
|
||||
nordic_buck_mode2_input_type) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE2PADTYPE_CMOS) | \
|
||||
(DT_INST_PROP(inst, nordic_buck_mode0_pull_down) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE0PULLD_ENABLED) | \
|
||||
(DT_INST_PROP(inst, nordic_buck_mode1_pull_down) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE1PULLD_ENABLED) | \
|
||||
(DT_INST_PROP(inst, nordic_buck_mode2_pull_down) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE2PULLD_ENABLED)), \
|
||||
.pad_val = ((DT_INST_PROP(inst, nordic_ready_high_drive) * \
|
||||
NPM6001_PADDRIVESTRENGTH_READY_HIGH) | \
|
||||
(DT_INST_PROP(inst, nordic_nint_high_drive) * \
|
||||
NPM6001_PADDRIVESTRENGTH_NINT_HIGH) | \
|
||||
(DT_INST_PROP(inst, nordic_sda_high_drive) * \
|
||||
NPM6001_PADDRIVESTRENGTH_SDA_HIGH)), \
|
||||
}; \
|
||||
\
|
||||
DEVICE_DT_INST_DEFINE(inst, regulator_npm6001_common_init, NULL, NULL, \
|
||||
&config_##inst, POST_KERNEL, \
|
||||
CONFIG_REGULATOR_NPM6001_COMMON_INIT_PRIORITY, \
|
||||
NULL); \
|
||||
\
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, buck0, NPM6001_SOURCE_BUCK0, \
|
||||
DEVICE_DT_INST_GET(inst)) \
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, buck1, NPM6001_SOURCE_BUCK1, \
|
||||
DEVICE_DT_INST_GET(inst)) \
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, buck2, NPM6001_SOURCE_BUCK2, \
|
||||
DEVICE_DT_INST_GET(inst)) \
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, buck3, NPM6001_SOURCE_BUCK3, \
|
||||
DEVICE_DT_INST_GET(inst)) \
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, ldo0, NPM6001_SOURCE_LDO0, \
|
||||
DEVICE_DT_INST_GET(inst)) \
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, ldo1, NPM6001_SOURCE_LDO1, \
|
||||
DEVICE_DT_INST_GET(inst))
|
||||
#define REGULATOR_NPM6001_DEFINE_ALL(inst) \
|
||||
static const struct regulator_npm6001_pconfig config_##inst = { \
|
||||
.i2c = I2C_DT_SPEC_GET(DT_INST_PARENT(inst)), \
|
||||
.buck_pad_val = ((DT_INST_ENUM_IDX(inst, nordic_buck_mode0_input_type) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE0PADTYPE_CMOS) | \
|
||||
(DT_INST_ENUM_IDX(inst, nordic_buck_mode1_input_type) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE1PADTYPE_CMOS) | \
|
||||
(DT_INST_ENUM_IDX(inst, nordic_buck_mode2_input_type) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE2PADTYPE_CMOS) | \
|
||||
(DT_INST_PROP(inst, nordic_buck_mode0_pull_down) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE0PULLD_ENABLED) | \
|
||||
(DT_INST_PROP(inst, nordic_buck_mode1_pull_down) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE1PULLD_ENABLED) | \
|
||||
(DT_INST_PROP(inst, nordic_buck_mode2_pull_down) * \
|
||||
NPM6001_BUCKMODEPADCONF_BUCKMODE2PULLD_ENABLED)), \
|
||||
.pad_val = ((DT_INST_PROP(inst, nordic_ready_high_drive) * \
|
||||
NPM6001_PADDRIVESTRENGTH_READY_HIGH) | \
|
||||
(DT_INST_PROP(inst, nordic_nint_high_drive) * \
|
||||
NPM6001_PADDRIVESTRENGTH_NINT_HIGH) | \
|
||||
(DT_INST_PROP(inst, nordic_sda_high_drive) * \
|
||||
NPM6001_PADDRIVESTRENGTH_SDA_HIGH)), \
|
||||
}; \
|
||||
\
|
||||
DEVICE_DT_INST_DEFINE(inst, regulator_npm6001_common_init, NULL, NULL, &config_##inst, \
|
||||
POST_KERNEL, CONFIG_REGULATOR_NPM6001_COMMON_INIT_PRIORITY, NULL); \
|
||||
\
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, buck0, NPM6001_SOURCE_BUCK0, DEVICE_DT_INST_GET(inst)) \
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, buck1, NPM6001_SOURCE_BUCK1, DEVICE_DT_INST_GET(inst)) \
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, buck2, NPM6001_SOURCE_BUCK2, DEVICE_DT_INST_GET(inst)) \
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, buck3, NPM6001_SOURCE_BUCK3, DEVICE_DT_INST_GET(inst)) \
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, ldo0, NPM6001_SOURCE_LDO0, DEVICE_DT_INST_GET(inst)) \
|
||||
REGULATOR_NPM6001_DEFINE_COND(inst, ldo1, NPM6001_SOURCE_LDO1, DEVICE_DT_INST_GET(inst))
|
||||
|
||||
DT_INST_FOREACH_STATUS_OKAY(REGULATOR_NPM6001_DEFINE_ALL)
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue