diff --git a/boards/arm/adafruit_feather_stm32f405/doc/index.rst b/boards/arm/adafruit_feather_stm32f405/doc/index.rst
index 7f2b2012d6b..8d6fb89afa3 100644
--- a/boards/arm/adafruit_feather_stm32f405/doc/index.rst
+++ b/boards/arm/adafruit_feather_stm32f405/doc/index.rst
@@ -101,8 +101,7 @@ of the built in DFU-Util bootloader is possible by following the
 Flashing
 ========
 
-#. Build the Zephyr kernel and the :ref:`blinky-sample` sample
-application:
+#. Build the Zephyr kernel and the :ref:`blinky-sample` sample application:
 
    .. zephyr-app-commands::
       :zephyr-app: samples/basic/blinky
@@ -110,8 +109,8 @@ application:
       :goals: build
       :compact:
 
-#. On the Adafruit Feather STM32F405, connect the 3.3V pin to the B0
-boot pin with a jumper wire.
+#. On the Adafruit Feather STM32F405, connect the 3.3V pin to the B0 boot pin
+   with a jumper wire.
 
 #. Flash the image:
 
diff --git a/boards/arm/bl654_usb/doc/bl654_usb.rst b/boards/arm/bl654_usb/doc/bl654_usb.rst
index 3a2620340b1..1d187ed265c 100644
--- a/boards/arm/bl654_usb/doc/bl654_usb.rst
+++ b/boards/arm/bl654_usb/doc/bl654_usb.rst
@@ -121,7 +121,7 @@ bootloader and flash them to the device. Make sure ``nrfutil`` is installed
 before proceeding. These instructions were tested with version 6.1.0.
 
 #. With the adapter plugged in, reset the board into the bootloader by pressing
-the RESET button.
+   the RESET button.
 
    The push button is in a pin-hole on the logo side of the USB adapter.
 
diff --git a/boards/arm/cy8ckit_062_ble/doc/index.rst b/boards/arm/cy8ckit_062_ble/doc/index.rst
index 762835861c2..3e07a8780ee 100644
--- a/boards/arm/cy8ckit_062_ble/doc/index.rst
+++ b/boards/arm/cy8ckit_062_ble/doc/index.rst
@@ -238,7 +238,7 @@ revision (0.0.0) allows use of default connections.  The use of Arduino headers
 are only possible after rework the board and using the revision 1.0.0.
 
 #. Build the Zephyr kernel and the :ref:`hello_world` sample application for
-board revision 1.0.0:
+   board revision 1.0.0:
 
    .. zephyr-app-commands::
       :zephyr-app: samples/hello_world
diff --git a/boards/arm/rak4631_nrf52840/doc/index.rst b/boards/arm/rak4631_nrf52840/doc/index.rst
index 475f4aea163..63b330e68b8 100644
--- a/boards/arm/rak4631_nrf52840/doc/index.rst
+++ b/boards/arm/rak4631_nrf52840/doc/index.rst
@@ -123,7 +123,7 @@ Flashing
    - Stop bits: 1
 
 #. Connect the RAK4631 board to your host computer using the USB debug port.
-Then build and flash the :ref:`hello_world` application.
+   Then build and flash the :ref:`hello_world` application.
 
    .. zephyr-app-commands::
       :zephyr-app: samples/hello_world
diff --git a/boards/arm/rak5010_nrf52840/doc/index.rst b/boards/arm/rak5010_nrf52840/doc/index.rst
index 3ceccc1db9a..8ed2fb2cd22 100644
--- a/boards/arm/rak5010_nrf52840/doc/index.rst
+++ b/boards/arm/rak5010_nrf52840/doc/index.rst
@@ -127,7 +127,7 @@ Flashing
    - Stop bits: 1
 
 #. Connect the RAK5010 board to your host computer using the USB debug port.
-Then build and flash the :ref:`hello_world` application.
+   Then build and flash the :ref:`hello_world` application.
 
    .. zephyr-app-commands::
       :zephyr-app: samples/hello_world
diff --git a/boards/arm/sam4l_ek/doc/index.rst b/boards/arm/sam4l_ek/doc/index.rst
index bcf42d9635e..6bc5e39900e 100644
--- a/boards/arm/sam4l_ek/doc/index.rst
+++ b/boards/arm/sam4l_ek/doc/index.rst
@@ -137,7 +137,7 @@ Flashing
    - Stop bits: 1
 
 #. Connect the SAM4L-EK board to your host computer using the USB debug port.
-Then build and flash the :ref:`hello_world` application.
+   Then build and flash the :ref:`hello_world` application.
 
    .. zephyr-app-commands::
       :zephyr-app: samples/hello_world