display: ssd16xx: convert to spi_dt_spec

Convert SPI usage to `struct spi_dt_spec`.

Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit is contained in:
Jordan Yates 2021-08-01 17:08:30 +10:00 committed by Carles Cufí
commit 4d6d50e2bc

View file

@ -25,16 +25,9 @@ LOG_MODULE_REGISTER(ssd16xx);
* SSD1673, SSD1608, SSD1681, ILI3897 compatible EPD controller driver. * SSD1673, SSD1608, SSD1681, ILI3897 compatible EPD controller driver.
*/ */
#define SSD16XX_SPI_FREQ DT_INST_PROP(0, spi_max_frequency)
#define SSD16XX_BUS_NAME DT_INST_BUS_LABEL(0)
#define SSD16XX_DC_PIN DT_INST_GPIO_PIN(0, dc_gpios) #define SSD16XX_DC_PIN DT_INST_GPIO_PIN(0, dc_gpios)
#define SSD16XX_DC_FLAGS DT_INST_GPIO_FLAGS(0, dc_gpios) #define SSD16XX_DC_FLAGS DT_INST_GPIO_FLAGS(0, dc_gpios)
#define SSD16XX_DC_CNTRL DT_INST_GPIO_LABEL(0, dc_gpios) #define SSD16XX_DC_CNTRL DT_INST_GPIO_LABEL(0, dc_gpios)
#define SSD16XX_CS_PIN DT_INST_SPI_DEV_CS_GPIOS_PIN(0)
#define SSD16XX_CS_FLAGS DT_INST_SPI_DEV_CS_GPIOS_FLAGS(0)
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
#define SSD16XX_CS_CNTRL DT_INST_SPI_DEV_CS_GPIOS_LABEL(0)
#endif
#define SSD16XX_BUSY_PIN DT_INST_GPIO_PIN(0, busy_gpios) #define SSD16XX_BUSY_PIN DT_INST_GPIO_PIN(0, busy_gpios)
#define SSD16XX_BUSY_CNTRL DT_INST_GPIO_LABEL(0, busy_gpios) #define SSD16XX_BUSY_CNTRL DT_INST_GPIO_LABEL(0, busy_gpios)
#define SSD16XX_BUSY_FLAGS DT_INST_GPIO_FLAGS(0, busy_gpios) #define SSD16XX_BUSY_FLAGS DT_INST_GPIO_FLAGS(0, busy_gpios)
@ -62,15 +55,15 @@ struct ssd16xx_data {
const struct device *reset; const struct device *reset;
const struct device *dc; const struct device *dc;
const struct device *busy; const struct device *busy;
const struct device *spi_dev; const struct ssd16xx_config *config;
struct spi_config spi_config;
#if defined(SSD16XX_CS_CNTRL)
struct spi_cs_control cs_ctrl;
#endif
uint8_t scan_mode; uint8_t scan_mode;
uint8_t update_cmd; uint8_t update_cmd;
}; };
struct ssd16xx_config {
struct spi_dt_spec bus;
};
#if DT_INST_NODE_HAS_PROP(0, lut_initial) #if DT_INST_NODE_HAS_PROP(0, lut_initial)
static uint8_t ssd16xx_lut_initial[] = DT_INST_PROP(0, lut_initial); static uint8_t ssd16xx_lut_initial[] = DT_INST_PROP(0, lut_initial);
#endif #endif
@ -91,7 +84,7 @@ static inline int ssd16xx_write_cmd(struct ssd16xx_data *driver,
struct spi_buf_set buf_set = {.buffers = &buf, .count = 1}; struct spi_buf_set buf_set = {.buffers = &buf, .count = 1};
gpio_pin_set(driver->dc, SSD16XX_DC_PIN, 1); gpio_pin_set(driver->dc, SSD16XX_DC_PIN, 1);
err = spi_write(driver->spi_dev, &driver->spi_config, &buf_set); err = spi_write_dt(&driver->config->bus, &buf_set);
if (err < 0) { if (err < 0) {
return err; return err;
} }
@ -100,7 +93,7 @@ static inline int ssd16xx_write_cmd(struct ssd16xx_data *driver,
buf.buf = data; buf.buf = data;
buf.len = len; buf.len = len;
gpio_pin_set(driver->dc, SSD16XX_DC_PIN, 0); gpio_pin_set(driver->dc, SSD16XX_DC_PIN, 0);
err = spi_write(driver->spi_dev, &driver->spi_config, &buf_set); err = spi_write_dt(&driver->config->bus, &buf_set);
if (err < 0) { if (err < 0) {
return err; return err;
} }
@ -643,21 +636,16 @@ static int ssd16xx_controller_init(const struct device *dev)
static int ssd16xx_init(const struct device *dev) static int ssd16xx_init(const struct device *dev)
{ {
const struct ssd16xx_config *config = dev->config;
struct ssd16xx_data *driver = dev->data; struct ssd16xx_data *driver = dev->data;
LOG_DBG(""); LOG_DBG("");
driver->spi_dev = device_get_binding(SSD16XX_BUS_NAME); if (!spi_is_ready(&config->bus)) {
if (driver->spi_dev == NULL) { LOG_ERR("SPI bus %s not ready", config->bus.bus->name);
LOG_ERR("Could not get SPI device for SSD16XX"); return -ENODEV;
return -EIO;
} }
driver->spi_config.frequency = SSD16XX_SPI_FREQ;
driver->spi_config.operation = SPI_OP_MODE_MASTER | SPI_WORD_SET(8);
driver->spi_config.slave = DT_INST_REG_ADDR(0);
driver->spi_config.cs = NULL;
driver->reset = device_get_binding(SSD16XX_RESET_CNTRL); driver->reset = device_get_binding(SSD16XX_RESET_CNTRL);
if (driver->reset == NULL) { if (driver->reset == NULL) {
LOG_ERR("Could not get GPIO port for SSD16XX reset"); LOG_ERR("Could not get GPIO port for SSD16XX reset");
@ -685,23 +673,17 @@ static int ssd16xx_init(const struct device *dev)
gpio_pin_configure(driver->busy, SSD16XX_BUSY_PIN, gpio_pin_configure(driver->busy, SSD16XX_BUSY_PIN,
GPIO_INPUT | SSD16XX_BUSY_FLAGS); GPIO_INPUT | SSD16XX_BUSY_FLAGS);
#if defined(SSD16XX_CS_CNTRL)
driver->cs_ctrl.gpio_dev = device_get_binding(SSD16XX_CS_CNTRL);
if (!driver->cs_ctrl.gpio_dev) {
LOG_ERR("Unable to get SPI GPIO CS device");
return -EIO;
}
driver->cs_ctrl.gpio_pin = SSD16XX_CS_PIN;
driver->cs_ctrl.gpio_dt_flags = SSD16XX_CS_FLAGS;
driver->cs_ctrl.delay = 0U;
driver->spi_config.cs = &driver->cs_ctrl;
#endif
return ssd16xx_controller_init(dev); return ssd16xx_controller_init(dev);
} }
static struct ssd16xx_data ssd16xx_driver; static const struct ssd16xx_config ssd16xx_config = {
.bus = SPI_DT_SPEC_INST_GET(
0, SPI_OP_MODE_MASTER | SPI_WORD_SET(8), 0)
};
static struct ssd16xx_data ssd16xx_driver = {
.config = &ssd16xx_config
};
static struct display_driver_api ssd16xx_driver_api = { static struct display_driver_api ssd16xx_driver_api = {
.blanking_on = ssd16xx_blanking_on, .blanking_on = ssd16xx_blanking_on,