michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: arm: nxp: imx-rt: Convert from Kconfig to DT_NODELABEL

Browse source 
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move board pinmux.c code to utilize
DT_NODELABEL instead.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is contained in:
Kumar Gala 2020-04-14 10:25:31 -05:00 • committed by Maureen Helm
commit 542e8c8d09
7 changed files with 54 additions and 54 deletions
Download patch file Download diff file Expand all files Collapse all files

16
boards/arm/mimxrt1020_evk/pinmux.c
View file

@ -8,7 +8,7 @@
#include <fsl_iomuxc.h>
#include <fsl_gpio.h>
#ifdef CONFIG_ETH_MCUX_0
#if DT_HAS_NODE(DT_NODELABEL(enet))
static gpio_pin_config_t enet_gpio_config = {
.direction = kGPIO_DigitalOutput,
.outputLogic = 0,
@ -34,7 +34,7 @@ static int mimxrt1020_evk_init(struct device *dev)
/* SW0 */
IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0);
#ifdef CONFIG_UART_MCUX_LPUART_1
#if DT_HAS_NODE(DT_NODELABEL(lpuart1))
/* LPUART1 TX/RX */
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_06_LPUART1_TX, 0);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0);
@ -50,7 +50,7 @@ static int mimxrt1020_evk_init(struct device *dev)
IOMUXC_SW_PAD_CTL_PAD_DSE(6));
#endif
#ifdef CONFIG_UART_MCUX_LPUART_2
#if DT_HAS_NODE(DT_NODELABEL(lpuart2))
/* LPUART2 TX/RX */
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_LPUART2_TX, 0);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_LPUART2_RX, 0);
@ -66,7 +66,7 @@ static int mimxrt1020_evk_init(struct device *dev)
IOMUXC_SW_PAD_CTL_PAD_DSE(6));
#endif
#ifdef CONFIG_I2C_1
#if DT_HAS_NODE(DT_NODELABEL(lpi2c1))
/* LPI2C1 SCL, SDA */
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_LPI2C1_SCL, 1);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_LPI2C1_SDA, 1);
@ -86,7 +86,7 @@ static int mimxrt1020_evk_init(struct device *dev)
IOMUXC_SW_PAD_CTL_PAD_DSE(6));
#endif
#ifdef CONFIG_I2C_4
#if DT_HAS_NODE(DT_NODELABEL(lpi2c4))
/* LPI2C4 SCL, SDA */
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_02_LPI2C4_SCL, 1);
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_03_LPI2C4_SDA, 1);
@ -106,7 +106,7 @@ static int mimxrt1020_evk_init(struct device *dev)
IOMUXC_SW_PAD_CTL_PAD_DSE(6));
#endif
#ifdef CONFIG_ETH_MCUX_0
#if DT_HAS_NODE(DT_NODELABEL(enet))
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_10_ENET_RDATA00, 0);
@ -147,7 +147,7 @@ static int mimxrt1020_evk_init(struct device *dev)
return 0;
}
#ifdef CONFIG_ETH_MCUX_0
#if DT_HAS_NODE(DT_NODELABEL(enet))
static int mimxrt1020_evk_phy_reset(struct device *dev)
{
/* RESET PHY chip. */
@ -159,6 +159,6 @@ static int mimxrt1020_evk_phy_reset(struct device *dev)
#endif
SYS_INIT(mimxrt1020_evk_init, PRE_KERNEL_1, 0);
#ifdef CONFIG_ETH_MCUX_0
#if DT_HAS_NODE(DT_NODELABEL(enet))
SYS_INIT(mimxrt1020_evk_phy_reset, PRE_KERNEL_2, 0);
#endif