michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: regulator: regulator_pmic: Update driver to use i2c_dt_spec

Browse source 
Simplify driver by using i2c_dt_spec for bus access.

Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
This commit is contained in:
Benjamin Björnsson 2022-07-15 14:54:09 +02:00 • committed by Fabio Baltieri
commit 4e841aea8d
1 changed files with 9 additions and 15 deletions
Download patch file Download diff file Expand all files Collapse all files

24
drivers/regulator/regulator_pmic.c
View file

@ -53,8 +53,7 @@ struct regulator_config {
bool enable_inverted;
uint8_t ilim_reg;
uint8_t ilim_mask;
uint8_t i2c_address;
const struct device *i2c_dev;
struct i2c_dt_spec i2c;
uint32_t *voltage_array;
uint32_t *current_array;
};
@ -69,17 +68,15 @@ static int regulator_modify_register(const struct regulator_config *conf,
uint8_t reg_current;
int rc;
rc = i2c_reg_read_byte(conf->i2c_dev, conf->i2c_address,
reg, &reg_current);
rc = i2c_reg_read_byte_dt(&conf->i2c, reg, &reg_current);
if (rc) {
return rc;
}
reg_current &= ~reg_mask;
reg_current |= reg_val;
LOG_DBG("Writing 0x%02X to reg 0x%02X at I2C addr 0x%02X",
reg_current, reg, conf->i2c_address);
return i2c_reg_write_byte(conf->i2c_dev, conf->i2c_address, reg,
reg_current);
LOG_DBG("Writing 0x%02X to reg 0x%02X at I2C addr 0x%02X", reg_current, reg,
conf->i2c.addr);
return i2c_reg_write_byte_dt(&conf->i2c, reg, reg_current);
}
@ -165,8 +162,7 @@ int regulator_get_voltage(const struct device *dev)
int rc, i = 0;
uint8_t raw_reg;
rc = i2c_reg_read_byte(config->i2c_dev, config->i2c_address,
config->vsel_reg, &raw_reg);
rc = i2c_reg_read_byte_dt(&config->i2c, config->vsel_reg, &raw_reg);
if (rc) {
return rc;
}
@ -225,8 +221,7 @@ int regulator_get_current_limit(const struct device *dev)
if (config->num_current_levels == 0) {
return -ENOTSUP;
}
rc = i2c_reg_read_byte(config->i2c_dev, config->i2c_address,
config->ilim_reg, &raw_reg);
rc = i2c_reg_read_byte_dt(&config->i2c, config->ilim_reg, &raw_reg);
if (rc) {
return rc;
}
@ -301,7 +296,7 @@ static int pmic_reg_init(const struct device *dev)
/* Do the same cast for current limit ranges */
data->current_levels = (struct current_range *)config->current_array;
/* Check to verify we have a valid I2C device */
if (!device_is_ready(config->i2c_dev)) {
if (!device_is_ready(config->i2c.bus)) {
return -ENODEV;
}
return 0;
@ -332,8 +327,7 @@ static const struct regulator_driver_api api = {
.ilim_reg = DT_INST_PROP_OR(id, ilim_reg, 0), \
.ilim_mask = DT_INST_PROP_OR(id, ilim_mask, 0), \
.enable_inverted = DT_INST_PROP(id, enable_inverted), \
.i2c_address = DT_REG_ADDR(DT_INST_PARENT(id)), \
.i2c_dev = DEVICE_DT_GET(DT_BUS(DT_INST_PARENT(id))), \
.i2c = I2C_DT_SPEC_INST_GET(id), \
.voltage_array = pmic_reg_##id##_vol_range, \
.current_array = pmic_reg_##id##_cur_limits, \
}; \